Log opened at Fri, May 05 2017 02:51:51 UTC (actual time) Current log level is Debug Scheduler version 3.5.3 Multi-user license: Arne Henden 05-May-2017 02:51:51.7: ++ Observatory Startup ++ 05-May-2017 02:51:51.7: Start ACP Sequencer's StartupObs script 05-May-2017 02:52:01.7: Sequencer is now active 05-May-2017 02:52:10.4: Sequencer is no longer active 05-May-2017 02:52:10.9: Open the observatory dome/roof 05-May-2017 02:53:31.7: ++ Auto Focus ++ 05-May-2017 02:53:31.8: Doing initial autofocus. 05-May-2017 02:53:31.8: Start special ACP AutoFocus script for scheduler 05-May-2017 02:53:41.8: Sequencer is now active 05-May-2017 02:53:46.8: Sequencer is no longer active 05-May-2017 02:53:46.8: ** Sequencer script "AutoFocusScheduler" failed: 05-May-2017 02:53:46.8: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 68 column 9. Script Context: 65: If Util.Prefs.AutoFocus.UseAcquireStar Then 66: Telescope.Tracking = True ' AcquireStar needs tracking scope 67: Else => 68: Call SUP.StartSlewJ2000("FocusArea", CT.RightAscension, CT.Declination) ^ 69: Call SUP.WaitForSlew() 70: End If 71: -- end -- 05-May-2017 02:53:46.8: ** Autofocus failed (n=1), will retry ASAP after 0 min. 05-May-2017 02:53:47.5: Plan HO_Cam has Monitor Mode. Time to resubmit it. 05-May-2017 02:53:47.5: Plan V1904_Cyg has Monitor Mode. Time to resubmit it. 05-May-2017 02:53:47.5: Plan V1907_Cyg has Monitor Mode. Time to resubmit it. 05-May-2017 02:53:47.5: Plan V2481_Cyg has Monitor Mode. Time to resubmit it. 05-May-2017 02:53:47.5: Plan BC_Lac has Monitor Mode. Time to resubmit it. 05-May-2017 02:53:47.5: Plan NSVS_11201899 has Monitor Mode. Time to resubmit it. 05-May-2017 02:53:47.5: Plan IRAS_19067+2158 has Monitor Mode. Time to resubmit it. 05-May-2017 02:53:47.5: Plan IRAS_19183+2339 has Monitor Mode. Time to resubmit it. 05-May-2017 02:53:47.5: Plan 2MASS_J19395313+0557550 has Monitor Mode. Time to resubmit it. 05-May-2017 02:53:47.5: SelectRunning: No running plans 05-May-2017 02:53:47.6: Obs 2MASS_J19395313+0557550 in Plan 2MASS_J19395313+0557550 was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.6: AirmassRange estimates ready after 05-May-2017 08:00:29 UTC 05-May-2017 02:53:47.6: Obs BC_Lac in Plan BC_Lac was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.6: AirmassRange estimates ready after 05-May-2017 09:36:43 UTC 05-May-2017 02:53:47.6: Obs BX_Pup in Plan BX_Pup was vetoed by AirMass constraint. 05-May-2017 02:53:47.6: AirMass estimates ready after 05-May-2017 21:38:53 UTC 05-May-2017 02:53:47.6: Obs CB_32 in Plan CB_32 was vetoed by AirMass constraint. 05-May-2017 02:53:47.6: AirMass estimates ready after 05-May-2017 18:13:48 UTC 05-May-2017 02:53:47.6: Obs CM_Cas in Plan CM_Cas was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.6: AirmassRange estimates ready after 05-May-2017 12:08:09 UTC 05-May-2017 02:53:47.6: Obs FU_Cam in Plan FU_Cam was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.6: AirmassRange estimates ready after 05-May-2017 13:45:39 UTC 05-May-2017 02:53:47.6: Obs FW_Cam in Plan FW_Cam was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.6: AirmassRange estimates ready after 05-May-2017 13:46:55 UTC 05-May-2017 02:53:47.7: Obs FY_Cam in Plan FY_Cam was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.7: AirmassRange estimates ready after 05-May-2017 14:05:08 UTC 05-May-2017 02:53:47.7: Obs GSC_3649-0825 in Plan GSC_3649-0825 was vetoed by AirMass constraint. 05-May-2017 02:53:47.7: AirMass estimates ready after 05-May-2017 10:13:56 UTC 05-May-2017 02:53:47.7: Obs GSC_4030_204 in Plan GSC_4030_204 was vetoed by AirMass constraint. 05-May-2017 02:53:47.7: AirMass estimates ready after 05-May-2017 11:37:50 UTC 05-May-2017 02:53:47.7: Obs HI_Cam in Plan HI_Cam was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.7: AirmassRange estimates ready after 05-May-2017 15:01:04 UTC 05-May-2017 02:53:47.7: Obs HX_Aur in Plan HX_Aur was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.7: AirmassRange estimates ready after 05-May-2017 15:55:05 UTC 05-May-2017 02:53:47.7: Obs IRAS_19067+2158 in Plan IRAS_19067+2158 was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.7: AirmassRange estimates ready after 05-May-2017 06:51:54 UTC 05-May-2017 02:53:47.7: Obs IRAS_19183+2339 in Plan IRAS_19183+2339 was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.7: AirmassRange estimates ready after 05-May-2017 06:59:58 UTC 05-May-2017 02:53:47.7: Obs M56 in Plan M56 was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.7: AirmassRange estimates ready after 05-May-2017 06:43:35 UTC 05-May-2017 02:53:47.7: Obs MV_Leo in Plan MV_Leo was vetoed by AirMass constraint. 05-May-2017 02:53:47.7: AirMass estimates ready after 05-May-2017 07:12:32 UTC 05-May-2017 02:53:47.7: Obs NGC_7790 in Plan NGC_7790 was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.7: AirmassRange estimates ready after 05-May-2017 10:28:31 UTC 05-May-2017 02:53:47.7: Obs NSVS_11201899 in Plan NSVS_11201899 was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.7: AirmassRange estimates ready after 05-May-2017 06:52:55 UTC 05-May-2017 02:53:47.8: Obs QQ_Vul_TMO61 in Plan QQ_Vul was vetoed by AirMass constraint. 05-May-2017 02:53:47.8: AirMass estimates ready after 05-May-2017 07:16:16 UTC 05-May-2017 02:53:47.8: Obs SDSSJ121027+502735 in Plan SDSSJ121027+502735 was vetoed by MoonDown constraint. 05-May-2017 02:53:47.8: MoonDown estimates ready after 05-May-2017 09:40:39 UTC 05-May-2017 02:53:47.8: Obs T_Ori in Plan T_Ori was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.8: AirmassRange estimates ready after 05-May-2017 18:30:37 UTC 05-May-2017 02:53:47.8: Obs U_Aqr in Plan U_Aqr was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.8: AirmassRange estimates ready after 05-May-2017 11:50:16 UTC 05-May-2017 02:53:47.8: Obs V0336_Ser in Plan V0336_Ser was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.8: AirmassRange estimates ready after 05-May-2017 03:47:43 UTC 05-May-2017 02:53:47.8: Obs V0524_Cas in Plan V0524_Cas was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.8: AirmassRange estimates ready after 05-May-2017 10:58:20 UTC 05-May-2017 02:53:47.8: Obs V0603_Per in Plan V0603_Per was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.8: AirmassRange estimates ready after 05-May-2017 14:35:50 UTC 05-May-2017 02:53:47.8: Obs V0809_Cep in Plan V0809_Cep was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.8: AirmassRange estimates ready after 05-May-2017 09:39:11 UTC 05-May-2017 02:53:47.8: Obs V0959_Mon in Plan V0959_Mon was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.8: AirmassRange estimates ready after 05-May-2017 18:58:38 UTC 05-May-2017 02:53:47.8: Obs V0965_Per in Plan V0965_Per was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.8: AirmassRange estimates ready after 05-May-2017 14:24:17 UTC 05-May-2017 02:53:47.8: Obs V1015_Her in Plan V1015_Her was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.8: AirmassRange estimates ready after 05-May-2017 05:12:11 UTC 05-May-2017 02:53:47.8: Obs V1721_Aql in Plan V1721_Aql was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.8: AirmassRange estimates ready after 05-May-2017 07:24:06 UTC 05-May-2017 02:53:47.9: Obs V1722_Aql in Plan V1722_Aql was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.9: AirmassRange estimates ready after 05-May-2017 07:11:48 UTC 05-May-2017 02:53:47.9: Obs V1723_Aql in Plan V1723_Aql was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.9: AirmassRange estimates ready after 05-May-2017 07:38:10 UTC 05-May-2017 02:53:47.9: Obs V1724_Aql in Plan V1724_Aql was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.9: AirmassRange estimates ready after 05-May-2017 07:31:37 UTC 05-May-2017 02:53:47.9: Obs V1904_Cyg in Plan V1904_Cyg was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.9: AirmassRange estimates ready after 05-May-2017 08:44:18 UTC 05-May-2017 02:53:47.9: Obs V1907_Cyg in Plan V1907_Cyg was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.9: AirmassRange estimates ready after 05-May-2017 08:40:58 UTC 05-May-2017 02:53:47.9: Obs V2481_Cyg in Plan V2481_Cyg was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.9: AirmassRange estimates ready after 05-May-2017 08:16:56 UTC 05-May-2017 02:53:47.9: Obs V339_Del_TMO61 in Plan V339_Del_TMO61 was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.9: AirmassRange estimates ready after 05-May-2017 08:08:59 UTC 05-May-2017 02:53:47.9: Obs V841_Oph in Plan V841_Oph was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.9: AirmassRange estimates ready after 05-May-2017 06:27:25 UTC 05-May-2017 02:53:47.9: Obs WZ_Per in Plan WZ_Per was vetoed by AirmassRange constraint. 