Log opened at Tue, Mar 24 2015 06:08:38 UTC (actual time) Current log level is Verbose Scheduler version 3.5.3 Multi-user license: Arne Henden 24-Mar-2015 06:08:38.3: Simulated clock initialized at 24-Mar-2015 06:08:38 UTC 24-Mar-2015 06:08:38.3: Loaded Constraint plugin AirMass 24-Mar-2015 06:08:38.3: Loaded Constraint plugin AirmassRange 24-Mar-2015 06:08:38.3: Loaded Constraint plugin Horizon 24-Mar-2015 06:08:38.3: Loaded Constraint plugin HourAngle 24-Mar-2015 06:08:38.3: Loaded Constraint plugin MoonAvoid 24-Mar-2015 06:08:38.3: Loaded Constraint plugin MoonDown 24-Mar-2015 06:08:38.3: Loaded Constraint plugin SkyCondition 24-Mar-2015 06:08:38.3: Loaded Constraint plugin TimeRange 24-Mar-2015 06:08:38.9: 19 plans are now pending. 24-Mar-2015 06:08:38.9: Attach ACP sequencer 24-Mar-2015 06:08:45.6: Weather successfully connected. Wait for valid data... 24-Mar-2015 06:10:10.2: Dispatcher started at 24-Mar-2015 06:10:10 UTC 24-Mar-2015 06:10:10.2: Priority: W[0]=1.00 24-Mar-2015 06:10:10.2: Transit Altitude: W[1]=0.70 24-Mar-2015 06:10:10.2: Highest Altitude: W[6]=0.00 24-Mar-2015 06:10:10.2: Lateness: W[5]=0.00 24-Mar-2015 06:10:10.2: Slew Distance: W[2]=0.30 24-Mar-2015 06:10:10.2: Retry Count: W[3]=0.20 24-Mar-2015 06:10:10.2: Meridian Crossing: W[4]=0.30 24-Mar-2015 06:10:10.2: Obs Conditions: W[7]=0.40 24-Mar-2015 06:10:10.2: Rising Plan Delay: disabled 24-Mar-2015 06:10:15.4: ++ Observatory Startup ++ 24-Mar-2015 06:10:15.4: Start ACP Sequencer's StartupObs script 24-Mar-2015 06:10:55.1: Open the observatory dome/roof 24-Mar-2015 06:12:08.8: ++ Auto Focus ++ 24-Mar-2015 06:12:08.8: Doing initial autofocus. 24-Mar-2015 06:12:08.8: Start special ACP AutoFocus script for scheduler 24-Mar-2015 06:12:24.5: ** Sequencer script "AutoFocusScheduler" failed: 24-Mar-2015 06:12:24.5: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 68 column 9. Script Context: 65: If Util.Prefs.AutoFocus.UseAcquireStar Then 66: Telescope.Tracking = True ' AcquireStar needs tracking scope 67: Else => 68: Call SUP.StartSlewJ2000("FocusArea", CT.RightAscension, CT.Declination) ^ 69: Call SUP.WaitForSlew() 70: End If 71: -- end -- 24-Mar-2015 06:12:24.5: ** Autofocus failed (n=1), will retry ASAP after 0 min. 24-Mar-2015 06:12:26.9: Plan MP_Gem has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan KH_15D has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan V1184_Tau has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan NGC_2438 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan V849_Her has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan V1404_Cyg has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan RZ_Leo has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan SDSS073224 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan FG_Sge has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan LX_Cyg has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan RR_Vir has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan S_Lyn has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan ST_Aur has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan ST_Lyr has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan ST_Sge has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan SW_Aql has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan SY_CMa has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan