Log opened at Fri, Nov 01 2019 18:58:21 UTC (actual time) Current log level is Debug ACP Expert Scheduler version 8.2.3 Full license: Arne Henden 2019-11-02 01:01:41.4: ++ Weather Safe ++ 2019-11-02 01:01:42.5: ++ Observatory Startup ++ 2019-11-02 01:01:42.5: Startup attempted, but no StartupObs script found 2019-11-02 01:01:42.5: Observatory startup succeeded 2019-11-02 01:11:23.4: ++ Auto Focus ++ 2019-11-02 01:11:23.5: Doing initial autofocus. 2019-11-02 01:11:23.5: Start special ACP AutoFocus script for scheduler 2019-11-02 01:11:23.5: ACP.RunScript(AutoFocusScheduler, ): 2019-11-02 01:11:23.5: Script ShutdownObs is loaded, and 2019-11-02 01:11:23.5: the console is idle. 2019-11-02 01:11:23.5: In start loop, i = 0 2019-11-02 01:11:23.5: Console is now idle 2019-11-02 01:11:23.6: Loaded C:\Program Files (x86)\ACP Scheduler\AutoFocusScheduler.vbs successfully 2019-11-02 01:11:23.6: Script started successfully 2019-11-02 01:11:33.6: Sequencer is now active 2019-11-02 01:11:38.7: Sequencer is no longer active 2019-11-02 01:11:38.7: ** ACP script "AutoFocusScheduler" failed: 2019-11-02 01:11:38.7: **Script Error** Source: ACP Message: The telescope is not connected. Location: line 42 column 5. 2019-11-02 01:11:38.7: ** Autofocus failed (n=1), will retry ASAP after 0 min. 2019-11-02 01:11:38.7: Plan KH15D has Monitor Mode. Time to resubmit it. 2019-11-02 01:11:38.7: Plan Test has Monitor Mode. Time to resubmit it. 2019-11-02 01:11:38.7: Plan KH15D-B has Monitor Mode. Time to resubmit it. 2019-11-02 01:11:38.7: SelectRunning: No running plans 2019-11-02 01:11:38.7: Obs KH15D in Plan KH15D was vetoed by AirMass constraint. 2019-11-02 01:11:38.7: AirMass estimates ready after 02-Nov-2019 07:01:07 UTC 2019-11-02 01:11:38.7: Obs KH15D-B in Plan KH15D-B was vetoed by AirMass constraint. 2019-11-02 01:11:38.7: AirMass estimates ready after 02-Nov-2019 07:01:07 UTC 2019-11-02 01:11:38.8: Efficiency: Selecting from 2 pending plans: 2019-11-02 01:11:38.8: Selected Plan SA109 (TotEff=0.00) 2019-11-02 01:11:38.9: Dispatcher cycle time: 0.2 sec. 2019-11-02 01:11:38.9: Acquire data for Observation SA109... 2019-11-02 01:11:38.9: (belongs to Project Landolt fields, Plan SA109) 2019-11-02 01:11:38.9: Doing 3 sets 2019-11-02 01:11:38.9: ++ Auto Focus ++ 2019-11-02 01:11:38.9: Doing periodic autofocus. 2019-11-02 01:11:38.9: Start special ACP AutoFocus script for scheduler 2019-11-02 01:11:38.9: ACP.RunScript(AutoFocusScheduler, ): 2019-11-02 01:11:38.9: Script AutoFocusScheduler is loaded, and 2019-11-02 01:11:38.9: the console is idle. 2019-11-02 01:11:38.9: In start loop, i = 0 2019-11-02 01:11:38.9: Console is now idle 2019-11-02 01:11:38.9: Loaded C:\Program Files (x86)\ACP Scheduler\AutoFocusScheduler.vbs successfully 2019-11-02 01:11:38.9: Script started successfully 2019-11-02 01:11:48.9: Sequencer is now active 2019-11-02 01:11:54.0: Sequencer is no longer active 2019-11-02 01:11:54.0: ** ACP script "AutoFocusScheduler" failed: 2019-11-02 01:11:54.0: **Script Error** Source: ACP Message: The telescope is not connected. Location: line 42 column 5. 2019-11-02 01:11:54.0: ** Autofocus failed (n=2), will retry ASAP after 5 min. 2019-11-02 01:11:54.1: **EXCEPTION IN SCHEDULER: 2019-11-02 01:11:54.1: The telescope is not connected. 2019-11-02 01:11:54.4: Traceback: at ACP.TelescopeClass.get_SlewSettleTime() at DC3.Scheduler.ACPSequencer.AcquireData(Observation Obs) at DC3.Scheduler.Engine.DoSchedulePass() at DC3.Scheduler.Engine.Run() 2019-11-02 01:11:54.5: No operator intervention command tool specified 2019-11-02 01:11:54.5: Run statistics: 2019-11-02 01:11:54.5: Observations: 4 2019-11-02 01:11:54.5: Considered: 0 2019-11-02 01:11:54.5: Completed: 0 2019-11-02 01:11:54.5: Skipped: 0 2019-11-02 01:11:54.5: Never Eligible: 4 2019-11-02 01:11:54.5: Failed: 0 2019-11-02 01:11:54.5: Shutter-Open efficiency: 26.91% 2019-11-02 01:11:54.5: Overall Efficiency: 31.33% 2019-11-02 01:11:54.5: Release ACP sequencer Log closed at Sat, Nov 02 2019 01:11:56 UTC (actual time)