05-May-2017 02:53:47.9: AirmassRange estimates ready after 05-May-2017 14:44:36 UTC 05-May-2017 02:53:47.9: Efficiency: Selecting from 13 pending plans: 05-May-2017 02:53:48.0: Selected Plan HO_Cam (TotEff=1.18) 05-May-2017 02:53:48.1: Dispatcher cycle time: 1.3020745 sec. 05-May-2017 02:53:48.1: Acquire data for Observation HO_Cam... 05-May-2017 02:53:48.1: (belongs to Project AAVSO_HGUA_Miras_Manual_ver167, Plan HO_Cam) 05-May-2017 02:53:48.1: Send Observation HO_Cam to ACP Sequencer 05-May-2017 02:53:58.1: Sequencer is now active 05-May-2017 02:54:03.1: Sequencer is no longer active 05-May-2017 02:54:03.1: ** Sequencer script "AcquireScheduler" failed: 05-May-2017 02:54:03.1: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 05-May-2017 02:54:06.1: Post-job status check done (stat=Running) 05-May-2017 02:54:06.1: ACP ERROR: Run failed due to script error (see ACP run log) 05-May-2017 02:54:06.1: ACP data acquisition failed for Observation HO_Cam. 05-May-2017 02:54:06.1: (Observation HO_Cam interrupted by acquisition process failure.) 05-May-2017 02:54:06.3: ++ Auto Focus ++ 05-May-2017 02:54:06.3: Doing periodic autofocus. 05-May-2017 02:54:06.3: Start special ACP AutoFocus script for scheduler 05-May-2017 02:54:16.3: Sequencer is now active 05-May-2017 02:54:35.1: Sequencer is no longer active 05-May-2017 02:54:35.1: ** Sequencer script "AutoFocusScheduler" failed: 05-May-2017 02:54:35.1: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 68 column 9. Script Context: 65: If Util.Prefs.AutoFocus.UseAcquireStar Then 66: Telescope.Tracking = True ' AcquireStar needs tracking scope 67: Else => 68: Call SUP.StartSlewJ2000("FocusArea", CT.RightAscension, CT.Declination) ^ 69: Call SUP.WaitForSlew() 70: End If 71: -- end -- 05-May-2017 02:54:35.1: ** Autofocus failed (n=2), will retry ASAP after 5 min. 05-May-2017 02:54:35.1: SelectRunning: No running plans 05-May-2017 02:54:35.6: Efficiency: Selecting from 12 pending plans: 05-May-2017 02:54:35.6: Selected Plan HQ_Aur (TotEff=1.18) 05-May-2017 02:54:35.7: Dispatcher cycle time: 0.5480314 sec. 05-May-2017 02:54:35.7: Acquire data for Observation HQ_Aur... 05-May-2017 02:54:35.7: (belongs to Project AAVSO_HGUA_Miras_Manual_ver167, Plan HQ_Aur) 05-May-2017 02:54:35.7: Send Observation HQ_Aur to ACP Sequencer 05-May-2017 02:54:45.7: Sequencer is now active 05-May-2017 02:55:09.9: Sequencer is no longer active 05-May-2017 02:55:09.9: ** Sequencer script "AcquireScheduler" failed: 05-May-2017 02:55:09.9: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 05-May-2017 02:55:12.9: Post-job status check done (stat=Running) 05-May-2017 02:55:12.9: ACP ERROR: Run failed due to script error (see ACP run log) 05-May-2017 02:55:12.9: ACP data acquisition failed for Observation HQ_Aur. 05-May-2017 02:55:12.9: (Observation HQ_Aur interrupted by acquisition process failure.) 05-May-2017 02:55:13.2: SelectRunning: No running plans 05-May-2017 02:55:13.3: Efficiency: Selecting from 11 pending plans: 05-May-2017 02:55:13.3: Selected Plan MP_Gem (TotEff=1.15) 05-May-2017 02:55:13.4: Dispatcher cycle time: 0.193011 sec. 05-May-2017 02:55:13.4: Acquire data for Observation MP_Gem... 05-May-2017 02:55:13.4: (belongs to Project Staels, Plan MP_Gem) 05-May-2017 02:55:13.4: Send Observation MP_Gem to ACP Sequencer 05-May-2017 02:55:23.4: Sequencer is now active 05-May-2017 02:55:44.4: Sequencer is no longer active 05-May-2017 02:55:44.4: ** Sequencer script "AcquireScheduler" failed: 05-May-2017 02:55:44.4: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 05-May-2017 02:55:47.4: Post-job status check done (stat=Running) 05-May-2017 02:55:47.4: ACP ERROR: Run failed due to script error (see ACP run log) 05-May-2017 02:55:47.4: ACP data acquisition failed for Observation MP_Gem. 05-May-2017 02:55:47.4: (Observation MP_Gem interrupted by acquisition process failure.) 05-May-2017 02:55:47.6: SelectRunning: No running plans 05-May-2017 02:55:47.7: Efficiency: Selecting from 10 pending plans: 05-May-2017 02:55:47.8: Selected Plan DN_Lyn (TotEff=1.01) 05-May-2017 02:55:47.8: Dispatcher cycle time: 0.1900108 sec. 05-May-2017 02:55:47.8: Acquire data for Observation DN_Lyn... 05-May-2017 02:55:47.8: (belongs to Project AAVSO_HGUA_Miras_Manual_ver167, Plan DN_Lyn) 05-May-2017 02:55:47.8: Send Observation DN_Lyn to ACP Sequencer 05-May-2017 02:55:57.8: Sequencer is now active 05-May-2017 02:56:03.0: Sequencer is no longer active 05-May-2017 02:56:03.0: ** Sequencer script "AcquireScheduler" failed: 05-May-2017 02:56:03.0: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 05-May-2017 02:56:06.0: Post-job status check done (stat=Running) 05-May-2017 02:56:06.0: ACP ERROR: Run failed due to script error (see ACP run log) 05-May-2017 02:56:06.0: ACP data acquisition failed for Observation DN_Lyn. 05-May-2017 02:56:06.0: (Observation DN_Lyn interrupted by acquisition process failure.) 05-May-2017 02:56:06.1: SelectRunning: No running plans 05-May-2017 02:56:06.2: Efficiency: Selecting from 9 pending plans: 05-May-2017 02:56:06.2: Selected Plan SDSS073224 (TotEff=0.87) 05-May-2017 02:56:06.3: Dispatcher cycle time: 0.1710098 sec. 05-May-2017 02:56:06.3: Acquire data for Observation SDSS073224... 05-May-2017 02:56:06.3: (belongs to Project AGN, Plan SDSS073224) 05-May-2017 02:56:06.3: Send Observation SDSS073224 to ACP Sequencer 05-May-2017 02:56:16.3: Sequencer is now active 05-May-2017 02:56:21.5: Sequencer is no longer active 05-May-2017 02:56:21.5: ** Sequencer script "AcquireScheduler" failed: 05-May-2017 02:56:21.5: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 05-May-2017 02:56:24.5: Post-job status check done (stat=Running) 05-May-2017 02:56:24.5: ACP ERROR: Run failed due to script error (see ACP run log) 05-May-2017 02:56:24.5: ACP data acquisition failed for Observation SDSS073224. 05-May-2017 02:56:24.5: (Observation SDSS073224 interrupted by acquisition process failure.) 05-May-2017 02:56:25.0: SelectRunning: No running plans 05-May-2017 02:56:25.1: Efficiency: Selecting from 8 pending plans: 05-May-2017 02:56:25.1: Selected Plan SY_Cnc (TotEff=0.85) 05-May-2017 02:56:25.2: Dispatcher cycle time: 0.1520087 sec. 05-May-2017 02:56:25.2: Acquire data for Observation SY_Cnc... 05-May-2017 02:56:25.2: (belongs to Project SXN, Plan SY_Cnc) 05-May-2017 02:56:25.2: Send Observation SY_Cnc to ACP Sequencer 05-May-2017 02:56:35.2: Sequencer is now active 05-May-2017 02:56:56.9: Sequencer is no longer active 05-May-2017 02:56:56.9: ** Sequencer script "AcquireScheduler" failed: 05-May-2017 02:56:56.9: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 05-May-2017 02:56:59.9: Post-job status check done (stat=Running) 05-May-2017 02:56:59.9: ACP ERROR: Run failed due to script error (see ACP run log) 05-May-2017 02:56:59.9: ACP data acquisition failed for Observation SY_Cnc. 05-May-2017 02:56:59.9: (Observation SY_Cnc interrupted by acquisition process failure.) 05-May-2017 02:57:00.1: SelectRunning: No running plans 05-May-2017 02:57:00.2: Efficiency: Selecting from 7 pending plans: 05-May-2017 02:57:00.3: Selected Plan M67 (TotEff=0.84) 05-May-2017 02:57:00.3: Dispatcher cycle time: 0.1500085 sec. 05-May-2017 02:57:00.3: Acquire data for Observation M67... 05-May-2017 02:57:00.3: (belongs to Project AAVSO_Monitoring, Plan M67) 05-May-2017 02:57:00.3: Send Observation M67 to ACP Sequencer 05-May-2017 02:57:10.3: Sequencer is now active 05-May-2017 02:57:15.3: Sequencer is no longer active 05-May-2017 02:57:15.3: ** Sequencer script "AcquireScheduler" failed: 05-May-2017 02:57:15.3: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 05-May-2017 02:57:18.3: Post-job status check done (stat=Running) 05-May-2017 02:57:18.3: ACP ERROR: Run failed due to script error (see ACP run log) 05-May-2017 02:57:18.3: ACP data acquisition failed for Observation M67. 05-May-2017 02:57:18.3: (Observation M67 interrupted by acquisition process failure.) 