T_CMi has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan TT_Mon has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan TU_Aql has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan UU_Lyr has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan VV_Gem has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan WX_CMi has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan WZ_Lyr has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan X_Dra has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan YZ_Vul has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan Z_Lyr has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan Z_Tau has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan NGC_2419 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan Pal_3 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan Pal_4 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan NGC_4147 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan NGC_5024 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan NGC_5053 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan NGC_5272 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan NGC_5466 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan NGC_5634 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan Pal_5 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan NGC_5904 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan NGC_6171 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan NGC_6205 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan NGC_6229 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan NGC_6218 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan NGC_6235 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan NGC_6254 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan NGC_6341 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan NGC_6366 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan NGC_6402 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan NGC_6426 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan NGC_6535 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan IC_1276 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan NGC_6712 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan NGC_6760 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan NGC_6779 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan Pal_10 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan NGC_6838 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan M56 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan V339_Del_TMO61 has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan V838_Mon has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:26.9: Plan V841_Oph has Monitor Mode. Time to resubmit it. 24-Mar-2015 06:12:27.6: Dispatcher cycle time: 1.2948023 sec. 24-Mar-2015 06:12:27.6: Acquire data for Observation SDSS073224... 24-Mar-2015 06:12:27.6: (belongs to Project AGN, Plan SDSS073224) 24-Mar-2015 06:12:27.6: Send Observation SDSS073224 to ACP Sequencer 24-Mar-2015 06:12:42.6: ** Sequencer script "AcquireScheduler" failed: 24-Mar-2015 06:12:42.6: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 24-Mar-2015 06:12:45.7: ACP ERROR: Run failed due to script error (see ACP run log) 24-Mar-2015 06:12:45.7: ACP data acquisition failed for Observation SDSS073224. 