Log opened at Tue, Jan 04 2022 03:35:48 UTC (actual time)
Current log level is Normal
ACP Expert Scheduler Engine Version 8.3.2
Part of ACP Expert Release 8.3
Full license: Arne Henden
2022-01-04 03:35:48.4: REAL TIME internal clock initialized at 04-Jan-2022 03:35:48 UTC
2022-01-04 03:35:48.4: Dispatcher started at 04-Jan-2022 03:35:48 UTC
2022-01-04 03:35:48.5: Loaded Constraint plugin AirMass
2022-01-04 03:35:48.5: Loaded Constraint plugin AirmassRange
2022-01-04 03:35:48.5: Loaded Constraint plugin Horizon
2022-01-04 03:35:48.5: Loaded Constraint plugin HourAngle
2022-01-04 03:35:48.5: Loaded Constraint plugin MoonAvoid
2022-01-04 03:35:48.5: Loaded Constraint plugin MoonDown
2022-01-04 03:35:48.5: Loaded Constraint plugin SkyCondition
2022-01-04 03:35:48.5: Loaded Constraint plugin TimeRange
2022-01-04 03:35:49.4: 184 plans are now pending.
2022-01-04 03:35:49.5: Attach ACP sequencer
2022-01-04 03:38:16.6: ++ Weather Safe ++
2022-01-04 03:38:17.0: ==== Dispatcher is running in NORMAL (NIGHT) mode ====
2022-01-04 03:38:17.0: Sequencer does sky flats
2022-01-04 03:38:18.7: HTTP command listener failed to start: Access is denied
2022-01-04 03:38:18.7:   If this is Windows 8-10, you will need to add permission (ACL) to listen on port 9123.
2022-01-04 03:38:18.7:   See Scheduler Help > Configuring the Program > Noteworthy Configuration Options, at the bottom.
2022-01-04 03:39:36.3: ++ Observatory Startup ++
2022-01-04 03:39:36.3: Weather safety is now disabled
2022-01-04 03:39:36.3: Start ACP Sequencer's StartupObs script
2022-01-04 03:40:22.9: Weather safety is re-enabled
2022-01-04 03:40:22.9: Observatory startup succeeded
2022-01-04 03:40:22.9: ++ Auto Focus ++
2022-01-04 03:40:22.9: Doing initial autofocus.
2022-01-04 03:40:23.0: Start special ACP AutoFocus script for scheduler
2022-01-04 03:41:41.4: ** ACP script "AutoFocusScheduler" failed:
2022-01-04 03:41:41.4: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 81 column 2.

2022-01-04 03:41:41.4: ** Autofocus failed (n=1), will retry ASAP after 0 min.
2022-01-04 03:41:51.5: Dispatcher cycle time: 10.1 sec.
2022-01-04 03:41:51.5: Acquire data for Observation GZ_Cet...
2022-01-04 03:41:51.5:   (belongs to Project AAVSO_survey_HQ_AUTO_ver2706, Plan GZ_Cet)
2022-01-04 03:41:51.5: ++ Auto Focus ++
2022-01-04 03:41:51.6: Doing periodic autofocus.
2022-01-04 03:41:51.6: Start special ACP AutoFocus script for scheduler
2022-01-04 03:42:06.6: ** ACP script "AutoFocusScheduler" failed:
2022-01-04 03:42:06.6: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 77 column 9.

2022-01-04 03:42:06.6: ** Autofocus failed (n=2), will retry ASAP after 5 min.
2022-01-04 03:42:06.6: Send Observation GZ_Cet to ACP Sequencer
2022-01-04 03:42:32.3: ** ACP script "AcquireScheduler" failed:
2022-01-04 03:42:32.3: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2094 column 9.

