Log opened at Sat, Oct 19 2019 19:00:23 UTC (actual time) Current log level is Debug ACP Expert Scheduler version 8.2.3 Full license: Arne Henden 2019-10-20 01:15:35.1: ++ Weather Safe ++ 2019-10-20 01:15:36.1: ++ Observatory Startup ++ 2019-10-20 01:15:36.1: Startup attempted, but no StartupObs script found 2019-10-20 01:15:36.1: Observatory startup succeeded 2019-10-20 01:23:45.3: ++ Auto Focus ++ 2019-10-20 01:23:45.3: Doing initial autofocus. 2019-10-20 01:23:45.3: Start special ACP AutoFocus script for scheduler 2019-10-20 01:23:45.3: ACP.RunScript(AutoFocusScheduler, ): 2019-10-20 01:23:45.3: Script ShutdownObs is loaded, and 2019-10-20 01:23:45.3: the console is idle. 2019-10-20 01:23:45.3: In start loop, i = 0 2019-10-20 01:23:45.3: Console is now idle 2019-10-20 01:23:45.3: Loaded C:\Program Files (x86)\ACP Scheduler\AutoFocusScheduler.vbs successfully 2019-10-20 01:23:45.3: Script started successfully 2019-10-20 01:23:55.3: Sequencer is now active 2019-10-20 01:24:00.4: Sequencer is no longer active 2019-10-20 01:24:00.4: ** ACP script "AutoFocusScheduler" failed: 2019-10-20 01:24:00.4: **Script Error** Source: ACP Message: The telescope is not connected. Location: line 42 column 5. 2019-10-20 01:24:00.4: ** Autofocus failed (n=1), will retry ASAP after 0 min. 2019-10-20 01:24:00.4: Plan KH15D has Monitor Mode. Time to resubmit it. 2019-10-20 01:24:00.4: Plan Test has Monitor Mode. Time to resubmit it. 2019-10-20 01:24:00.4: Plan KH15D-B has Monitor Mode. Time to resubmit it. 2019-10-20 01:24:00.4: SelectRunning: No running plans 2019-10-20 01:24:00.4: Obs KH15D in Plan KH15D was vetoed by AirMass constraint. 2019-10-20 01:24:00.4: AirMass estimates ready after 20-Oct-2019 07:52:14 UTC 2019-10-20 01:24:00.4: Obs KH15D-B in Plan KH15D-B was vetoed by AirMass constraint. 2019-10-20 01:24:00.4: AirMass estimates ready after 20-Oct-2019 07:52:14 UTC 2019-10-20 01:24:00.4: Efficiency: Selecting from 2 pending plans: 2019-10-20 01:24:00.5: Selected Plan SA109 (TotEff=0.00) 2019-10-20 01:24:00.5: Dispatcher cycle time: 0.2 sec. 2019-10-20 01:24:00.5: Acquire data for Observation SA109... 2019-10-20 01:24:00.5: (belongs to Project Landolt fields, Plan SA109) 2019-10-20 01:24:00.5: Doing 3 sets 2019-10-20 01:24:00.6: ++ Auto Focus ++ 2019-10-20 01:24:00.6: Doing periodic autofocus. 2019-10-20 01:24:00.6: Start special ACP AutoFocus script for scheduler 2019-10-20 01:24:00.6: ACP.RunScript(AutoFocusScheduler, ): 2019-10-20 01:24:00.6: Script AutoFocusScheduler is loaded, and 2019-10-20 01:24:00.6: the console is idle. 2019-10-20 01:24:00.6: In start loop, i = 0 2019-10-20 01:24:00.6: Console is now idle 2019-10-20 01:24:00.6: Loaded C:\Program Files (x86)\ACP Scheduler\AutoFocusScheduler.vbs successfully 2019-10-20 01:24:00.6: Script started successfully 2019-10-20 01:24:10.6: Sequencer is now active 2019-10-20 01:24:15.7: Sequencer is no longer active 2019-10-20 01:24:15.7: ** ACP script "AutoFocusScheduler" failed: 2019-10-20 01:24:15.7: **Script Error** Source: ACP Message: The telescope is not connected. Location: line 42 column 5. 2019-10-20 01:24:15.7: ** Autofocus failed (n=2), will retry ASAP after 5 min. 2019-10-20 01:24:15.7: **EXCEPTION IN SCHEDULER: 2019-10-20 01:24:15.7: The telescope is not connected. 2019-10-20 01:24:15.8: Traceback: at ACP.TelescopeClass.get_SlewSettleTime() at DC3.Scheduler.ACPSequencer.AcquireData(Observation Obs) at DC3.Scheduler.Engine.DoSchedulePass() at DC3.Scheduler.Engine.Run() 2019-10-20 01:24:15.8: No operator intervention command tool specified 2019-10-20 01:24:15.9: Run statistics: 2019-10-20 01:24:15.9: Observations: 4 2019-10-20 01:24:15.9: Considered: 0 2019-10-20 01:24:15.9: Completed: 0 2019-10-20 01:24:15.9: Skipped: 0 2019-10-20 01:24:15.9: Never Eligible: 4 2019-10-20 01:24:15.9: Failed: 0 2019-10-20 01:24:15.9: Shutter-Open efficiency: 14.25% 2019-10-20 01:24:15.9: Overall Efficiency: 22.87% 2019-10-20 01:24:15.9: Release ACP sequencer Log closed at Sun, Oct 20 2019 01:24:17 UTC (actual time)