05-May-2017 02:57:18.5: SelectRunning: No running plans 05-May-2017 02:57:18.5: Efficiency: Selecting from 6 pending plans: 05-May-2017 02:57:18.6: Selected Plan AT_Cnc (TotEff=0.75) 05-May-2017 02:57:18.6: Dispatcher cycle time: 0.1390079 sec. 05-May-2017 02:57:18.6: Acquire data for Observation AT_Cnc... 05-May-2017 02:57:18.6: (belongs to Project SXN, Plan AT_Cnc) 05-May-2017 02:57:18.6: Send Observation AT_Cnc to ACP Sequencer 05-May-2017 02:57:28.6: Sequencer is now active 05-May-2017 02:57:33.9: Sequencer is no longer active 05-May-2017 02:57:33.9: ** Sequencer script "AcquireScheduler" failed: 05-May-2017 02:57:33.9: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 05-May-2017 02:57:36.9: Post-job status check done (stat=Running) 05-May-2017 02:57:36.9: ACP ERROR: Run failed due to script error (see ACP run log) 05-May-2017 02:57:36.9: ACP data acquisition failed for Observation AT_Cnc. 05-May-2017 02:57:36.9: (Observation AT_Cnc interrupted by acquisition process failure.) 05-May-2017 02:57:37.1: SelectRunning: No running plans 05-May-2017 02:57:37.1: Efficiency: Selecting from 5 pending plans: 05-May-2017 02:57:37.1: Selected Plan Z_Cam (TotEff=0.52) 05-May-2017 02:57:37.2: Dispatcher cycle time: 0.122007 sec. 05-May-2017 02:57:37.2: Acquire data for Observation Z_Cam... 05-May-2017 02:57:37.2: (belongs to Project SXN, Plan Z_Cam) 05-May-2017 02:57:37.2: Send Observation Z_Cam to ACP Sequencer 05-May-2017 02:57:47.2: Sequencer is now active 05-May-2017 02:57:52.2: Sequencer is no longer active 05-May-2017 02:57:52.2: ** Sequencer script "AcquireScheduler" failed: 05-May-2017 02:57:52.2: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 05-May-2017 02:57:55.2: Post-job status check done (stat=Running) 05-May-2017 02:57:55.2: ACP ERROR: Run failed due to script error (see ACP run log) 05-May-2017 02:57:55.2: ACP data acquisition failed for Observation Z_Cam. 05-May-2017 02:57:55.2: (Observation Z_Cam interrupted by acquisition process failure.) 05-May-2017 02:57:55.4: SelectRunning: No running plans 05-May-2017 02:57:55.4: Efficiency: Selecting from 4 pending plans: 05-May-2017 02:57:55.4: Selected Plan CV_Vir (TotEff=0.38) 05-May-2017 02:57:55.5: Dispatcher cycle time: 0.1010057 sec. 05-May-2017 02:57:55.5: Acquire data for Observation CV_Vir... 05-May-2017 02:57:55.5: (belongs to Project AAVSO_HGUA_Miras_Manual_ver167, Plan CV_Vir) 05-May-2017 02:57:55.5: Send Observation CV_Vir to ACP Sequencer 05-May-2017 02:58:05.5: Sequencer is now active 05-May-2017 02:58:23.6: Sequencer is no longer active 05-May-2017 02:58:23.6: ** Sequencer script "AcquireScheduler" failed: 05-May-2017 02:58:23.6: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 05-May-2017 02:58:26.6: Post-job status check done (stat=Running) 05-May-2017 02:58:26.6: ACP ERROR: Run failed due to script error (see ACP run log) 05-May-2017 02:58:26.6: ACP data acquisition failed for Observation CV_Vir. 05-May-2017 02:58:26.6: (Observation CV_Vir interrupted by acquisition process failure.) 05-May-2017 02:58:26.8: SelectRunning: No running plans 05-May-2017 02:58:26.9: Efficiency: Selecting from 3 pending plans: 05-May-2017 02:58:26.9: Selected Plan KK_UMa (TotEff=0.30) 05-May-2017 02:58:26.9: Dispatcher cycle time: 0.104006 sec. 05-May-2017 02:58:26.9: Acquire data for Observation KK_UMa... 05-May-2017 02:58:26.9: (belongs to Project AAVSO_HGUA_Miras_Manual_ver167, Plan KK_UMa) 05-May-2017 02:58:26.9: Send Observation KK_UMa to ACP Sequencer 05-May-2017 02:58:36.9: Sequencer is now active 05-May-2017 02:58:50.3: Sequencer is no longer active 05-May-2017 02:58:50.3: ** Sequencer script "AcquireScheduler" failed: 05-May-2017 02:58:50.3: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 05-May-2017 02:58:53.3: Post-job status check done (stat=Running) 05-May-2017 02:58:53.3: ACP ERROR: Run failed due to script error (see ACP run log) 05-May-2017 02:58:53.3: ACP data acquisition failed for Observation KK_UMa. 05-May-2017 02:58:53.3: (Observation KK_UMa interrupted by acquisition process failure.) 05-May-2017 02:58:53.8: SelectRunning: No running plans 05-May-2017 02:58:53.9: Efficiency: Selecting from 2 pending plans: 05-May-2017 02:58:53.9: Selected Plan AL_Boo (TotEff=0.26) 05-May-2017 02:58:53.9: Dispatcher cycle time: 0.0790045 sec. 05-May-2017 02:58:53.9: Acquire data for Observation AL_Boo... 05-May-2017 02:58:53.9: (belongs to Project AAVSO_HGUA_Miras_Manual_ver167, Plan AL_Boo) 05-May-2017 02:58:53.9: Send Observation AL_Boo to ACP Sequencer 05-May-2017 02:59:03.9: Sequencer is now active 05-May-2017 02:59:17.1: Sequencer is no longer active 05-May-2017 02:59:17.1: ** Sequencer script "AcquireScheduler" failed: 05-May-2017 02:59:17.1: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 05-May-2017 02:59:20.2: Post-job status check done (stat=Running) 05-May-2017 02:59:20.2: ACP ERROR: Run failed due to script error (see ACP run log) 05-May-2017 02:59:20.2: ACP data acquisition failed for Observation AL_Boo. 05-May-2017 02:59:20.2: (Observation AL_Boo interrupted by acquisition process failure.) 05-May-2017 02:59:20.5: SelectRunning: No running plans 05-May-2017 02:59:20.6: Efficiency: Only one pending plan ES_Dra, it is the "best" 05-May-2017 02:59:20.6: Dispatcher cycle time: 0.0590034 sec. 05-May-2017 02:59:20.6: Acquire data for Observation ES_Dra... 05-May-2017 02:59:20.6: (belongs to Project SXN, Plan ES_Dra) 05-May-2017 02:59:20.6: Send Observation ES_Dra to ACP Sequencer 05-May-2017 02:59:30.6: Sequencer is now active 05-May-2017 02:59:38.2: Sequencer is no longer active 05-May-2017 02:59:38.2: ** Sequencer script "AcquireScheduler" failed: 05-May-2017 02:59:38.2: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 05-May-2017 02:59:41.2: Post-job status check done (stat=Running) 05-May-2017 02:59:41.2: ACP ERROR: Run failed due to script error (see ACP run log) 05-May-2017 02:59:41.2: ACP data acquisition failed for Observation ES_Dra. 05-May-2017 02:59:41.2: (Observation ES_Dra interrupted by acquisition process failure.) 05-May-2017 02:59:41.4: ++ Auto Focus ++ 05-May-2017 02:59:41.5: Doing periodic autofocus. 05-May-2017 02:59:41.5: Start special ACP AutoFocus script for scheduler 05-May-2017 02:59:51.5: Sequencer is now active 05-May-2017 02:59:56.5: Sequencer is no longer active 05-May-2017 02:59:56.5: ** Sequencer script "AutoFocusScheduler" failed: 05-May-2017 02:59:56.5: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 68 column 9. Script Context: 65: If Util.Prefs.AutoFocus.UseAcquireStar Then 66: Telescope.Tracking = True ' AcquireStar needs tracking scope 67: Else => 68: Call SUP.StartSlewJ2000("FocusArea", CT.RightAscension, CT.Declination) ^ 69: Call SUP.WaitForSlew() 70: End If 71: -- end -- 05-May-2017 02:59:56.5: ** Autofocus failed (n=3), will retry ASAP after 10 min. 05-May-2017 02:59:56.5: SelectRunning: No running plans 05-May-2017 02:59:56.6: No pending plans that can be started now. 05-May-2017 02:59:56.6: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 03:00:26.9: SelectRunning: No running plans 05-May-2017 03:00:26.9: No pending plans that can be started now. 05-May-2017 03:00:26.9: Dispatcher cycle time: 0.0120007 sec. 05-May-2017 03:00:57.1: SelectRunning: No running plans 05-May-2017 03:00:57.1: No pending plans that can be started now. 05-May-2017 03:00:57.1: Dispatcher cycle time: 0.0120007 sec. 05-May-2017 03:01:27.5: SelectRunning: No running plans 05-May-2017 03:01:27.5: No pending plans that can be started now. 05-May-2017 03:01:27.5: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:01:58.4: SelectRunning: No running plans 05-May-2017 03:01:58.4: No pending plans that can be started now. 05-May-2017 03:01:58.4: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:02:28.5: SelectRunning: No running plans 05-May-2017 03:02:28.5: No pending plans that can be started now. 05-May-2017 03:02:28.5: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:02:58.7: SelectRunning: No running plans 05-May-2017 03:02:58.7: No pending plans that can be started now. 05-May-2017 03:02:58.7: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:03:28.8: SelectRunning: No running plans 05-May-2017 03:03:28.8: No pending plans that can be started now. 05-May-2017 03:03:28.8: Dispatcher cycle time: 0.0120007 sec. 05-May-2017 03:03:59.4: SelectRunning: No running plans 05-May-2017 03:03:59.4: No pending plans that can be started now. 05-May-2017 03:03:59.4: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 03:04:29.5: SelectRunning: No running plans 05-May-2017 03:04:29.5: No pending plans that can be started now. 05-May-2017 03:04:29.5: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:04:59.8: SelectRunning: No running plans 05-May-2017 03:04:59.8: No pending plans that can be started now. 05-May-2017 03:04:59.8: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:05:30.6: SelectRunning: No running plans 05-May-2017 03:05:30.6: No pending plans that can be started now. 05-May-2017 03:05:30.6: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 03:06:01.3: SelectRunning: No running plans 05-May-2017 03:06:01.3: No pending plans that can be started now. 05-May-2017 03:06:01.3: Dispatcher cycle time: 0.0120007 sec. 05-May-2017 03:06:31.5: SelectRunning: No running plans 05-May-2017 03:06:31.5: No pending plans that can be started now. 05-May-2017 03:06:31.5: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:07:01.7: SelectRunning: No running plans 05-May-2017 03:07:01.7: No pending plans that can be started now. 05-May-2017 03:07:01.7: Dispatcher cycle time: 0.0120007 sec. 05-May-2017 03:07:31.8: SelectRunning: No running plans 05-May-2017 03:07:31.8: No pending plans that can be started now. 05-May-2017 03:07:31.8: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 03:08:01.9: SelectRunning: No running plans 05-May-2017 03:08:01.9: No pending plans that can be started now. 05-May-2017 03:08:01.9: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:08:32.2: SelectRunning: No running plans 05-May-2017 03:08:32.2: No pending plans that can be started now. 05-May-2017 03:08:32.2: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 03:09:02.4: SelectRunning: No running plans 05-May-2017 03:09:02.4: No pending plans that can be started now. 05-May-2017 03:09:02.4: Dispatcher cycle time: 0.0150009 sec. 05-May-2017 03:09:32.9: SelectRunning: No running plans 05-May-2017 03:09:32.9: No pending plans that can be started now. 05-May-2017 03:09:32.9: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 03:10:03.1: ++ Auto Focus ++ 05-May-2017 03:10:03.1: Doing periodic autofocus. 05-May-2017 03:10:03.1: Start special ACP AutoFocus script for scheduler 05-May-2017 03:10:13.1: Sequencer is now active 05-May-2017 03:10:18.6: Sequencer is no longer active 05-May-2017 03:10:18.6: ** Sequencer script "AutoFocusScheduler" failed: 05-May-2017 03:10:18.6: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 68 column 9. Script Context: 65: If Util.Prefs.AutoFocus.UseAcquireStar Then 66: Telescope.Tracking = True ' AcquireStar needs tracking scope 67: Else => 68: Call SUP.StartSlewJ2000("FocusArea", CT.RightAscension, CT.Declination) ^ 69: Call SUP.WaitForSlew() 70: End If 71: -- end -- 05-May-2017 03:10:18.6: ** Autofocus failed (n=4), will retry ASAP after 15 min. 05-May-2017 03:10:18.6: SelectRunning: No running plans 05-May-2017 03:10:18.6: No pending plans that can be started now. 05-May-2017 03:10:18.6: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 03:10:48.8: SelectRunning: No running plans 05-May-2017 03:10:48.8: No pending plans that can be started now. 05-May-2017 03:10:48.8: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 03:11:18.9: SelectRunning: No running plans 05-May-2017 03:11:19.0: No pending plans that can be started now. 05-May-2017 03:11:19.0: Dispatcher cycle time: 0.0120007 sec. 05-May-2017 03:11:49.2: SelectRunning: No running plans 05-May-2017 03:11:49.2: No pending plans that can be started now. 05-May-2017 03:11:49.2: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 03:12:19.4: SelectRunning: No running plans 05-May-2017 03:12:19.4: No pending plans that can be started now. 05-May-2017 03:12:19.4: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 03:12:50.3: SelectRunning: No running plans 05-May-2017 03:12:50.3: No pending plans that can be started now. 05-May-2017 03:12:50.3: Dispatcher cycle time: 0.0200012 sec. 05-May-2017 03:13:20.4: SelectRunning: No running plans 05-May-2017 03:13:20.4: No pending plans that can be started now. 05-May-2017 03:13:20.4: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:13:50.9: SelectRunning: No running plans 05-May-2017 03:13:50.9: No pending plans that can be started now. 05-May-2017 03:13:50.9: Dispatcher cycle time: 0.0120007 sec. 05-May-2017 03:14:21.0: SelectRunning: No running plans 05-May-2017 03:14:21.0: No pending plans that can be started now. 05-May-2017 03:14:21.0: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:14:51.4: SelectRunning: No running plans 05-May-2017 03:14:51.4: No pending plans that can be started now. 05-May-2017 03:14:51.4: Dispatcher cycle time: 0.0120007 sec. 05-May-2017 03:15:21.8: SelectRunning: No running plans 05-May-2017 03:15:21.8: No pending plans that can be started now. 05-May-2017 03:15:21.8: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 03:15:52.0: SelectRunning: No running plans 05-May-2017 03:15:52.0: No pending plans that can be started now. 05-May-2017 03:15:52.0: Dispatcher cycle time: 0.0200011 sec. 05-May-2017 03:16:22.2: SelectRunning: No running plans 05-May-2017 03:16:22.2: No pending plans that can be started now. 05-May-2017 03:16:22.2: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 03:16:52.4: SelectRunning: No running plans 05-May-2017 03:16:52.4: No pending plans that can be started now. 05-May-2017 03:16:52.4: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:17:22.7: SelectRunning: No running plans 05-May-2017 03:17:22.7: No pending plans that can be started now. 05-May-2017 03:17:22.7: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 03:17:52.8: SelectRunning: No running plans 05-May-2017 03:17:52.8: No pending plans that can be started now. 05-May-2017 03:17:52.8: Dispatcher cycle time: 0.0120007 sec. 05-May-2017 03:18:23.0: SelectRunning: No running plans 05-May-2017 03:18:23.0: No pending plans that can be started now. 05-May-2017 03:18:23.0: Dispatcher cycle time: 0.0120007 sec. 05-May-2017 03:18:33.5: Dispatcher stopped at 05-May-2017 03:18:33 UTC 05-May-2017 03:18:33.5: **DISPATCHER INTERRUPT LEVEL 1 RECEIVED** 05-May-2017 03:18:38.4: Dispatcher started at 05-May-2017 03:18:38 UTC 05-May-2017 03:18:38.4: Priority: W[0]=0.00 05-May-2017 03:18:38.4: Transit Altitude: W[1]=0.00 05-May-2017 03:18:38.4: Highest Altitude: W[6]=0.00 05-May-2017 03:18:38.4: Lateness: W[5]=0.70 05-May-2017 03:18:38.4: Slew Distance: W[2]=0.00 05-May-2017 03:18:38.4: Retry Count: W[3]=0.20 05-May-2017 03:18:38.4: Meridian Crossing: W[4]=0.30 05-May-2017 03:18:38.4: Obs Conditions: W[7]=0.40 05-May-2017 03:18:38.4: Rising Plan Delay: disabled 05-May-2017 03:18:38.9: ++ Observatory Startup ++ 05-May-2017 03:18:38.9: Start ACP Sequencer's StartupObs script 05-May-2017 03:18:48.9: Sequencer is now active 05-May-2017 03:18:54.1: Sequencer is no longer active 05-May-2017 03:18:54.1: ++ Auto Focus ++ 05-May-2017 03:18:54.1: Doing initial autofocus. 05-May-2017 03:18:54.1: Start special ACP AutoFocus script for scheduler 05-May-2017 03:19:04.1: Sequencer is now active 05-May-2017 03:19:09.1: Sequencer is no longer active 05-May-2017 03:19:09.1: ** Sequencer script "AutoFocusScheduler" failed: 05-May-2017 03:19:09.1: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 68 column 9. Script Context: 65: If Util.Prefs.AutoFocus.UseAcquireStar Then 66: Telescope.Tracking = True ' AcquireStar needs tracking scope 67: Else => 68: Call SUP.StartSlewJ2000("FocusArea", CT.RightAscension, CT.Declination) ^ 69: Call SUP.WaitForSlew() 70: End If 71: -- end -- 05-May-2017 03:19:09.1: ** Autofocus failed (n=1), will retry ASAP after 0 min. 05-May-2017 03:19:09.5: SelectRunning: No running plans 05-May-2017 03:19:09.5: No pending plans that can be started now. 05-May-2017 03:19:09.5: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:19:39.7: ++ Auto Focus ++ 05-May-2017 03:19:39.7: Doing periodic autofocus. 05-May-2017 03:19:39.7: Start special ACP AutoFocus script for scheduler 05-May-2017 03:19:49.7: Sequencer is now active 05-May-2017 03:19:54.7: Sequencer is no longer active 05-May-2017 03:19:54.7: ** Sequencer script "AutoFocusScheduler" failed: 05-May-2017 03:19:54.7: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 68 column 9. Script Context: 65: If Util.Prefs.AutoFocus.UseAcquireStar Then 66: Telescope.Tracking = True ' AcquireStar needs tracking scope 67: Else => 68: Call SUP.StartSlewJ2000("FocusArea", CT.RightAscension, CT.Declination) ^ 69: Call SUP.WaitForSlew() 70: End If 71: -- end -- 05-May-2017 03:19:54.7: ** Autofocus failed (n=2), will retry ASAP after 5 min. 05-May-2017 03:19:54.7: SelectRunning: No running plans 05-May-2017 03:19:54.7: No pending plans that can be started now. 05-May-2017 03:19:54.7: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 03:20:06.8: Dispatcher stopped at 05-May-2017 03:20:06 UTC 05-May-2017 03:20:06.8: **DISPATCHER INTERRUPT LEVEL 1 RECEIVED** 05-May-2017 03:20:32.7: Dispatcher started at 05-May-2017 03:20:32 UTC 05-May-2017 03:20:32.7: Priority: W[0]=0.00 05-May-2017 03:20:32.7: Transit Altitude: W[1]=0.00 05-May-2017 03:20:32.7: Highest Altitude: W[6]=0.00 05-May-2017 03:20:32.7: Lateness: W[5]=0.70 05-May-2017 03:20:32.7: Slew Distance: W[2]=0.00 05-May-2017 03:20:32.7: Retry Count: W[3]=0.20 05-May-2017 03:20:32.7: Meridian Crossing: W[4]=0.30 05-May-2017 03:20:32.7: Obs Conditions: W[7]=0.40 05-May-2017 03:20:32.7: Rising Plan Delay: disabled 05-May-2017 03:20:33.5: ++ Observatory Startup ++ 05-May-2017 03:20:33.5: Start ACP Sequencer's StartupObs script 05-May-2017 03:20:43.5: Sequencer is now active 05-May-2017 03:20:48.6: Sequencer is no longer active 05-May-2017 03:20:48.6: ++ Auto Focus ++ 05-May-2017 03:20:48.6: Doing initial autofocus. 