Log opened at Thu, Oct 31 2019 18:58:35 UTC (actual time) Current log level is Debug ACP Expert Scheduler version 8.2.3 Full license: Arne Henden 2019-11-01 01:10:48.9: ++ Weather Safe ++ 2019-11-01 01:10:50.0: ++ Observatory Startup ++ 2019-11-01 01:10:50.0: Startup attempted, but no StartupObs script found 2019-11-01 01:10:50.0: Observatory startup succeeded 2019-11-01 01:12:21.6: ++ Auto Focus ++ 2019-11-01 01:12:21.6: Doing initial autofocus. 2019-11-01 01:12:21.6: Start special ACP AutoFocus script for scheduler 2019-11-01 01:12:21.6: ACP.RunScript(AutoFocusScheduler, ): 2019-11-01 01:12:21.6: Script ShutdownObs is loaded, and 2019-11-01 01:12:21.6: the console is idle. 2019-11-01 01:12:21.6: In start loop, i = 0 2019-11-01 01:12:21.6: Console is now idle 2019-11-01 01:12:21.9: Loaded C:\Program Files (x86)\ACP Scheduler\AutoFocusScheduler.vbs successfully 2019-11-01 01:12:21.9: Script started successfully 2019-11-01 01:12:31.9: Sequencer is now active 2019-11-01 01:12:37.0: Sequencer is no longer active 2019-11-01 01:12:37.0: ** ACP script "AutoFocusScheduler" failed: 2019-11-01 01:12:37.0: **Script Error** Source: ACP Message: The telescope is not connected. Location: line 42 column 5. 2019-11-01 01:12:37.0: ** Autofocus failed (n=1), will retry ASAP after 0 min. 2019-11-01 01:12:37.0: Plan KH15D has Monitor Mode. Time to resubmit it. 2019-11-01 01:12:37.0: Plan Test has Monitor Mode. Time to resubmit it. 2019-11-01 01:12:37.0: Plan KH15D-B has Monitor Mode. Time to resubmit it. 2019-11-01 01:12:37.0: SelectRunning: No running plans 2019-11-01 01:12:37.0: Obs KH15D in Plan KH15D was vetoed by AirMass constraint. 2019-11-01 01:12:37.0: AirMass estimates ready after 01-Nov-2019 07:05:03 UTC 2019-11-01 01:12:37.0: Obs KH15D-B in Plan KH15D-B was vetoed by AirMass constraint. 2019-11-01 01:12:37.0: AirMass estimates ready after 01-Nov-2019 07:05:03 UTC 2019-11-01 01:12:37.1: Efficiency: Selecting from 2 pending plans: 2019-11-01 01:12:37.1: Selected Plan SA109 (TotEff=0.00) 2019-11-01 01:12:37.2: Dispatcher cycle time: 0.2 sec. 2019-11-01 01:12:37.2: Acquire data for Observation SA109... 2019-11-01 01:12:37.2: (belongs to Project Landolt fields, Plan SA109) 2019-11-01 01:12:37.2: Doing 3 sets 2019-11-01 01:12:37.2: ++ Auto Focus ++ 2019-11-01 01:12:37.2: Doing periodic autofocus. 2019-11-01 01:12:37.2: Start special ACP AutoFocus script for scheduler 2019-11-01 01:12:37.2: ACP.RunScript(AutoFocusScheduler, ): 2019-11-01 01:12:37.2: Script AutoFocusScheduler is loaded, and 2019-11-01 01:12:37.2: the console is idle. 2019-11-01 01:12:37.2: In start loop, i = 0 2019-11-01 01:12:37.2: Console is now idle 2019-11-01 01:12:37.2: Loaded C:\Program Files (x86)\ACP Scheduler\AutoFocusScheduler.vbs successfully 2019-11-01 01:12:37.2: Script started successfully 2019-11-01 01:12:47.2: Sequencer is now active 2019-11-01 01:12:52.3: Sequencer is no longer active 2019-11-01 01:12:52.3: ** ACP script "AutoFocusScheduler" failed: 2019-11-01 01:12:52.3: **Script Error** Source: ACP Message: The telescope is not connected. Location: line 42 column 5. 2019-11-01 01:12:52.3: ** Autofocus failed (n=2), will retry ASAP after 5 min. 2019-11-01 01:12:52.4: **EXCEPTION IN SCHEDULER: 2019-11-01 01:12:52.4: The telescope is not connected. 2019-11-01 01:12:52.6: Traceback: at ACP.TelescopeClass.get_SlewSettleTime() at DC3.Scheduler.ACPSequencer.AcquireData(Observation Obs) at DC3.Scheduler.Engine.DoSchedulePass() at DC3.Scheduler.Engine.Run() 2019-11-01 01:12:52.7: No operator intervention command tool specified 2019-11-01 01:12:52.7: Run statistics: 2019-11-01 01:12:52.7: Observations: 4 2019-11-01 01:12:52.7: Considered: 0 2019-11-01 01:12:52.7: Completed: 0 2019-11-01 01:12:52.7: Skipped: 0 2019-11-01 01:12:52.7: Never Eligible: 4 2019-11-01 01:12:52.7: Failed: 0 2019-11-01 01:12:52.7: Shutter-Open efficiency: 35.73% 2019-11-01 01:12:52.7: Overall Efficiency: 41.50% 2019-11-01 01:12:52.7: Release ACP sequencer Log closed at Fri, Nov 01 2019 01:12:54 UTC (actual time)