Log opened at Sat, Oct 26 2019 18:59:28 UTC (actual time) Current log level is Debug ACP Expert Scheduler version 8.2.3 Full license: Arne Henden 2019-10-27 01:10:36.3: ++ Weather Safe ++ 2019-10-27 01:10:37.3: ++ Observatory Startup ++ 2019-10-27 01:10:37.3: Startup attempted, but no StartupObs script found 2019-10-27 01:10:37.3: Observatory startup succeeded 2019-10-27 01:16:44.2: ++ Auto Focus ++ 2019-10-27 01:16:44.2: Doing initial autofocus. 2019-10-27 01:16:44.2: Start special ACP AutoFocus script for scheduler 2019-10-27 01:16:44.2: ACP.RunScript(AutoFocusScheduler, ): 2019-10-27 01:16:44.2: Script ShutdownObs is loaded, and 2019-10-27 01:16:44.2: the console is idle. 2019-10-27 01:16:44.2: In start loop, i = 0 2019-10-27 01:16:44.2: Console is now idle 2019-10-27 01:16:44.4: Loaded C:\Program Files (x86)\ACP Scheduler\AutoFocusScheduler.vbs successfully 2019-10-27 01:16:44.4: Script started successfully 2019-10-27 01:16:54.4: Sequencer is now active 2019-10-27 01:16:59.5: Sequencer is no longer active 2019-10-27 01:16:59.5: ** ACP script "AutoFocusScheduler" failed: 2019-10-27 01:16:59.5: **Script Error** Source: ACP Message: The telescope is not connected. Location: line 42 column 5. 2019-10-27 01:16:59.5: ** Autofocus failed (n=1), will retry ASAP after 0 min. 2019-10-27 01:16:59.5: Plan KH15D has Monitor Mode. Time to resubmit it. 2019-10-27 01:16:59.5: Plan Test has Monitor Mode. Time to resubmit it. 2019-10-27 01:16:59.5: Plan KH15D-B has Monitor Mode. Time to resubmit it. 2019-10-27 01:16:59.5: SelectRunning: No running plans 2019-10-27 01:16:59.5: Obs KH15D in Plan KH15D was vetoed by AirMass constraint. 2019-10-27 01:16:59.5: AirMass estimates ready after 27-Oct-2019 07:24:43 UTC 2019-10-27 01:16:59.5: Obs KH15D-B in Plan KH15D-B was vetoed by AirMass constraint. 2019-10-27 01:16:59.5: AirMass estimates ready after 27-Oct-2019 07:24:43 UTC 2019-10-27 01:16:59.6: Efficiency: Selecting from 2 pending plans: 2019-10-27 01:16:59.6: Selected Plan SA109 (TotEff=0.00) 2019-10-27 01:16:59.7: Dispatcher cycle time: 0.2 sec. 2019-10-27 01:16:59.7: Acquire data for Observation SA109... 2019-10-27 01:16:59.7: (belongs to Project Landolt fields, Plan SA109) 2019-10-27 01:16:59.7: Doing 3 sets 2019-10-27 01:16:59.7: ++ Auto Focus ++ 2019-10-27 01:16:59.7: Doing periodic autofocus. 2019-10-27 01:16:59.7: Start special ACP AutoFocus script for scheduler 2019-10-27 01:16:59.7: ACP.RunScript(AutoFocusScheduler, ): 2019-10-27 01:16:59.7: Script AutoFocusScheduler is loaded, and 2019-10-27 01:16:59.7: the console is idle. 2019-10-27 01:16:59.7: In start loop, i = 0 2019-10-27 01:16:59.7: Console is now idle 2019-10-27 01:16:59.8: Loaded C:\Program Files (x86)\ACP Scheduler\AutoFocusScheduler.vbs successfully 2019-10-27 01:16:59.8: Script started successfully 2019-10-27 01:17:09.8: Sequencer is now active 2019-10-27 01:17:14.8: Sequencer is no longer active 2019-10-27 01:17:14.8: ** ACP script "AutoFocusScheduler" failed: 2019-10-27 01:17:14.8: **Script Error** Source: ACP Message: The telescope is not connected. Location: line 42 column 5. 2019-10-27 01:17:14.8: ** Autofocus failed (n=2), will retry ASAP after 5 min. 2019-10-27 01:17:14.9: **EXCEPTION IN SCHEDULER: 2019-10-27 01:17:14.9: The telescope is not connected. 2019-10-27 01:17:15.3: Traceback: at ACP.TelescopeClass.get_SlewSettleTime() at DC3.Scheduler.ACPSequencer.AcquireData(Observation Obs) at DC3.Scheduler.Engine.DoSchedulePass() at DC3.Scheduler.Engine.Run() 2019-10-27 01:17:15.4: No operator intervention command tool specified 2019-10-27 01:17:15.5: Run statistics: 2019-10-27 01:17:15.5: Observations: 4 2019-10-27 01:17:15.5: Considered: 0 2019-10-27 01:17:15.5: Completed: 0 2019-10-27 01:17:15.5: Skipped: 0 2019-10-27 01:17:15.5: Never Eligible: 4 2019-10-27 01:17:15.5: Failed: 0 2019-10-27 01:17:15.5: Shutter-Open efficiency: 38.19% 2019-10-27 01:17:15.5: Overall Efficiency: 44.13% 2019-10-27 01:17:15.5: Release ACP sequencer Log closed at Sun, Oct 27 2019 01:17:17 UTC (actual time)