05-May-2017 03:20:48.6: Start special ACP AutoFocus script for scheduler 05-May-2017 03:20:58.6: Sequencer is now active 05-May-2017 03:21:03.8: Sequencer is no longer active 05-May-2017 03:21:03.8: ** Sequencer script "AutoFocusScheduler" failed: 05-May-2017 03:21:03.8: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 68 column 9. Script Context: 65: If Util.Prefs.AutoFocus.UseAcquireStar Then 66: Telescope.Tracking = True ' AcquireStar needs tracking scope 67: Else => 68: Call SUP.StartSlewJ2000("FocusArea", CT.RightAscension, CT.Declination) ^ 69: Call SUP.WaitForSlew() 70: End If 71: -- end -- 05-May-2017 03:21:03.8: ** Autofocus failed (n=1), will retry ASAP after 0 min. 05-May-2017 03:21:03.8: SelectRunning: No running plans 05-May-2017 03:21:03.8: No pending plans that can be started now. 05-May-2017 03:21:03.8: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:21:34.0: ++ Auto Focus ++ 05-May-2017 03:21:34.0: Doing periodic autofocus. 05-May-2017 03:21:34.0: Start special ACP AutoFocus script for scheduler 05-May-2017 03:21:44.0: Sequencer is now active 05-May-2017 03:21:49.1: Sequencer is no longer active 05-May-2017 03:21:49.1: ** Sequencer script "AutoFocusScheduler" failed: 05-May-2017 03:21:49.1: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 68 column 9. Script Context: 65: If Util.Prefs.AutoFocus.UseAcquireStar Then 66: Telescope.Tracking = True ' AcquireStar needs tracking scope 67: Else => 68: Call SUP.StartSlewJ2000("FocusArea", CT.RightAscension, CT.Declination) ^ 69: Call SUP.WaitForSlew() 70: End If 71: -- end -- 05-May-2017 03:21:49.1: ** Autofocus failed (n=2), will retry ASAP after 5 min. 05-May-2017 03:21:49.1: SelectRunning: No running plans 05-May-2017 03:21:49.1: No pending plans that can be started now. 05-May-2017 03:21:49.1: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 03:22:19.6: SelectRunning: No running plans 05-May-2017 03:22:19.6: No pending plans that can be started now. 05-May-2017 03:22:19.6: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 03:22:49.8: SelectRunning: No running plans 05-May-2017 03:22:49.8: No pending plans that can be started now. 05-May-2017 03:22:49.8: Dispatcher cycle time: 0.0150009 sec. 05-May-2017 03:23:18.8: Dispatcher stopped at 05-May-2017 03:23:18 UTC 05-May-2017 03:23:18.8: **DISPATCHER INTERRUPT LEVEL 1 RECEIVED** 05-May-2017 03:23:27.5: Dispatcher started at 05-May-2017 03:23:27 UTC 05-May-2017 03:23:27.5: Priority: W[0]=0.00 05-May-2017 03:23:27.5: Transit Altitude: W[1]=0.00 05-May-2017 03:23:27.5: Highest Altitude: W[6]=0.00 05-May-2017 03:23:27.5: Lateness: W[5]=0.70 05-May-2017 03:23:27.5: Slew Distance: W[2]=0.00 05-May-2017 03:23:27.5: Retry Count: W[3]=0.20 05-May-2017 03:23:27.5: Meridian Crossing: W[4]=0.30 05-May-2017 03:23:27.5: Obs Conditions: W[7]=0.40 05-May-2017 03:23:27.5: Rising Plan Delay: disabled 05-May-2017 03:23:28.2: ++ Observatory Startup ++ 05-May-2017 03:23:28.2: Start ACP Sequencer's StartupObs script 05-May-2017 03:23:38.2: Sequencer is now active 05-May-2017 03:23:43.3: Sequencer is no longer active 05-May-2017 03:23:43.3: ++ Auto Focus ++ 05-May-2017 03:23:43.3: Doing initial autofocus. 05-May-2017 03:23:43.3: Start special ACP AutoFocus script for scheduler 05-May-2017 03:23:53.3: Sequencer is now active 05-May-2017 03:23:58.6: Sequencer is no longer active 05-May-2017 03:23:58.6: ** Sequencer script "AutoFocusScheduler" failed: 05-May-2017 03:23:58.6: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 68 column 9. Script Context: 65: If Util.Prefs.AutoFocus.UseAcquireStar Then 66: Telescope.Tracking = True ' AcquireStar needs tracking scope 67: Else => 68: Call SUP.StartSlewJ2000("FocusArea", CT.RightAscension, CT.Declination) ^ 69: Call SUP.WaitForSlew() 70: End If 71: -- end -- 05-May-2017 03:23:58.6: ** Autofocus failed (n=1), will retry ASAP after 0 min. 05-May-2017 03:23:58.6: SelectRunning: No running plans 05-May-2017 03:23:58.6: No pending plans that can be started now. 05-May-2017 03:23:58.6: Dispatcher cycle time: 0.0230013 sec. 05-May-2017 03:24:28.9: ++ Auto Focus ++ 05-May-2017 03:24:29.0: Doing periodic autofocus. 05-May-2017 03:24:29.0: Start special ACP AutoFocus script for scheduler 05-May-2017 03:24:39.0: Sequencer is now active 05-May-2017 03:24:55.9: Sequencer is no longer active 05-May-2017 03:24:55.9: ** Autofocus failed (n=2), will retry ASAP after 5 min. 05-May-2017 03:24:56.1: SelectRunning: No running plans 05-May-2017 03:24:56.1: No pending plans that can be started now. 05-May-2017 03:24:56.1: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 03:25:26.2: SelectRunning: No running plans 05-May-2017 03:25:26.2: No pending plans that can be started now. 05-May-2017 03:25:26.2: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:25:44.9: Dispatcher stopped at 05-May-2017 03:25:44 UTC 05-May-2017 03:25:44.9: **DISPATCHER INTERRUPT LEVEL 1 RECEIVED** 05-May-2017 03:25:47.9: Dispatcher started at 05-May-2017 03:25:47 UTC 05-May-2017 03:25:47.9: Priority: W[0]=0.00 05-May-2017 03:25:47.9: Transit Altitude: W[1]=0.00 05-May-2017 03:25:47.9: Highest Altitude: W[6]=0.00 05-May-2017 03:25:47.9: Lateness: W[5]=0.70 05-May-2017 03:25:47.9: Slew Distance: W[2]=0.00 05-May-2017 03:25:47.9: Retry Count: W[3]=0.20 05-May-2017 03:25:47.9: Meridian Crossing: W[4]=0.30 05-May-2017 03:25:47.9: Obs Conditions: W[7]=0.40 05-May-2017 03:25:47.9: Rising Plan Delay: disabled 05-May-2017 03:25:48.8: ++ Observatory Startup ++ 05-May-2017 03:25:48.8: Start ACP Sequencer's StartupObs script 05-May-2017 03:25:58.8: Sequencer is now active 05-May-2017 03:26:03.9: Sequencer is no longer active 05-May-2017 03:26:03.9: ++ Auto Focus ++ 05-May-2017 03:26:03.9: Doing initial autofocus. 05-May-2017 03:26:03.9: Start special ACP AutoFocus script for scheduler 05-May-2017 03:26:14.0: Sequencer is now active 05-May-2017 03:26:19.1: Sequencer is no longer active 05-May-2017 03:26:19.1: ** Sequencer script "AutoFocusScheduler" failed: 05-May-2017 03:26:19.1: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 68 column 9. Script Context: 65: If Util.Prefs.AutoFocus.UseAcquireStar Then 66: Telescope.Tracking = True ' AcquireStar needs tracking scope 67: Else => 68: Call SUP.StartSlewJ2000("FocusArea", CT.RightAscension, CT.Declination) ^ 69: Call SUP.WaitForSlew() 70: End If 71: -- end -- 05-May-2017 03:26:19.1: ** Autofocus failed (n=1), will retry ASAP after 0 min. 05-May-2017 03:26:19.1: SelectRunning: No running plans 05-May-2017 03:26:19.1: No pending plans that can be started now. 05-May-2017 03:26:19.1: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:26:49.3: ++ Auto Focus ++ 05-May-2017 03:26:49.4: Doing periodic autofocus. 