Log opened at Wed, Oct 30 2019 18:58:48 UTC (actual time) Current log level is Debug ACP Expert Scheduler version 8.2.3 Full license: Arne Henden 2019-10-31 01:08:45.8: ++ Weather Safe ++ 2019-10-31 01:08:46.8: ++ Observatory Startup ++ 2019-10-31 01:08:46.8: Startup attempted, but no StartupObs script found 2019-10-31 01:08:46.9: Observatory startup succeeded 2019-10-31 01:12:51.3: ++ Auto Focus ++ 2019-10-31 01:12:51.4: Doing initial autofocus. 2019-10-31 01:12:51.4: Start special ACP AutoFocus script for scheduler 2019-10-31 01:12:51.4: ACP.RunScript(AutoFocusScheduler, ): 2019-10-31 01:12:51.4: Script ShutdownObs is loaded, and 2019-10-31 01:12:51.4: the console is idle. 2019-10-31 01:12:51.4: In start loop, i = 0 2019-10-31 01:12:51.4: Console is now idle 2019-10-31 01:12:51.4: Loaded C:\Program Files (x86)\ACP Scheduler\AutoFocusScheduler.vbs successfully 2019-10-31 01:12:51.4: Script started successfully 2019-10-31 01:13:01.4: Sequencer is now active 2019-10-31 01:13:06.5: Sequencer is no longer active 2019-10-31 01:13:06.5: ** ACP script "AutoFocusScheduler" failed: 2019-10-31 01:13:06.5: **Script Error** Source: ACP Message: The telescope is not connected. Location: line 42 column 5. 2019-10-31 01:13:06.5: ** Autofocus failed (n=1), will retry ASAP after 0 min. 2019-10-31 01:13:06.5: Plan KH15D has Monitor Mode. Time to resubmit it. 2019-10-31 01:13:06.5: Plan Test has Monitor Mode. Time to resubmit it. 2019-10-31 01:13:06.5: Plan KH15D-B has Monitor Mode. Time to resubmit it. 2019-10-31 01:13:06.5: SelectRunning: No running plans 2019-10-31 01:13:06.5: Obs KH15D in Plan KH15D was vetoed by AirMass constraint. 2019-10-31 01:13:06.5: AirMass estimates ready after 31-Oct-2019 07:08:59 UTC 2019-10-31 01:13:06.5: Obs KH15D-B in Plan KH15D-B was vetoed by AirMass constraint. 2019-10-31 01:13:06.5: AirMass estimates ready after 31-Oct-2019 07:08:59 UTC 2019-10-31 01:13:06.5: Efficiency: Selecting from 2 pending plans: 2019-10-31 01:13:06.6: Selected Plan SA109 (TotEff=0.00) 2019-10-31 01:13:06.6: Dispatcher cycle time: 0.2 sec. 2019-10-31 01:13:06.6: Acquire data for Observation SA109... 2019-10-31 01:13:06.7: (belongs to Project Landolt fields, Plan SA109) 2019-10-31 01:13:06.7: Doing 3 sets 2019-10-31 01:13:06.7: ++ Auto Focus ++ 2019-10-31 01:13:06.7: Doing periodic autofocus. 2019-10-31 01:13:06.7: Start special ACP AutoFocus script for scheduler 2019-10-31 01:13:06.7: ACP.RunScript(AutoFocusScheduler, ): 2019-10-31 01:13:06.7: Script AutoFocusScheduler is loaded, and 2019-10-31 01:13:06.7: the console is idle. 2019-10-31 01:13:06.7: In start loop, i = 0 2019-10-31 01:13:06.7: Console is now idle 2019-10-31 01:13:06.7: Loaded C:\Program Files (x86)\ACP Scheduler\AutoFocusScheduler.vbs successfully 2019-10-31 01:13:06.7: Script started successfully 2019-10-31 01:13:16.7: Sequencer is now active 2019-10-31 01:13:21.8: Sequencer is no longer active 2019-10-31 01:13:21.8: ** ACP script "AutoFocusScheduler" failed: 2019-10-31 01:13:21.8: **Script Error** Source: ACP Message: The telescope is not connected. Location: line 42 column 5. 2019-10-31 01:13:21.8: ** Autofocus failed (n=2), will retry ASAP after 5 min. 2019-10-31 01:13:21.9: **EXCEPTION IN SCHEDULER: 2019-10-31 01:13:21.9: The telescope is not connected. 2019-10-31 01:13:22.3: Traceback: at ACP.TelescopeClass.get_SlewSettleTime() at DC3.Scheduler.ACPSequencer.AcquireData(Observation Obs) at DC3.Scheduler.Engine.DoSchedulePass() at DC3.Scheduler.Engine.Run() 2019-10-31 01:13:22.3: No operator intervention command tool specified 2019-10-31 01:13:22.3: Run statistics: 2019-10-31 01:13:22.3: Observations: 4 2019-10-31 01:13:22.3: Considered: 0 2019-10-31 01:13:22.3: Completed: 0 2019-10-31 01:13:22.3: Skipped: 0 2019-10-31 01:13:22.3: Never Eligible: 4 2019-10-31 01:13:22.3: Failed: 0 2019-10-31 01:13:22.3: Shutter-Open efficiency: 27.19% 2019-10-31 01:13:22.3: Overall Efficiency: 31.55% 2019-10-31 01:13:22.3: Release ACP sequencer Log closed at Thu, Oct 31 2019 01:13:24 UTC (actual time)