24-Mar-2015 06:12:45.7: (Observation SDSS073224 interrupted by acquisition process failure.) 24-Mar-2015 06:12:48.8: ++ Auto Focus ++ 24-Mar-2015 06:12:48.9: Doing periodic autofocus. 24-Mar-2015 06:12:48.9: Start special ACP AutoFocus script for scheduler 24-Mar-2015 06:13:05.6: ** Sequencer script "AutoFocusScheduler" failed: 24-Mar-2015 06:13:05.6: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 68 column 9. Script Context: 65: If Util.Prefs.AutoFocus.UseAcquireStar Then 66: Telescope.Tracking = True ' AcquireStar needs tracking scope 67: Else => 68: Call SUP.StartSlewJ2000("FocusArea", CT.RightAscension, CT.Declination) ^ 69: Call SUP.WaitForSlew() 70: End If 71: -- end -- 24-Mar-2015 06:13:05.6: ** Autofocus failed (n=2), will retry ASAP after 5 min. 24-Mar-2015 06:13:08.1: Dispatcher cycle time: 0.3588006 sec. 24-Mar-2015 06:13:08.1: Acquire data for Observation RZ_Leo... 24-Mar-2015 06:13:08.1: (belongs to Project Walker, Plan RZ_Leo) 24-Mar-2015 06:13:08.1: Send Observation RZ_Leo to ACP Sequencer 24-Mar-2015 06:13:30.1: ** Sequencer script "AcquireScheduler" failed: 24-Mar-2015 06:13:30.1: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 24-Mar-2015 06:13:33.2: ACP ERROR: Run failed due to script error (see ACP run log) 24-Mar-2015 06:13:33.2: ACP data acquisition failed for Observation RZ_Leo. 24-Mar-2015 06:13:33.2: (Observation RZ_Leo interrupted by acquisition process failure.) 24-Mar-2015 06:13:43.9: Dispatcher cycle time: 0.5148009 sec. 24-Mar-2015 06:13:43.9: Acquire data for Observation Pal_3... 24-Mar-2015 06:13:43.9: (belongs to Project Welch_gc, Plan Pal_3) 24-Mar-2015 06:13:43.9: Send Observation Pal_3 to ACP Sequencer 24-Mar-2015 06:13:59.2: ** Sequencer script "AcquireScheduler" failed: 24-Mar-2015 06:13:59.2: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 24-Mar-2015 06:14:02.3: ACP ERROR: Run failed due to script error (see ACP run log) 24-Mar-2015 06:14:02.3: ACP data acquisition failed for Observation Pal_3. 24-Mar-2015 06:14:02.3: (Observation Pal_3 interrupted by acquisition process failure.) 24-Mar-2015 06:14:06.3: Dispatcher cycle time: 0.1560003 sec. 24-Mar-2015 06:14:06.3: Acquire data for Observation S_Lyn... 24-Mar-2015 06:14:06.3: (belongs to Project Mogul_Mira, Plan S_Lyn) 24-Mar-2015 06:14:06.3: Send Observation S_Lyn to ACP Sequencer 24-Mar-2015 06:14:21.6: ** Sequencer script "AcquireScheduler" failed: 24-Mar-2015 06:14:21.6: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 24-Mar-2015 06:14:24.7: ACP ERROR: Run failed due to script error (see ACP run log) 24-Mar-2015 06:14:24.7: ACP data acquisition failed for Observation S_Lyn. 24-Mar-2015 06:14:24.7: (Observation S_Lyn interrupted by acquisition process failure.) 24-Mar-2015 06:14:33.9: Dispatcher cycle time: 0.4836008 sec. 24-Mar-2015 06:14:33.9: Acquire data for Observation NGC_2419... 24-Mar-2015 06:14:33.9: (belongs to Project Welch_gc, Plan NGC_2419) 24-Mar-2015 06:14:33.9: Send Observation NGC_2419 to ACP Sequencer 24-Mar-2015 06:16:59.6: Dispatcher stopped at 24-Mar-2015 06:16:59 UTC 24-Mar-2015 06:16:59.6: **DISPATCHER INTERRUPT LEVEL 1 RECEIVED** 24-Mar-2015 06:17:08.3: ** Sequencer script "AcquireScheduler" failed: 24-Mar-2015 06:17:08.3: **Script Error** Source: ACP Message: The script was aborted. at line 870 column 9. Script Context: 867: ' OBS.PA doesn't change regardless of target type. 868: ' 869: slewDist = StartSlewToTarget(True) ' Handles various target types => 870: Call SUP.WaitForSlew() ' Wait for the slew to complete. ^ 871: If SUP.HaveRotator Then SUP.WaitForRotator ' And for rotator slew 872: Else 873: slewDist = StartSlewToTarget(False) ' Kludge for simulator and no slew -- end -- 24-Mar-2015 06:17:11.4: RUN FAILED: Scheduler was stopped during run 24-Mar-2015 06:17:11.4: ACP data acquisition failed for Observation NGC_2419. 