Log opened at Tue, Oct 29 2019 18:58:42 UTC (actual time) Current log level is Debug ACP Expert Scheduler version 8.2.3 Full license: Arne Henden 2019-10-30 01:03:35.6: ++ Weather Safe ++ 2019-10-30 01:03:36.6: ++ Observatory Startup ++ 2019-10-30 01:03:36.6: Startup attempted, but no StartupObs script found 2019-10-30 01:03:36.6: Observatory startup succeeded 2019-10-30 01:13:48.1: ++ Auto Focus ++ 2019-10-30 01:13:48.1: Doing initial autofocus. 2019-10-30 01:13:48.1: Start special ACP AutoFocus script for scheduler 2019-10-30 01:13:48.1: ACP.RunScript(AutoFocusScheduler, ): 2019-10-30 01:13:48.1: Script ShutdownObs is loaded, and 2019-10-30 01:13:48.1: the console is idle. 2019-10-30 01:13:48.1: In start loop, i = 0 2019-10-30 01:13:48.1: Console is now idle 2019-10-30 01:13:48.1: Loaded C:\Program Files (x86)\ACP Scheduler\AutoFocusScheduler.vbs successfully 2019-10-30 01:13:48.1: Script started successfully 2019-10-30 01:13:58.1: Sequencer is now active 2019-10-30 01:14:03.2: Sequencer is no longer active 2019-10-30 01:14:03.2: ** ACP script "AutoFocusScheduler" failed: 2019-10-30 01:14:03.2: **Script Error** Source: ACP Message: The telescope is not connected. Location: line 42 column 5. 2019-10-30 01:14:03.2: ** Autofocus failed (n=1), will retry ASAP after 0 min. 2019-10-30 01:14:03.2: Plan KH15D has Monitor Mode. Time to resubmit it. 2019-10-30 01:14:03.2: Plan Test has Monitor Mode. Time to resubmit it. 2019-10-30 01:14:03.2: Plan KH15D-B has Monitor Mode. Time to resubmit it. 2019-10-30 01:14:03.2: SelectRunning: No running plans 2019-10-30 01:14:03.2: Obs KH15D in Plan KH15D was vetoed by AirMass constraint. 2019-10-30 01:14:03.2: AirMass estimates ready after 30-Oct-2019 07:12:55 UTC 2019-10-30 01:14:03.2: Obs KH15D-B in Plan KH15D-B was vetoed by AirMass constraint. 2019-10-30 01:14:03.2: AirMass estimates ready after 30-Oct-2019 07:12:55 UTC 2019-10-30 01:14:03.3: Efficiency: Selecting from 2 pending plans: 2019-10-30 01:14:03.3: Selected Plan SA109 (TotEff=0.00) 2019-10-30 01:14:03.4: Dispatcher cycle time: 0.2 sec. 2019-10-30 01:14:03.4: Acquire data for Observation SA109... 2019-10-30 01:14:03.4: (belongs to Project Landolt fields, Plan SA109) 2019-10-30 01:14:03.4: Doing 3 sets 2019-10-30 01:14:03.4: ++ Auto Focus ++ 2019-10-30 01:14:03.4: Doing periodic autofocus. 2019-10-30 01:14:03.4: Start special ACP AutoFocus script for scheduler 2019-10-30 01:14:03.4: ACP.RunScript(AutoFocusScheduler, ): 2019-10-30 01:14:03.4: Script AutoFocusScheduler is loaded, and 2019-10-30 01:14:03.4: the console is idle. 2019-10-30 01:14:03.4: In start loop, i = 0 2019-10-30 01:14:03.4: Console is now idle 2019-10-30 01:14:03.4: Loaded C:\Program Files (x86)\ACP Scheduler\AutoFocusScheduler.vbs successfully 2019-10-30 01:14:03.4: Script started successfully 2019-10-30 01:14:13.4: Sequencer is now active 2019-10-30 01:14:18.5: Sequencer is no longer active 2019-10-30 01:14:18.5: ** ACP script "AutoFocusScheduler" failed: 2019-10-30 01:14:18.5: **Script Error** Source: ACP Message: The telescope is not connected. Location: line 42 column 5. 2019-10-30 01:14:18.5: ** Autofocus failed (n=2), will retry ASAP after 5 min. 2019-10-30 01:14:18.6: **EXCEPTION IN SCHEDULER: 2019-10-30 01:14:18.6: The telescope is not connected. 2019-10-30 01:14:19.3: Traceback: at ACP.TelescopeClass.get_SlewSettleTime() at DC3.Scheduler.ACPSequencer.AcquireData(Observation Obs) at DC3.Scheduler.Engine.DoSchedulePass() at DC3.Scheduler.Engine.Run() 2019-10-30 01:14:19.4: No operator intervention command tool specified 2019-10-30 01:14:19.4: Run statistics: 2019-10-30 01:14:19.4: Observations: 4 2019-10-30 01:14:19.4: Considered: 0 2019-10-30 01:14:19.4: Completed: 0 2019-10-30 01:14:19.4: Skipped: 0 2019-10-30 01:14:19.4: Never Eligible: 4 2019-10-30 01:14:19.4: Failed: 0 2019-10-30 01:14:19.4: Shutter-Open efficiency: 25.16% 2019-10-30 01:14:19.4: Overall Efficiency: 29.30% 2019-10-30 01:14:19.4: Release ACP sequencer Log closed at Wed, Oct 30 2019 01:14:21 UTC (actual time)