Log opened at Wed, Oct 23 2019 18:59:12 UTC (actual time) Current log level is Debug ACP Expert Scheduler version 8.2.3 Full license: Arne Henden 2019-10-24 01:11:13.7: ++ Weather Safe ++ 2019-10-24 01:11:14.7: ++ Observatory Startup ++ 2019-10-24 01:11:14.7: Startup attempted, but no StartupObs script found 2019-10-24 01:11:14.7: Observatory startup succeeded 2019-10-24 01:19:23.8: ++ Auto Focus ++ 2019-10-24 01:19:23.9: Doing initial autofocus. 2019-10-24 01:19:23.9: Start special ACP AutoFocus script for scheduler 2019-10-24 01:19:23.9: ACP.RunScript(AutoFocusScheduler, ): 2019-10-24 01:19:23.9: Script ShutdownObs is loaded, and 2019-10-24 01:19:23.9: the console is idle. 2019-10-24 01:19:23.9: In start loop, i = 0 2019-10-24 01:19:23.9: Console is now idle 2019-10-24 01:19:24.0: Loaded C:\Program Files (x86)\ACP Scheduler\AutoFocusScheduler.vbs successfully 2019-10-24 01:19:24.0: Script started successfully 2019-10-24 01:19:34.0: Sequencer is now active 2019-10-24 01:19:39.1: Sequencer is no longer active 2019-10-24 01:19:39.1: ** ACP script "AutoFocusScheduler" failed: 2019-10-24 01:19:39.1: **Script Error** Source: ACP Message: The telescope is not connected. Location: line 42 column 5. 2019-10-24 01:19:39.1: ** Autofocus failed (n=1), will retry ASAP after 0 min. 2019-10-24 01:19:39.1: Plan KH15D has Monitor Mode. Time to resubmit it. 2019-10-24 01:19:39.1: Plan Test has Monitor Mode. Time to resubmit it. 2019-10-24 01:19:39.1: Plan KH15D-B has Monitor Mode. Time to resubmit it. 2019-10-24 01:19:39.1: SelectRunning: No running plans 2019-10-24 01:19:39.1: Obs KH15D in Plan KH15D was vetoed by AirMass constraint. 2019-10-24 01:19:39.1: AirMass estimates ready after 24-Oct-2019 07:36:30 UTC 2019-10-24 01:19:39.1: Obs KH15D-B in Plan KH15D-B was vetoed by AirMass constraint. 2019-10-24 01:19:39.1: AirMass estimates ready after 24-Oct-2019 07:36:30 UTC 2019-10-24 01:19:39.2: Efficiency: Selecting from 2 pending plans: 2019-10-24 01:19:39.2: Selected Plan SA109 (TotEff=0.00) 2019-10-24 01:19:39.3: Dispatcher cycle time: 0.2 sec. 2019-10-24 01:19:39.3: Acquire data for Observation SA109... 2019-10-24 01:19:39.3: (belongs to Project Landolt fields, Plan SA109) 2019-10-24 01:19:39.3: Doing 3 sets 2019-10-24 01:19:39.3: ++ Auto Focus ++ 2019-10-24 01:19:39.3: Doing periodic autofocus. 2019-10-24 01:19:39.3: Start special ACP AutoFocus script for scheduler 2019-10-24 01:19:39.3: ACP.RunScript(AutoFocusScheduler, ): 2019-10-24 01:19:39.3: Script AutoFocusScheduler is loaded, and 2019-10-24 01:19:39.3: the console is idle. 2019-10-24 01:19:39.3: In start loop, i = 0 2019-10-24 01:19:39.3: Console is now idle 2019-10-24 01:19:39.3: Loaded C:\Program Files (x86)\ACP Scheduler\AutoFocusScheduler.vbs successfully 2019-10-24 01:19:39.3: Script started successfully 2019-10-24 01:19:49.3: Sequencer is now active 2019-10-24 01:19:54.4: Sequencer is no longer active 2019-10-24 01:19:54.4: ** ACP script "AutoFocusScheduler" failed: 2019-10-24 01:19:54.4: **Script Error** Source: ACP Message: The telescope is not connected. Location: line 42 column 5. 2019-10-24 01:19:54.4: ** Autofocus failed (n=2), will retry ASAP after 5 min. 2019-10-24 01:19:54.4: **EXCEPTION IN SCHEDULER: 2019-10-24 01:19:54.4: The telescope is not connected. 2019-10-24 01:19:54.8: Traceback: at ACP.TelescopeClass.get_SlewSettleTime() at DC3.Scheduler.ACPSequencer.AcquireData(Observation Obs) at DC3.Scheduler.Engine.DoSchedulePass() at DC3.Scheduler.Engine.Run() 2019-10-24 01:19:54.9: No operator intervention command tool specified 2019-10-24 01:19:54.9: Run statistics: 2019-10-24 01:19:54.9: Observations: 4 2019-10-24 01:19:54.9: Considered: 0 2019-10-24 01:19:54.9: Completed: 0 2019-10-24 01:19:54.9: Skipped: 0 2019-10-24 01:19:54.9: Never Eligible: 4 2019-10-24 01:19:54.9: Failed: 0 2019-10-24 01:19:54.9: Shutter-Open efficiency: 21.06% 2019-10-24 01:19:54.9: Overall Efficiency: 25.13% 2019-10-24 01:19:54.9: Release ACP sequencer Log closed at Thu, Oct 24 2019 01:19:56 UTC (actual time)