24-Mar-2015 06:17:11.4: (Observation NGC_2419 interrupted by operator or system.) 24-Mar-2015 06:17:14.5: Dispatcher started at 24-Mar-2015 06:17:14 UTC 24-Mar-2015 06:17:14.5: Priority: W[0]=1.00 24-Mar-2015 06:17:14.5: Transit Altitude: W[1]=0.70 24-Mar-2015 06:17:14.5: Highest Altitude: W[6]=0.00 24-Mar-2015 06:17:14.5: Lateness: W[5]=0.00 24-Mar-2015 06:17:14.5: Slew Distance: W[2]=0.30 24-Mar-2015 06:17:14.5: Retry Count: W[3]=0.20 24-Mar-2015 06:17:14.5: Meridian Crossing: W[4]=0.30 24-Mar-2015 06:17:14.5: Obs Conditions: W[7]=0.40 24-Mar-2015 06:17:14.5: Rising Plan Delay: disabled 24-Mar-2015 06:17:14.9: ++ Observatory Startup ++ 24-Mar-2015 06:17:14.9: Start ACP Sequencer's StartupObs script 24-Mar-2015 06:17:31.8: ++ Auto Focus ++ 24-Mar-2015 06:17:31.8: Doing initial autofocus. 24-Mar-2015 06:17:31.8: Start special ACP AutoFocus script for scheduler 24-Mar-2015 06:25:42.4: ** Sequencer script "AutoFocusScheduler" failed: 24-Mar-2015 06:25:42.4: **Script Error (Tracking has been stopped)** Source: FocusMax Message: Focuser link failed at line 72 column 2. Script Context: 69: Call SUP.WaitForSlew() 70: End If 71: => 72: If Not SUP.AutoFocus(CT.RightAscension, CT.Declination) Then ^ 73: Console.PrintLine "***AutoFocus failed." 74: End If 75: -- end -- 24-Mar-2015 06:25:42.4: ** Autofocus failed (n=1), will retry ASAP after 0 min. 24-Mar-2015 06:25:45.0: Dispatcher cycle time: 0.4680009 sec. 24-Mar-2015 06:25:45.0: Acquire data for Observation Pal_4... 24-Mar-2015 06:25:45.0: (belongs to Project Welch_gc, Plan Pal_4) 24-Mar-2015 06:25:45.0: Send Observation Pal_4 to ACP Sequencer 24-Mar-2015 06:26:45.4: ACP data acquisition failed for Observation Pal_4. 24-Mar-2015 06:26:45.4: (Observation Pal_4 interrupted by acquisition process failure.) 24-Mar-2015 06:26:51.5: ++ Auto Focus ++ 24-Mar-2015 06:26:51.5: Doing periodic autofocus. 24-Mar-2015 06:26:51.5: Start special ACP AutoFocus script for scheduler 24-Mar-2015 06:28:06.3: ** Sequencer script "AutoFocusScheduler" failed: 24-Mar-2015 06:28:06.3: **Script Error (Tracking has been stopped)** Source: FocusMax Message: Focuser link failed at line 72 column 2. Script Context: 69: Call SUP.WaitForSlew() 70: End If 71: => 72: If Not SUP.AutoFocus(CT.RightAscension, CT.Declination) Then ^ 73: Console.PrintLine "***AutoFocus failed." 74: End If 75: -- end -- 24-Mar-2015 06:28:06.3: ** Autofocus failed (n=2), will retry ASAP after 5 min. 24-Mar-2015 06:28:07.5: Dispatcher cycle time: 0.1560003 sec. 24-Mar-2015 06:28:07.5: Acquire data for Observation NGC_4147... 24-Mar-2015 06:28:07.5: (belongs to Project Welch_gc, Plan NGC_4147) 24-Mar-2015 06:28:07.8: Send Observation NGC_4147 to ACP Sequencer 24-Mar-2015 06:28:57.5: ACP data acquisition failed for Observation NGC_4147. 24-Mar-2015 06:28:57.5: (Observation NGC_4147 interrupted by acquisition process failure.) 24-Mar-2015 06:29:07.9: Dispatcher cycle time: 0.1092002 sec. 24-Mar-2015 06:29:07.9: Acquire data for Observation NGC_5024... 