2022-01-04 03:42:32.3: ACP ERROR: Run failed due to script error (see ACP run log)
2022-01-04 03:42:32.3: ACP data acquisition failed for Observation GZ_Cet.
2022-01-04 03:42:32.3:   (Observation GZ_Cet interrupted by acquisition process failure.)
2022-01-04 03:42:34.4: Dispatcher cycle time: 1.9 sec.
2022-01-04 03:42:34.4: Acquire data for Observation V630_Cas...
2022-01-04 03:42:34.4:   (belongs to Project AAVSO_survey_HQ_AUTO_ver2706, Plan V630_Cas)
2022-01-04 03:42:34.4: Send Observation V630_Cas to ACP Sequencer
2022-01-04 03:42:54.8: ** ACP script "AcquireScheduler" failed:
2022-01-04 03:42:54.8: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2094 column 9.

2022-01-04 03:42:54.8: ACP ERROR: Run failed due to script error (see ACP run log)
2022-01-04 03:42:54.8: ACP data acquisition failed for Observation V630_Cas.
2022-01-04 03:42:54.8:   (Observation V630_Cas interrupted by acquisition process failure.)
2022-01-04 03:42:57.0: Dispatcher cycle time: 2.0 sec.
2022-01-04 03:42:57.0: Acquire data for Observation DW_Cas...
2022-01-04 03:42:57.0:   (belongs to Project AAVSO_survey_HQ_AUTO_ver2706, Plan DW_Cas)
2022-01-04 03:42:57.0: Send Observation DW_Cas to ACP Sequencer
2022-01-04 03:43:28.2: ** ACP script "AcquireScheduler" failed:
2022-01-04 03:43:28.2: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2094 column 9.

2022-01-04 03:43:28.2: ACP ERROR: Run failed due to script error (see ACP run log)
2022-01-04 03:43:28.2: ACP data acquisition failed for Observation DW_Cas.
2022-01-04 03:43:28.2:   (Observation DW_Cas interrupted by acquisition process failure.)
2022-01-04 03:43:30.3: Dispatcher cycle time: 1.9 sec.
2022-01-04 03:43:30.3: Acquire data for Observation KK_Cas...
2022-01-04 03:43:30.3:   (belongs to Project AAVSO_survey_HQ_AUTO_ver2706, Plan KK_Cas)
2022-01-04 03:43:30.3: Send Observation KK_Cas to ACP Sequencer
2022-01-04 03:44:00.0: ** ACP script "AcquireScheduler" failed:
2022-01-04 03:44:00.0: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2094 column 9.

2022-01-04 03:44:00.0: ACP ERROR: Run failed due to script error (see ACP run log)
2022-01-04 03:44:00.0: ACP data acquisition failed for Observation KK_Cas.
2022-01-04 03:44:00.0:   (Observation KK_Cas interrupted by acquisition process failure.)
2022-01-04 03:44:02.1: Dispatcher cycle time: 1.9 sec.
2022-01-04 03:44:02.1: Acquire data for Observation CGCS_5926...
2022-01-04 03:44:02.1:   (belongs to Project AAVSO_survey_HQ_AUTO_ver2706, Plan CGCS_5926)
2022-01-04 03:44:02.1: Send Observation CGCS_5926 to ACP Sequencer
2022-01-04 03:44:22.6: ** ACP script "AcquireScheduler" failed:
2022-01-04 03:44:22.6: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2094 column 9.

2022-01-04 03:44:22.6: ACP ERROR: Run failed due to script error (see ACP run log)
2022-01-04 03:44:22.6: ACP data acquisition failed for Observation CGCS_5926.
2022-01-04 03:44:22.6:   (Observation CGCS_5926 interrupted by acquisition process failure.)
2022-01-04 03:44:25.3: Dispatcher cycle time: 2.0 sec.
2022-01-04 03:44:25.3: Acquire data for Observation BO_Cep...
2022-01-04 03:44:25.3:   (belongs to Project AAVSO_MISC_HQA_AUTO_ver2706, Plan BO_Cep)
2022-01-04 03:44:25.3: Send Observation BO_Cep to ACP Sequencer
2022-01-04 03:44:51.9: ** ACP script "AcquireScheduler" failed:
2022-01-04 03:44:51.9: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2094 column 9.