05-May-2017 03:26:49.4: Start special ACP AutoFocus script for scheduler 05-May-2017 03:26:59.4: Sequencer is now active 05-May-2017 03:27:04.6: Sequencer is no longer active 05-May-2017 03:27:04.6: ** Sequencer script "AutoFocusScheduler" failed: 05-May-2017 03:27:04.6: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 68 column 9. Script Context: 65: If Util.Prefs.AutoFocus.UseAcquireStar Then 66: Telescope.Tracking = True ' AcquireStar needs tracking scope 67: Else => 68: Call SUP.StartSlewJ2000("FocusArea", CT.RightAscension, CT.Declination) ^ 69: Call SUP.WaitForSlew() 70: End If 71: -- end -- 05-May-2017 03:27:04.6: ** Autofocus failed (n=2), will retry ASAP after 5 min. 05-May-2017 03:27:04.6: SelectRunning: No running plans 05-May-2017 03:27:04.6: No pending plans that can be started now. 05-May-2017 03:27:04.6: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 03:27:34.8: SelectRunning: No running plans 05-May-2017 03:27:34.8: No pending plans that can be started now. 05-May-2017 03:27:34.8: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:28:05.0: SelectRunning: No running plans 05-May-2017 03:28:05.0: No pending plans that can be started now. 05-May-2017 03:28:05.0: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:28:35.1: SelectRunning: No running plans 05-May-2017 03:28:35.1: No pending plans that can be started now. 05-May-2017 03:28:35.1: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:29:05.9: SelectRunning: No running plans 05-May-2017 03:29:05.9: No pending plans that can be started now. 05-May-2017 03:29:05.9: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 03:29:36.1: SelectRunning: No running plans 05-May-2017 03:29:36.1: No pending plans that can be started now. 05-May-2017 03:29:36.1: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 03:30:06.5: SelectRunning: No running plans 05-May-2017 03:30:06.5: No pending plans that can be started now. 05-May-2017 03:30:06.5: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 03:30:36.6: SelectRunning: No running plans 05-May-2017 03:30:36.6: No pending plans that can be started now. 05-May-2017 03:30:36.6: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 03:31:06.9: SelectRunning: No running plans 05-May-2017 03:31:06.9: No pending plans that can be started now. 05-May-2017 03:31:06.9: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 03:31:37.1: SelectRunning: No running plans 05-May-2017 03:31:37.1: No pending plans that can be started now. 05-May-2017 03:31:37.1: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 03:32:07.6: ++ Auto Focus ++ 05-May-2017 03:32:07.6: Doing periodic autofocus. 05-May-2017 03:32:07.6: Start special ACP AutoFocus script for scheduler 05-May-2017 03:32:17.6: Sequencer is now active 05-May-2017 03:32:22.7: Sequencer is no longer active 05-May-2017 03:32:22.7: ** Sequencer script "AutoFocusScheduler" failed: 05-May-2017 03:32:22.7: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 68 column 9. Script Context: 65: If Util.Prefs.AutoFocus.UseAcquireStar Then 66: Telescope.Tracking = True ' AcquireStar needs tracking scope 67: Else => 68: Call SUP.StartSlewJ2000("FocusArea", CT.RightAscension, CT.Declination) ^ 69: Call SUP.WaitForSlew() 70: End If 71: -- end -- 05-May-2017 03:32:22.7: ** Autofocus failed (n=3), will retry ASAP after 10 min. 05-May-2017 03:32:22.8: SelectRunning: No running plans 05-May-2017 03:32:22.8: No pending plans that can be started now. 05-May-2017 03:32:22.8: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 03:32:52.9: SelectRunning: No running plans 05-May-2017 03:32:52.9: No pending plans that can be started now. 05-May-2017 03:32:52.9: Dispatcher cycle time: 0.0230014 sec. 05-May-2017 03:33:23.6: SelectRunning: No running plans 05-May-2017 03:33:23.6: No pending plans that can be started now. 05-May-2017 03:33:23.6: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 03:33:53.7: SelectRunning: No running plans 05-May-2017 03:33:53.7: No pending plans that can be started now. 05-May-2017 03:33:53.7: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 03:34:23.9: SelectRunning: No running plans 05-May-2017 03:34:23.9: No pending plans that can be started now. 05-May-2017 03:34:23.9: Dispatcher cycle time: 0.0120007 sec. 05-May-2017 03:34:54.1: SelectRunning: No running plans 05-May-2017 03:34:54.1: No pending plans that can be started now. 05-May-2017 03:34:54.1: Dispatcher cycle time: 0.0120007 sec. 05-May-2017 03:35:24.3: SelectRunning: No running plans 05-May-2017 03:35:24.3: No pending plans that can be started now. 05-May-2017 03:35:24.3: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 03:35:54.7: SelectRunning: No running plans 05-May-2017 03:35:54.7: No pending plans that can be started now. 05-May-2017 03:35:54.7: Dispatcher cycle time: 0.0250014 sec. 05-May-2017 03:36:25.2: SelectRunning: No running plans 05-May-2017 03:36:25.2: No pending plans that can be started now. 05-May-2017 03:36:25.2: Dispatcher cycle time: 0.0120007 sec. 05-May-2017 03:36:55.3: SelectRunning: No running plans 05-May-2017 03:36:55.3: No pending plans that can be started now. 05-May-2017 03:36:55.3: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:37:25.5: SelectRunning: No running plans 05-May-2017 03:37:25.5: No pending plans that can be started now. 05-May-2017 03:37:25.5: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:37:55.6: SelectRunning: No running plans 05-May-2017 03:37:55.6: No pending plans that can be started now. 05-May-2017 03:37:55.6: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 03:38:26.0: SelectRunning: No running plans 05-May-2017 03:38:26.0: No pending plans that can be started now. 05-May-2017 03:38:26.0: Dispatcher cycle time: 0.0120007 sec. 05-May-2017 03:38:56.1: SelectRunning: No running plans 05-May-2017 03:38:56.1: No pending plans that can be started now. 05-May-2017 03:38:56.1: Dispatcher cycle time: 0.0270015 sec. 05-May-2017 03:39:26.5: SelectRunning: No running plans 05-May-2017 03:39:26.5: No pending plans that can be started now. 05-May-2017 03:39:26.5: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:39:56.6: SelectRunning: No running plans 05-May-2017 03:39:56.6: No pending plans that can be started now. 05-May-2017 03:39:56.6: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:40:26.8: SelectRunning: No running plans 05-May-2017 03:40:26.8: No pending plans that can be started now. 05-May-2017 03:40:26.8: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 03:40:57.2: SelectRunning: No running plans 05-May-2017 03:40:57.2: No pending plans that can be started now. 05-May-2017 03:40:57.2: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:41:27.3: SelectRunning: No running plans 05-May-2017 03:41:27.3: No pending plans that can be started now. 05-May-2017 03:41:27.3: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:41:57.5: SelectRunning: No running plans 05-May-2017 03:41:57.5: No pending plans that can be started now. 05-May-2017 03:41:57.5: Dispatcher cycle time: 0.0200012 sec. 05-May-2017 03:42:27.6: ++ Auto Focus ++ 05-May-2017 03:42:27.6: Doing periodic autofocus. 05-May-2017 03:42:27.6: Start special ACP AutoFocus script for scheduler 05-May-2017 03:42:37.6: Sequencer is now active 05-May-2017 03:42:42.7: Sequencer is no longer active 05-May-2017 03:42:42.7: ** Sequencer script "AutoFocusScheduler" failed: 05-May-2017 03:42:42.7: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 68 column 9. Script Context: 65: If Util.Prefs.AutoFocus.UseAcquireStar Then 66: Telescope.Tracking = True ' AcquireStar needs tracking scope 67: Else => 68: Call SUP.StartSlewJ2000("FocusArea", CT.RightAscension, CT.Declination) ^ 69: Call SUP.WaitForSlew() 70: End If 71: -- end -- 05-May-2017 03:42:42.7: ** Autofocus failed (n=4), will retry ASAP after 15 min. 05-May-2017 03:42:42.9: SelectRunning: No running plans 05-May-2017 03:42:42.9: No pending plans that can be started now. 05-May-2017 03:42:42.9: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 03:43:13.2: SelectRunning: No running plans 05-May-2017 03:43:13.2: No pending plans that can be started now. 05-May-2017 03:43:13.2: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 03:43:43.6: SelectRunning: No running plans 05-May-2017 03:43:43.6: No pending plans that can be started now. 05-May-2017 03:43:43.6: Dispatcher cycle time: 0.0120007 sec. 05-May-2017 03:44:14.1: SelectRunning: No running plans 05-May-2017 03:44:14.1: No pending plans that can be started now. 05-May-2017 03:44:14.1: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:44:44.2: SelectRunning: No running plans 05-May-2017 03:44:44.2: No pending plans that can be started now. 05-May-2017 03:44:44.2: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 03:45:14.3: SelectRunning: No running plans 05-May-2017 03:45:14.3: No pending plans that can be started now. 05-May-2017 03:45:14.3: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 03:45:44.5: SelectRunning: No running plans 05-May-2017 03:45:44.5: No pending plans that can be started now. 05-May-2017 03:45:44.5: Dispatcher cycle time: 0.0150008 sec. 05-May-2017 03:46:14.7: SelectRunning: No running plans 05-May-2017 03:46:14.7: No pending plans that can be started now. 05-May-2017 03:46:14.7: Dispatcher cycle time: 0.0120007 sec. 05-May-2017 03:46:45.1: SelectRunning: No running plans 05-May-2017 03:46:45.1: No pending plans that can be started now. 05-May-2017 03:46:45.1: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:47:15.6: SelectRunning: No running plans 05-May-2017 03:47:15.6: No pending plans that can be started now. 05-May-2017 03:47:15.6: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:47:45.7: SelectRunning: No running plans 05-May-2017 03:47:45.7: Efficiency: Only one pending plan V0336_Ser, it is the "best" 05-May-2017 03:47:45.8: Dispatcher cycle time: 0.0670039 sec. 05-May-2017 03:47:45.8: Acquire data for Observation V0336_Ser... 05-May-2017 03:47:45.8: (belongs to Project AAVSO_HGUA_Miras_Manual_ver167, Plan V0336_Ser) 05-May-2017 03:47:45.8: Send Observation V0336_Ser to ACP Sequencer 05-May-2017 03:47:55.8: Sequencer is now active 05-May-2017 03:48:00.9: Sequencer is no longer active 05-May-2017 03:48:00.9: ** Sequencer script "AcquireScheduler" failed: 05-May-2017 03:48:00.9: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 05-May-2017 03:48:03.9: Post-job status check done (stat=Running) 05-May-2017 03:48:03.9: ACP ERROR: Run failed due to script error (see ACP run log) 05-May-2017 03:48:03.9: ACP data acquisition failed for Observation V0336_Ser. 05-May-2017 03:48:03.9: (Observation V0336_Ser interrupted by acquisition process failure.) 