24-Mar-2015 06:29:07.9: (belongs to Project Welch_gc, Plan NGC_5024) 24-Mar-2015 06:29:08.2: Send Observation NGC_5024 to ACP Sequencer 24-Mar-2015 06:29:57.0: ACP data acquisition failed for Observation NGC_5024. 24-Mar-2015 06:29:57.0: (Observation NGC_5024 interrupted by acquisition process failure.) 24-Mar-2015 06:30:04.7: Dispatcher cycle time: 0.0936002 sec. 24-Mar-2015 06:30:04.7: Acquire data for Observation NGC_5053... 24-Mar-2015 06:30:04.8: (belongs to Project Welch_gc, Plan NGC_5053) 24-Mar-2015 06:30:04.8: Send Observation NGC_5053 to ACP Sequencer 24-Mar-2015 06:30:37.5: ACP data acquisition failed for Observation NGC_5053. 24-Mar-2015 06:30:37.5: (Observation NGC_5053 interrupted by acquisition process failure.) 24-Mar-2015 06:30:48.4: Dispatcher cycle time: 0.1092002 sec. 24-Mar-2015 06:30:48.4: Acquire data for Observation NGC_5272... 24-Mar-2015 06:30:48.4: (belongs to Project Welch_gc, Plan NGC_5272) 24-Mar-2015 06:30:48.4: Send Observation NGC_5272 to ACP Sequencer 24-Mar-2015 06:31:23.2: ACP data acquisition failed for Observation NGC_5272. 24-Mar-2015 06:31:23.2: (Observation NGC_5272 interrupted by acquisition process failure.) 24-Mar-2015 06:31:28.4: Dispatcher cycle time: 0.0936001 sec. 24-Mar-2015 06:31:28.4: Acquire data for Observation RR_Vir... 24-Mar-2015 06:31:28.4: (belongs to Project Mogul_Mira, Plan RR_Vir) 24-Mar-2015 06:31:28.5: Send Observation RR_Vir to ACP Sequencer 24-Mar-2015 06:41:25.8: ACP data acquisition failed for Observation RR_Vir. 24-Mar-2015 06:41:25.8: (Observation RR_Vir interrupted by acquisition process failure.) 24-Mar-2015 06:41:26.1: ++ Auto Focus ++ 24-Mar-2015 06:41:26.2: Doing periodic autofocus. 24-Mar-2015 06:41:26.2: Start special ACP AutoFocus script for scheduler 24-Mar-2015 06:42:51.9: ** Sequencer script "AutoFocusScheduler" failed: 24-Mar-2015 06:42:51.9: **Script Error (Tracking has been stopped)** Source: FocusMax Message: Focuser link failed at line 72 column 2. Script Context: 69: Call SUP.WaitForSlew() 70: End If 71: => 72: If Not SUP.AutoFocus(CT.RightAscension, CT.Declination) Then ^ 73: Console.PrintLine "***AutoFocus failed." 74: End If 75: -- end -- 24-Mar-2015 06:42:51.9: ** Autofocus failed (n=3), will retry ASAP after 10 min. 24-Mar-2015 06:42:52.5: Dispatcher cycle time: 0.0936002 sec. 24-Mar-2015 06:42:52.5: Acquire data for Observation NGC_5466... 24-Mar-2015 06:42:52.5: (belongs to Project Welch_gc, Plan NGC_5466) 24-Mar-2015 06:42:52.5: Send Observation NGC_5466 to ACP Sequencer 24-Mar-2015 06:44:11.0: ACP data acquisition failed for Observation NGC_5466. 24-Mar-2015 06:44:11.0: (Observation NGC_5466 interrupted by acquisition process failure.) 24-Mar-2015 06:44:22.0: Dispatcher cycle time: 0.4368007 sec. 24-Mar-2015 06:44:22.0: Acquire data for Observation NGC_5634... 24-Mar-2015 06:44:22.0: (belongs to Project Welch_gc, Plan NGC_5634) 24-Mar-2015 06:44:22.0: Send Observation NGC_5634 to ACP Sequencer 24-Mar-2015 06:45:14.2: ACP data acquisition failed for Observation NGC_5634. 24-Mar-2015 06:45:14.2: (Observation NGC_5634 interrupted by acquisition process failure.) 24-Mar-2015 06:45:24.1: Dispatcher cycle time: 0.0780001 sec. 24-Mar-2015 06:45:24.1: Acquire data for Observation Pal_5... 