Log opened at Sun, Oct 20 2019 19:00:03 UTC (actual time) Current log level is Debug ACP Expert Scheduler version 8.2.3 Full license: Arne Henden 2019-10-21 01:27:52.7: ++ Weather Safe ++ 2019-10-21 01:27:53.8: ++ Observatory Startup ++ 2019-10-21 01:27:53.8: Startup attempted, but no StartupObs script found 2019-10-21 01:27:53.8: Observatory startup succeeded 2019-10-21 01:27:53.8: ++ Auto Focus ++ 2019-10-21 01:27:53.8: Doing initial autofocus. 2019-10-21 01:27:53.8: Start special ACP AutoFocus script for scheduler 2019-10-21 01:27:53.8: ACP.RunScript(AutoFocusScheduler, ): 2019-10-21 01:27:53.8: Script ShutdownObs is loaded, and 2019-10-21 01:27:53.8: the console is idle. 2019-10-21 01:27:53.8: In start loop, i = 0 2019-10-21 01:27:53.8: Console is now idle 2019-10-21 01:27:53.8: Loaded C:\Program Files (x86)\ACP Scheduler\AutoFocusScheduler.vbs successfully 2019-10-21 01:27:53.8: Script started successfully 2019-10-21 01:28:03.8: Sequencer is now active 2019-10-21 01:28:08.9: Sequencer is no longer active 2019-10-21 01:28:08.9: ** ACP script "AutoFocusScheduler" failed: 2019-10-21 01:28:08.9: **Script Error** Source: ACP Message: The telescope is not connected. Location: line 42 column 5. 2019-10-21 01:28:08.9: ** Autofocus failed (n=1), will retry ASAP after 0 min. 2019-10-21 01:28:08.9: Plan KH15D has Monitor Mode. Time to resubmit it. 2019-10-21 01:28:08.9: Plan Test has Monitor Mode. Time to resubmit it. 2019-10-21 01:28:08.9: Plan KH15D-B has Monitor Mode. Time to resubmit it. 2019-10-21 01:28:08.9: SelectRunning: No running plans 2019-10-21 01:28:08.9: Obs KH15D in Plan KH15D was vetoed by AirMass constraint. 2019-10-21 01:28:08.9: AirMass estimates ready after 21-Oct-2019 07:48:18 UTC 2019-10-21 01:28:08.9: Obs KH15D-B in Plan KH15D-B was vetoed by AirMass constraint. 2019-10-21 01:28:08.9: AirMass estimates ready after 21-Oct-2019 07:48:18 UTC 2019-10-21 01:28:08.9: Efficiency: Selecting from 2 pending plans: 2019-10-21 01:28:09.0: Selected Plan SA109 (TotEff=0.00) 2019-10-21 01:28:09.0: Dispatcher cycle time: 0.1 sec. 2019-10-21 01:28:09.0: Acquire data for Observation SA109... 2019-10-21 01:28:09.0: (belongs to Project Landolt fields, Plan SA109) 2019-10-21 01:28:09.0: Doing 3 sets 2019-10-21 01:28:09.0: ++ Auto Focus ++ 2019-10-21 01:28:09.1: Doing periodic autofocus. 2019-10-21 01:28:09.1: Start special ACP AutoFocus script for scheduler 2019-10-21 01:28:09.1: ACP.RunScript(AutoFocusScheduler, ): 2019-10-21 01:28:09.1: Script AutoFocusScheduler is loaded, and 2019-10-21 01:28:09.1: the console is idle. 2019-10-21 01:28:09.1: In start loop, i = 0 2019-10-21 01:28:09.1: Console is now idle 2019-10-21 01:28:09.1: Loaded C:\Program Files (x86)\ACP Scheduler\AutoFocusScheduler.vbs successfully 2019-10-21 01:28:09.1: Script started successfully 2019-10-21 01:28:19.1: Sequencer is now active 2019-10-21 01:28:24.2: Sequencer is no longer active 2019-10-21 01:28:24.2: ** ACP script "AutoFocusScheduler" failed: 2019-10-21 01:28:24.2: **Script Error** Source: ACP Message: The telescope is not connected. Location: line 42 column 5. 2019-10-21 01:28:24.2: ** Autofocus failed (n=2), will retry ASAP after 5 min. 2019-10-21 01:28:24.2: **EXCEPTION IN SCHEDULER: 2019-10-21 01:28:24.2: The telescope is not connected. 2019-10-21 01:28:24.4: Traceback: at ACP.TelescopeClass.get_SlewSettleTime() at DC3.Scheduler.ACPSequencer.AcquireData(Observation Obs) at DC3.Scheduler.Engine.DoSchedulePass() at DC3.Scheduler.Engine.Run() 2019-10-21 01:28:24.4: No operator intervention command tool specified 2019-10-21 01:28:24.5: Run statistics: 2019-10-21 01:28:24.5: Observations: 4 2019-10-21 01:28:24.5: Considered: 0 2019-10-21 01:28:24.5: Completed: 0 2019-10-21 01:28:24.5: Skipped: 0 2019-10-21 01:28:24.5: Never Eligible: 4 2019-10-21 01:28:24.5: Failed: 0 2019-10-21 01:28:24.5: Shutter-Open efficiency: 30.46% 2019-10-21 01:28:24.5: Overall Efficiency: 36.09% 2019-10-21 01:28:24.5: Release ACP sequencer Log closed at Mon, Oct 21 2019 01:28:26 UTC (actual time)