2022-01-04 03:44:51.9: ACP ERROR: Run failed due to script error (see ACP run log)
2022-01-04 03:44:51.9: ACP data acquisition failed for Observation BO_Cep.
2022-01-04 03:44:51.9:   (Observation BO_Cep interrupted by acquisition process failure.)
2022-01-04 03:44:54.3: Dispatcher cycle time: 2.2 sec.
2022-01-04 03:44:54.3: Acquire data for Observation V407_Cas...
2022-01-04 03:44:54.3:   (belongs to Project AAVSO_survey_HQ_AUTO_ver2706, Plan V407_Cas)
2022-01-04 03:44:54.3: Send Observation V407_Cas to ACP Sequencer
2022-01-04 03:53:03.0: **DISPATCHER INTERRUPT LEVEL 1 RECEIVED**
2022-01-04 03:53:09.9: ** ACP script "AcquireScheduler" failed:
2022-01-04 03:53:09.9: **Script Error**
Source:   ACP
Message:  The script was aborted.
Location: line 1487 column 13.

2022-01-04 03:53:09.9: RUN FAILED: Scheduler was stopped during run
2022-01-04 03:53:10.0: ACP data acquisition failed for Observation V407_Cas.
2022-01-04 03:53:10.0:   (Observation V407_Cas interrupted by operator or system.)
2022-01-04 03:53:39.6: ++ Observatory Startup ++
2022-01-04 03:53:39.6: Weather safety is now disabled
2022-01-04 03:53:39.6: Start ACP Sequencer's StartupObs script
2022-01-04 03:54:23.3: Weather safety is re-enabled
2022-01-04 03:54:23.4: Observatory startup succeeded
2022-01-04 03:54:23.4: ++ Auto Focus ++
2022-01-04 03:54:23.4: Doing initial autofocus.
2022-01-04 03:54:23.4: Start special ACP AutoFocus script for scheduler
2022-01-04 03:55:27.0: ** ACP script "AutoFocusScheduler" failed:
2022-01-04 03:55:27.0: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 81 column 2.

2022-01-04 03:55:27.0: ** Autofocus failed (n=1), will retry ASAP after 0 min.
2022-01-04 03:55:36.1: Dispatcher cycle time: 9.1 sec.
2022-01-04 03:55:36.1: Acquire data for Observation GZ_Cet...
2022-01-04 03:55:36.1:   (belongs to Project AAVSO_MISC_HQA_AUTO_ver2706, Plan GZ_Cet)
2022-01-04 03:55:36.1: ++ Auto Focus ++
2022-01-04 03:55:36.2: Doing periodic autofocus.
2022-01-04 03:55:36.2: Start special ACP AutoFocus script for scheduler
2022-01-04 03:56:14.1: ** ACP script "AutoFocusScheduler" failed:
2022-01-04 03:56:14.1: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 77 column 9.

2022-01-04 03:56:14.1: ** Autofocus failed (n=2), will retry ASAP after 5 min.
2022-01-04 03:56:14.1: Send Observation GZ_Cet to ACP Sequencer
2022-01-04 03:56:29.2: ** ACP script "AcquireScheduler" failed:
2022-01-04 03:56:29.2: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2094 column 9.

2022-01-04 03:56:29.2: ACP ERROR: Run failed due to script error (see ACP run log)
2022-01-04 03:56:29.2: ACP data acquisition failed for Observation GZ_Cet.
2022-01-04 03:56:29.2:   (Observation GZ_Cet interrupted by acquisition process failure.)
2022-01-04 03:56:31.3: Dispatcher cycle time: 1.9 sec.
2022-01-04 03:56:31.3: Acquire data for Observation AZ_Cas...
2022-01-04 03:56:31.3:   (belongs to Project AAVSO_MISC_HQA_AUTO_ver2706, Plan AZ_Cas)
2022-01-04 03:56:31.3: Send Observation AZ_Cas to ACP Sequencer
2022-01-04 03:56:46.3: ** ACP script "AcquireScheduler" failed:
2022-01-04 03:56:46.3: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2094 column 9.

