Log opened at Thu, Oct 17 2019 19:00:26 UTC (actual time) Current log level is Debug ACP Expert Scheduler version 8.2.3 Full license: Arne Henden 2019-10-18 01:17:34.0: ++ Weather Safe ++ 2019-10-18 01:17:35.0: ++ Observatory Startup ++ 2019-10-18 01:17:35.0: Startup attempted, but no StartupObs script found 2019-10-18 01:17:35.0: Observatory startup succeeded 2019-10-18 01:25:44.2: ++ Auto Focus ++ 2019-10-18 01:25:44.2: Doing initial autofocus. 2019-10-18 01:25:44.2: Start special ACP AutoFocus script for scheduler 2019-10-18 01:25:44.2: ACP.RunScript(AutoFocusScheduler, ): 2019-10-18 01:25:44.2: Script ACP-Weather is loaded, and 2019-10-18 01:25:44.2: the console is idle. 2019-10-18 01:25:44.2: In start loop, i = 0 2019-10-18 01:25:44.2: Console is now idle 2019-10-18 01:25:44.2: Loaded C:\Program Files (x86)\ACP Scheduler\AutoFocusScheduler.vbs successfully 2019-10-18 01:25:44.2: Script started successfully 2019-10-18 01:25:54.2: Sequencer is now active 2019-10-18 01:25:59.3: Sequencer is no longer active 2019-10-18 01:25:59.3: ** ACP script "AutoFocusScheduler" failed: 2019-10-18 01:25:59.3: **Script Error** Source: ACP Message: The telescope is not connected. Location: line 42 column 5. 2019-10-18 01:25:59.3: ** Autofocus failed (n=1), will retry ASAP after 0 min. 2019-10-18 01:25:59.3: Plan KH15D has Monitor Mode. Time to resubmit it. 2019-10-18 01:25:59.3: Plan Test has Monitor Mode. Time to resubmit it. 2019-10-18 01:25:59.3: Plan KH15D-B has Monitor Mode. Time to resubmit it. 2019-10-18 01:25:59.3: SelectRunning: No running plans 2019-10-18 01:25:59.3: Obs KH15D in Plan KH15D was vetoed by AirMass constraint. 2019-10-18 01:25:59.3: AirMass estimates ready after 18-Oct-2019 08:00:06 UTC 2019-10-18 01:25:59.3: Obs KH15D-B in Plan KH15D-B was vetoed by AirMass constraint. 2019-10-18 01:25:59.3: AirMass estimates ready after 18-Oct-2019 08:00:06 UTC 2019-10-18 01:25:59.4: Efficiency: Selecting from 2 pending plans: 2019-10-18 01:25:59.4: Selected Plan SA109 (TotEff=0.00) 2019-10-18 01:25:59.5: Dispatcher cycle time: 0.2 sec. 2019-10-18 01:25:59.5: Acquire data for Observation SA109... 2019-10-18 01:25:59.5: (belongs to Project Landolt fields, Plan SA109) 2019-10-18 01:25:59.5: Doing 3 sets 2019-10-18 01:25:59.5: ++ Auto Focus ++ 2019-10-18 01:25:59.5: Doing periodic autofocus. 2019-10-18 01:25:59.5: Start special ACP AutoFocus script for scheduler 2019-10-18 01:25:59.5: ACP.RunScript(AutoFocusScheduler, ): 2019-10-18 01:25:59.5: Script AutoFocusScheduler is loaded, and 2019-10-18 01:25:59.5: the console is idle. 2019-10-18 01:25:59.5: In start loop, i = 0 2019-10-18 01:25:59.5: Console is now idle 2019-10-18 01:25:59.5: Loaded C:\Program Files (x86)\ACP Scheduler\AutoFocusScheduler.vbs successfully 2019-10-18 01:25:59.5: Script started successfully 2019-10-18 01:26:09.5: Sequencer is now active 2019-10-18 01:26:14.6: Sequencer is no longer active 2019-10-18 01:26:14.6: ** ACP script "AutoFocusScheduler" failed: 2019-10-18 01:26:14.6: **Script Error** Source: ACP Message: The telescope is not connected. Location: line 42 column 5. 2019-10-18 01:26:14.6: ** Autofocus failed (n=2), will retry ASAP after 5 min. 2019-10-18 01:26:14.7: **EXCEPTION IN SCHEDULER: 2019-10-18 01:26:14.7: The telescope is not connected. 2019-10-18 01:26:14.9: Traceback: at ACP.TelescopeClass.get_SlewSettleTime() at DC3.Scheduler.ACPSequencer.AcquireData(Observation Obs) at DC3.Scheduler.Engine.DoSchedulePass() at DC3.Scheduler.Engine.Run() 2019-10-18 01:26:15.0: No operator intervention command tool specified 2019-10-18 01:26:15.0: Run statistics: 2019-10-18 01:26:15.0: Observations: 4 2019-10-18 01:26:15.0: Considered: 0 2019-10-18 01:26:15.0: Completed: 0 2019-10-18 01:26:15.0: Skipped: 0 2019-10-18 01:26:15.0: Never Eligible: 4 2019-10-18 01:26:15.0: Failed: 0 2019-10-18 01:26:15.0: Shutter-Open efficiency: 27.60% 2019-10-18 01:26:15.0: Overall Efficiency: 33.27% 2019-10-18 01:26:15.0: Release ACP sequencer Log closed at Fri, Oct 18 2019 01:26:16 UTC (actual time)