Log opened at Tue, Oct 22 2019 18:59:17 UTC (actual time) Current log level is Debug ACP Expert Scheduler version 8.2.3 Full license: Arne Henden 2019-10-23 01:13:51.4: ++ Weather Safe ++ 2019-10-23 01:13:52.4: ++ Observatory Startup ++ 2019-10-23 01:13:52.4: Startup attempted, but no StartupObs script found 2019-10-23 01:13:52.4: Observatory startup succeeded 2019-10-23 01:20:29.8: ++ Auto Focus ++ 2019-10-23 01:20:29.8: Doing initial autofocus. 2019-10-23 01:20:29.8: Start special ACP AutoFocus script for scheduler 2019-10-23 01:20:29.8: ACP.RunScript(AutoFocusScheduler, ): 2019-10-23 01:20:29.8: Script ShutdownObs is loaded, and 2019-10-23 01:20:29.8: the console is idle. 2019-10-23 01:20:29.8: In start loop, i = 0 2019-10-23 01:20:29.8: Console is now idle 2019-10-23 01:20:29.9: Loaded C:\Program Files (x86)\ACP Scheduler\AutoFocusScheduler.vbs successfully 2019-10-23 01:20:29.9: Script started successfully 2019-10-23 01:20:39.9: Sequencer is now active 2019-10-23 01:20:45.0: Sequencer is no longer active 2019-10-23 01:20:45.0: ** ACP script "AutoFocusScheduler" failed: 2019-10-23 01:20:45.0: **Script Error** Source: ACP Message: The telescope is not connected. Location: line 42 column 5. 2019-10-23 01:20:45.0: ** Autofocus failed (n=1), will retry ASAP after 0 min. 2019-10-23 01:20:45.0: Plan KH15D has Monitor Mode. Time to resubmit it. 2019-10-23 01:20:45.0: Plan Test has Monitor Mode. Time to resubmit it. 2019-10-23 01:20:45.0: Plan KH15D-B has Monitor Mode. Time to resubmit it. 2019-10-23 01:20:45.0: SelectRunning: No running plans 2019-10-23 01:20:45.0: Obs KH15D in Plan KH15D was vetoed by AirMass constraint. 2019-10-23 01:20:45.0: AirMass estimates ready after 23-Oct-2019 07:40:26 UTC 2019-10-23 01:20:45.0: Obs KH15D-B in Plan KH15D-B was vetoed by AirMass constraint. 2019-10-23 01:20:45.0: AirMass estimates ready after 23-Oct-2019 07:40:26 UTC 2019-10-23 01:20:45.0: Efficiency: Selecting from 2 pending plans: 2019-10-23 01:20:45.1: Selected Plan SA109 (TotEff=0.00) 2019-10-23 01:20:45.1: Dispatcher cycle time: 0.2 sec. 2019-10-23 01:20:45.1: Acquire data for Observation SA109... 2019-10-23 01:20:45.1: (belongs to Project Landolt fields, Plan SA109) 2019-10-23 01:20:45.1: Doing 3 sets 2019-10-23 01:20:45.1: ++ Auto Focus ++ 2019-10-23 01:20:45.2: Doing periodic autofocus. 2019-10-23 01:20:45.2: Start special ACP AutoFocus script for scheduler 2019-10-23 01:20:45.2: ACP.RunScript(AutoFocusScheduler, ): 2019-10-23 01:20:45.2: Script AutoFocusScheduler is loaded, and 2019-10-23 01:20:45.2: the console is idle. 2019-10-23 01:20:45.2: In start loop, i = 0 2019-10-23 01:20:45.2: Console is now idle 2019-10-23 01:20:45.2: Loaded C:\Program Files (x86)\ACP Scheduler\AutoFocusScheduler.vbs successfully 2019-10-23 01:20:45.2: Script started successfully 2019-10-23 01:20:55.2: Sequencer is now active 2019-10-23 01:21:00.3: Sequencer is no longer active 2019-10-23 01:21:00.3: ** ACP script "AutoFocusScheduler" failed: 2019-10-23 01:21:00.3: **Script Error** Source: ACP Message: The telescope is not connected. Location: line 42 column 5. 2019-10-23 01:21:00.3: ** Autofocus failed (n=2), will retry ASAP after 5 min. 2019-10-23 01:21:00.3: **EXCEPTION IN SCHEDULER: 2019-10-23 01:21:00.3: The telescope is not connected. 2019-10-23 01:21:00.7: Traceback: at ACP.TelescopeClass.get_SlewSettleTime() at DC3.Scheduler.ACPSequencer.AcquireData(Observation Obs) at DC3.Scheduler.Engine.DoSchedulePass() at DC3.Scheduler.Engine.Run() 2019-10-23 01:21:00.7: No operator intervention command tool specified 2019-10-23 01:21:00.8: Run statistics: 2019-10-23 01:21:00.8: Observations: 4 2019-10-23 01:21:00.8: Considered: 0 2019-10-23 01:21:00.8: Completed: 0 2019-10-23 01:21:00.8: Skipped: 0 2019-10-23 01:21:00.8: Never Eligible: 4 2019-10-23 01:21:00.8: Failed: 0 2019-10-23 01:21:00.8: Shutter-Open efficiency: 21.28% 2019-10-23 01:21:00.8: Overall Efficiency: 25.40% 2019-10-23 01:21:00.8: Release ACP sequencer Log closed at Wed, Oct 23 2019 01:21:02 UTC (actual time)