2022-01-04 03:56:46.3: ACP ERROR: Run failed due to script error (see ACP run log)
2022-01-04 03:56:46.4: ACP data acquisition failed for Observation AZ_Cas.
2022-01-04 03:56:46.4:   (Observation AZ_Cas interrupted by acquisition process failure.)
2022-01-04 03:56:48.4: Dispatcher cycle time: 1.9 sec.
2022-01-04 03:56:48.4: Acquire data for Observation V630_Cas...
2022-01-04 03:56:48.4:   (belongs to Project AAVSO_MISC_PYG_AUTO_ver2706, Plan V630_Cas)
2022-01-04 03:56:48.4: Send Observation V630_Cas to ACP Sequencer
2022-01-04 03:57:29.7: ** ACP script "AcquireScheduler" failed:
2022-01-04 03:57:29.7: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2094 column 9.

2022-01-04 03:57:29.7: ACP ERROR: Run failed due to script error (see ACP run log)
2022-01-04 03:57:29.7: ACP data acquisition failed for Observation V630_Cas.
2022-01-04 03:57:29.7:   (Observation V630_Cas interrupted by acquisition process failure.)
2022-01-04 03:57:32.0: Dispatcher cycle time: 2.1 sec.
2022-01-04 03:57:32.0: Acquire data for Observation TT_Ari...
2022-01-04 03:57:32.0:   (belongs to Project AAVSO_survey_HQ_AUTO_ver2706, Plan TT_Ari)
2022-01-04 03:57:32.0: Send Observation TT_Ari to ACP Sequencer
2022-01-04 04:23:50.5: Acquisition time: 1578.4605373 sec.
2022-01-04 04:23:50.5: Data for Observation TT_Ari of Plan TT_Ari acquired successfully.
2022-01-04 04:23:50.6: Plan TT_Ari completed successfully.
2022-01-04 04:23:50.6: Image Efficiency: 68.3%
2022-01-04 04:23:50.6: Cycle Efficiency: 99.9%
2022-01-04 04:23:50.7: ++ Auto Focus ++
2022-01-04 04:23:50.8: Doing periodic autofocus.
2022-01-04 04:23:50.8: Start special ACP AutoFocus script for scheduler
2022-01-04 04:27:23.4: **DISPATCHER INTERRUPT LEVEL 1 RECEIVED**
2022-01-04 04:27:29.9: ** ACP script "AutoFocusScheduler" failed:
2022-01-04 04:27:29.9: **Script Error**
Source:   ACP
Message:  The script was aborted.
Location: line 81 column 2.

2022-01-04 04:27:29.9: ** Autofocus failed (n=3), will retry ASAP after 10 min.
2022-01-04 04:43:36.9: -- Weather Unsafe --
2022-01-04 04:44:05.9: ConnectWeather() failed:
2022-01-04 04:44:05.9:  ACP.BoltwoodFile -> Weather data file is stale (> 60 sec old)
2022-01-04 04:44:09.7: **EXCEPTION IN SCHEDULER:
2022-01-04 04:44:09.7: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
2022-01-04 04:44:10.8: Traceback:
   at ACP.UtilClass.get_Scheduler()
   at DC3.Scheduler.ACPSequencer.set_DispatcherStatus(StatusValue value)
   at DC3.Scheduler.Engine.set_Status(StatusValue value)
   at DC3.Scheduler.Engine.Run()
2022-01-04 04:44:10.8: DOME/ROOF FAILURE: In addition, attempting to close your dome/roof this error occurred:
2022-01-04 04:44:10.8: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)