05-May-2017 03:48:04.4: SelectRunning: No running plans 05-May-2017 03:48:04.4: No pending plans that can be started now. 05-May-2017 03:48:04.4: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:48:35.0: SelectRunning: No running plans 05-May-2017 03:48:35.0: No pending plans that can be started now. 05-May-2017 03:48:35.0: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 03:49:05.2: SelectRunning: No running plans 05-May-2017 03:49:05.2: No pending plans that can be started now. 05-May-2017 03:49:05.2: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 03:49:35.3: SelectRunning: No running plans 05-May-2017 03:49:35.3: No pending plans that can be started now. 05-May-2017 03:49:35.3: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 03:50:05.5: SelectRunning: No running plans 05-May-2017 03:50:05.5: No pending plans that can be started now. 05-May-2017 03:50:05.5: Dispatcher cycle time: 0.017001 sec. 05-May-2017 03:50:35.6: SelectRunning: No running plans 05-May-2017 03:50:35.6: No pending plans that can be started now. 05-May-2017 03:50:35.6: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 03:51:06.2: SelectRunning: No running plans 05-May-2017 03:51:06.2: No pending plans that can be started now. 05-May-2017 03:51:06.2: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 03:51:36.9: SelectRunning: No running plans 05-May-2017 03:51:36.9: No pending plans that can be started now. 05-May-2017 03:51:36.9: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 03:52:07.1: SelectRunning: No running plans 05-May-2017 03:52:07.1: No pending plans that can be started now. 05-May-2017 03:52:07.1: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 03:52:37.3: SelectRunning: No running plans 05-May-2017 03:52:37.3: No pending plans that can be started now. 05-May-2017 03:52:37.3: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:53:07.5: SelectRunning: No running plans 05-May-2017 03:53:07.5: No pending plans that can be started now. 05-May-2017 03:53:07.5: Dispatcher cycle time: 0.0170009 sec. 05-May-2017 03:53:37.8: SelectRunning: No running plans 05-May-2017 03:53:37.8: No pending plans that can be started now. 05-May-2017 03:53:37.8: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:54:07.9: SelectRunning: No running plans 05-May-2017 03:54:07.9: No pending plans that can be started now. 05-May-2017 03:54:07.9: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 03:54:38.6: SelectRunning: No running plans 05-May-2017 03:54:38.6: No pending plans that can be started now. 05-May-2017 03:54:38.6: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 03:55:08.7: SelectRunning: No running plans 05-May-2017 03:55:08.7: No pending plans that can be started now. 05-May-2017 03:55:08.7: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:55:38.8: SelectRunning: No running plans 05-May-2017 03:55:38.8: No pending plans that can be started now. 05-May-2017 03:55:38.8: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 03:56:09.0: SelectRunning: No running plans 05-May-2017 03:56:09.0: No pending plans that can be started now. 05-May-2017 03:56:09.0: Dispatcher cycle time: 0.0290016 sec. 05-May-2017 03:56:39.2: SelectRunning: No running plans 05-May-2017 03:56:39.2: No pending plans that can be started now. 05-May-2017 03:56:39.2: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:57:09.9: SelectRunning: No running plans 05-May-2017 03:57:09.9: No pending plans that can be started now. 05-May-2017 03:57:09.9: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:57:40.6: SelectRunning: No running plans 05-May-2017 03:57:40.6: No pending plans that can be started now. 05-May-2017 03:57:40.6: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 03:58:10.7: ++ Auto Focus ++ 05-May-2017 03:58:10.7: Doing periodic autofocus. 05-May-2017 03:58:10.7: Start special ACP AutoFocus script for scheduler 05-May-2017 03:58:20.7: Sequencer is now active 05-May-2017 03:58:25.7: Sequencer is no longer active 05-May-2017 03:58:25.7: ** Sequencer script "AutoFocusScheduler" failed: 05-May-2017 03:58:25.7: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 68 column 9. Script Context: 65: If Util.Prefs.AutoFocus.UseAcquireStar Then 66: Telescope.Tracking = True ' AcquireStar needs tracking scope 67: Else => 68: Call SUP.StartSlewJ2000("FocusArea", CT.RightAscension, CT.Declination) ^ 69: Call SUP.WaitForSlew() 70: End If 71: -- end -- 05-May-2017 03:58:25.7: ** Autofocus failed (n=5), will retry ASAP after 20 min. 05-May-2017 03:58:25.8: SelectRunning: No running plans 05-May-2017 03:58:25.8: No pending plans that can be started now. 05-May-2017 03:58:25.8: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 03:58:56.0: SelectRunning: No running plans 05-May-2017 03:58:56.0: No pending plans that can be started now. 05-May-2017 03:58:56.0: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 03:59:26.2: SelectRunning: No running plans 05-May-2017 03:59:26.2: No pending plans that can be started now. 05-May-2017 03:59:26.2: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 03:59:57.2: SelectRunning: No running plans 05-May-2017 03:59:57.2: No pending plans that can be started now. 05-May-2017 03:59:57.2: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 04:00:27.4: SelectRunning: No running plans 05-May-2017 04:00:27.4: No pending plans that can be started now. 05-May-2017 04:00:27.4: Dispatcher cycle time: 0.0120007 sec. 05-May-2017 04:00:57.8: SelectRunning: No running plans 05-May-2017 04:00:57.8: No pending plans that can be started now. 05-May-2017 04:00:57.8: Dispatcher cycle time: 0.0150008 sec. 05-May-2017 04:01:28.0: SelectRunning: No running plans 05-May-2017 04:01:28.0: No pending plans that can be started now. 05-May-2017 04:01:28.0: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 04:01:58.2: SelectRunning: No running plans 05-May-2017 04:01:58.2: No pending plans that can be started now. 05-May-2017 04:01:58.2: Dispatcher cycle time: 0.0120007 sec. 05-May-2017 04:02:28.7: SelectRunning: No running plans 05-May-2017 04:02:28.7: No pending plans that can be started now. 05-May-2017 04:02:28.7: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 04:02:58.8: SelectRunning: No running plans 05-May-2017 04:02:58.8: No pending plans that can be started now. 05-May-2017 04:02:58.8: Dispatcher cycle time: 0.0150009 sec. 05-May-2017 04:03:29.5: SelectRunning: No running plans 05-May-2017 04:03:29.5: No pending plans that can be started now. 05-May-2017 04:03:29.5: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 04:03:59.9: SelectRunning: No running plans 05-May-2017 04:03:59.9: No pending plans that can be started now. 05-May-2017 04:03:59.9: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 04:04:30.0: SelectRunning: No running plans 05-May-2017 04:04:30.0: No pending plans that can be started now. 05-May-2017 04:04:30.0: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 04:05:00.1: SelectRunning: No running plans 05-May-2017 04:05:00.1: No pending plans that can be started now. 05-May-2017 04:05:00.1: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 04:05:30.4: SelectRunning: No running plans 05-May-2017 04:05:30.4: No pending plans that can be started now. 05-May-2017 04:05:30.4: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 04:06:00.6: SelectRunning: No running plans 05-May-2017 04:06:00.6: No pending plans that can be started now. 05-May-2017 04:06:00.6: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 04:06:30.7: SelectRunning: No running plans 05-May-2017 04:06:30.7: No pending plans that can be started now. 05-May-2017 04:06:30.7: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 04:07:01.6: SelectRunning: No running plans 05-May-2017 04:07:01.6: No pending plans that can be started now. 05-May-2017 04:07:01.6: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 04:07:31.8: SelectRunning: No running plans 05-May-2017 04:07:31.8: No pending plans that can be started now. 05-May-2017 04:07:31.8: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 04:08:01.9: SelectRunning: No running plans 05-May-2017 04:08:01.9: No pending plans that can be started now. 05-May-2017 04:08:01.9: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 04:08:32.0: SelectRunning: No running plans 05-May-2017 04:08:32.0: No pending plans that can be started now. 05-May-2017 04:08:32.0: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 04:09:02.6: SelectRunning: No running plans 05-May-2017 04:09:02.6: No pending plans that can be started now. 05-May-2017 04:09:02.6: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 04:09:32.8: SelectRunning: No running plans 05-May-2017 04:09:32.8: No pending plans that can be started now. 05-May-2017 04:09:32.8: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 04:10:03.0: SelectRunning: No running plans 05-May-2017 04:10:03.0: No pending plans that can be started now. 05-May-2017 04:10:03.0: Dispatcher cycle time: 0.0120007 sec. 05-May-2017 04:10:33.1: SelectRunning: No running plans 05-May-2017 04:10:33.1: No pending plans that can be started now. 05-May-2017 04:10:33.1: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 04:11:03.2: SelectRunning: No running plans 05-May-2017 04:11:03.2: No pending plans that can be started now. 05-May-2017 04:11:03.2: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 04:11:33.8: SelectRunning: No running plans 05-May-2017 04:11:33.8: No pending plans that can be started now. 05-May-2017 04:11:33.8: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 04:12:04.1: SelectRunning: No running plans 05-May-2017 04:12:04.1: No pending plans that can be started now. 05-May-2017 04:12:04.1: Dispatcher cycle time: 0.0120006 sec. 05-May-2017 04:12:34.2: SelectRunning: No running plans 05-May-2017 04:12:34.2: No pending plans that can be started now. 05-May-2017 04:12:34.2: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 04:13:04.4: SelectRunning: No running plans 05-May-2017 04:13:04.4: No pending plans that can be started now. 05-May-2017 04:13:04.4: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 04:13:34.7: SelectRunning: No running plans 05-May-2017 04:13:34.7: No pending plans that can be started now. 05-May-2017 04:13:34.7: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 04:14:04.9: SelectRunning: No running plans 05-May-2017 04:14:04.9: No pending plans that can be started now. 05-May-2017 04:14:04.9: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 04:14:35.0: SelectRunning: No running plans 05-May-2017 04:14:35.0: No pending plans that can be started now. 05-May-2017 04:14:35.0: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 04:15:05.3: SelectRunning: No running plans 05-May-2017 04:15:05.3: No pending plans that can be started now. 05-May-2017 04:15:05.3: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 04:15:35.4: SelectRunning: No running plans 05-May-2017 04:15:35.4: No pending plans that can be started now. 05-May-2017 04:15:35.4: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 04:16:05.7: SelectRunning: No running plans 05-May-2017 04:16:05.7: No pending plans that can be started now. 05-May-2017 04:16:05.7: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 04:16:35.9: SelectRunning: No running plans 05-May-2017 04:16:35.9: No pending plans that can be started now. 05-May-2017 04:16:35.9: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 04:17:06.4: SelectRunning: No running plans 05-May-2017 04:17:06.4: No pending plans that can be started now. 05-May-2017 04:17:06.4: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 04:17:36.8: SelectRunning: No running plans 05-May-2017 04:17:36.8: No pending plans that can be started now. 05-May-2017 04:17:36.8: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 04:18:06.9: SelectRunning: No running plans 05-May-2017 04:18:06.9: No pending plans that can be started now. 05-May-2017 04:18:06.9: Dispatcher cycle time: 0.0120007 sec. 05-May-2017 04:18:37.3: ++ Auto Focus ++ 05-May-2017 04:18:37.3: Doing periodic autofocus. 05-May-2017 04:18:37.3: Start special ACP AutoFocus script for scheduler 05-May-2017 04:18:47.3: Sequencer is now active 05-May-2017 04:18:52.3: Sequencer is no longer active 05-May-2017 04:18:52.3: ** Sequencer script "AutoFocusScheduler" failed: 05-May-2017 04:18:52.3: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 68 column 9. Script Context: 65: If Util.Prefs.AutoFocus.UseAcquireStar Then 66: Telescope.Tracking = True ' AcquireStar needs tracking scope 67: Else => 68: Call SUP.StartSlewJ2000("FocusArea", CT.RightAscension, CT.Declination) ^ 69: Call SUP.WaitForSlew() 70: End If 71: -- end -- 05-May-2017 04:18:52.3: ** Autofocus failed (n=6), will retry ASAP after 20 min. 05-May-2017 04:18:52.3: SelectRunning: No running plans 05-May-2017 04:18:52.3: No pending plans that can be started now. 05-May-2017 04:18:52.3: Dispatcher cycle time: 0.0150009 sec. 05-May-2017 04:19:22.8: SelectRunning: No running plans 05-May-2017 04:19:22.8: No pending plans that can be started now. 05-May-2017 04:19:22.8: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 04:19:53.0: SelectRunning: No running plans 05-May-2017 04:19:53.0: No pending plans that can be started now. 05-May-2017 04:19:53.0: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 04:20:23.1: SelectRunning: No running plans 05-May-2017 04:20:23.1: No pending plans that can be started now. 05-May-2017 04:20:23.1: Dispatcher cycle time: 0.0280016 sec. 05-May-2017 04:20:53.6: SelectRunning: No running plans 05-May-2017 04:20:53.6: No pending plans that can be started now. 05-May-2017 04:20:53.6: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 04:21:23.7: SelectRunning: No running plans 05-May-2017 04:21:23.7: No pending plans that can be started now. 05-May-2017 04:21:23.7: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 04:21:54.5: SelectRunning: No running plans 05-May-2017 04:21:54.5: No pending plans that can be started now. 05-May-2017 04:21:54.5: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 04:22:25.0: SelectRunning: No running plans 05-May-2017 04:22:25.0: No pending plans that can be started now. 05-May-2017 04:22:25.0: Dispatcher cycle time: 0.0130007 sec. 05-May-2017 04:22:55.7: SelectRunning: No running plans 05-May-2017 04:22:55.7: No pending plans that can be started now. 05-May-2017 04:22:55.7: Dispatcher cycle time: 0.0140008 sec. 05-May-2017 04:23:26.8: SelectRunning: No running plans 05-May-2017 04:23:26.8: No pending plans that can be started now. 05-May-2017 04:23:26.8: Dispatcher cycle time: 0.0210012 sec. 05-May-2017 04:23:57.2: SelectRunning: No running plans 05-May-2017 04:23:57.2: No pending plans that can be started now. 05-May-2017 04:23:57.2: Dispatcher cycle time: 0.0120007 sec. 05-May-2017 04:24:27.5: SelectRunning: No running plans 05-May-2017 04:24:27.5: No pending plans that can be started now. 05-May-2017 04:24:27.5: Dispatcher cycle time: 0.0130008 sec. 05-May-2017 04:24:57.6: SelectRunning: No running plans 05-May-2017 04:24:57.6: No pending plans that can be started now. 05-May-2017 04:24:57.6: Dispatcher cycle time: 0.0120007 sec. 05-May-2017 04:25:10.4: Dispatcher stopped at 05-May-2017 04:25:10 UTC 05-May-2017 04:25:10.4: **DISPATCHER INTERRUPT LEVEL 1 RECEIVED** 05-May-2017 04:25:14.4: Requested shutdown of scheduler 05-May-2017 04:25:14.5: Run statistics: 05-May-2017 04:25:14.5: Observations: 54 05-May-2017 04:25:14.5: Considered: 16 05-May-2017 04:25:14.5: Completed: 0 05-May-2017 04:25:14.5: Skipped: 0 05-May-2017 04:25:14.5: Never Eligible: 38 05-May-2017 04:25:14.5: Failed: 16 05-May-2017 04:25:14.5: Shutter-Open efficiency: 0.00% 05-May-2017 04:25:14.5: Overall Efficiency: 6.64% 05-May-2017 04:25:14.5: Release ACP sequencer Log closed at Fri, May 05 2017 04:25:16 UTC (actual time)