24-Mar-2015 06:45:24.1: (belongs to Project Welch_gc, Plan Pal_5) 24-Mar-2015 06:45:24.1: Send Observation Pal_5 to ACP Sequencer 24-Mar-2015 06:46:06.4: ACP data acquisition failed for Observation Pal_5. 24-Mar-2015 06:46:06.4: (Observation Pal_5 interrupted by acquisition process failure.) 24-Mar-2015 06:46:13.5: Dispatcher cycle time: 0.0780001 sec. 24-Mar-2015 06:46:13.5: Acquire data for Observation NGC_5904... 24-Mar-2015 06:46:13.5: (belongs to Project Welch_gc, Plan NGC_5904) 24-Mar-2015 06:46:13.5: Send Observation NGC_5904 to ACP Sequencer 24-Mar-2015 06:46:47.8: ACP data acquisition failed for Observation NGC_5904. 24-Mar-2015 06:46:47.8: (Observation NGC_5904 interrupted by acquisition process failure.) 24-Mar-2015 06:46:53.5: Dispatcher cycle time: 0.0624001 sec. 24-Mar-2015 06:46:53.5: Acquire data for Observation NGC_6229... 24-Mar-2015 06:46:53.5: (belongs to Project Welch_gc, Plan NGC_6229) 24-Mar-2015 06:46:53.8: Send Observation NGC_6229 to ACP Sequencer 24-Mar-2015 06:47:54.0: ACP data acquisition failed for Observation NGC_6229. 24-Mar-2015 06:47:54.0: (Observation NGC_6229 interrupted by acquisition process failure.) 24-Mar-2015 06:48:02.8: Dispatcher cycle time: 0.0312001 sec. 24-Mar-2015 06:48:02.8: Acquire data for Observation NGC_6205... 24-Mar-2015 06:48:02.9: (belongs to Project Welch_gc, Plan NGC_6205) 24-Mar-2015 06:48:02.9: Send Observation NGC_6205 to ACP Sequencer 24-Mar-2015 06:48:39.6: ACP data acquisition failed for Observation NGC_6205. 24-Mar-2015 06:48:39.6: (Observation NGC_6205 interrupted by acquisition process failure.) 24-Mar-2015 06:53:06.4: ++ Auto Focus ++ 24-Mar-2015 06:53:06.4: Doing periodic autofocus. 24-Mar-2015 06:53:06.4: Start special ACP AutoFocus script for scheduler 24-Mar-2015 06:55:38.3: ** Sequencer script "AutoFocusScheduler" failed: 24-Mar-2015 06:55:38.3: **Script Error (Tracking has been stopped)** Source: FocusMax Message: Focuser link failed at line 72 column 2. Script Context: 69: Call SUP.WaitForSlew() 70: End If 71: => 72: If Not SUP.AutoFocus(CT.RightAscension, CT.Declination) Then ^ 73: Console.PrintLine "***AutoFocus failed." 74: End If 75: -- end -- 24-Mar-2015 06:55:38.3: ** Autofocus failed (n=4), will retry ASAP after 15 min. 24-Mar-2015 07:08:10.6: Dispatcher cycle time: 0.0312001 sec. 24-Mar-2015 07:08:10.6: Acquire data for Observation NGC_6341... 24-Mar-2015 07:08:10.6: (belongs to Project Welch_gc, Plan NGC_6341) 24-Mar-2015 07:08:10.6: Send Observation NGC_6341 to ACP Sequencer 24-Mar-2015 07:09:57.3: ACP data acquisition failed for Observation NGC_6341. 24-Mar-2015 07:09:57.3: (Observation NGC_6341 interrupted by acquisition process failure.) 24-Mar-2015 07:10:41.8: ++ Auto Focus ++ 24-Mar-2015 07:10:41.8: Doing periodic autofocus. 24-Mar-2015 07:10:41.8: Start special ACP AutoFocus script for scheduler 24-Mar-2015 07:12:50.3: ** Sequencer script "AutoFocusScheduler" failed: 24-Mar-2015 07:12:50.3: **Script Error (Tracking has been stopped)** Source: FocusMax Message: Focuser link failed at line 72 column 2. Script Context: 69: Call SUP.WaitForSlew() 70: End If 71: => 72: If Not SUP.AutoFocus(CT.RightAscension, CT.Declination) Then ^ 73: Console.PrintLine "***AutoFocus failed." 74: End If 75: -- end -- 24-Mar-2015 07:12:50.3: ** Autofocus failed (n=5), will retry ASAP after 20 min. 24-Mar-2015 07:14:40.6: Dispatcher cycle time: 0.0624001 sec. 24-Mar-2015 07:14:40.6: Acquire data for Observation X_Dra... 24-Mar-2015 07:14:40.6: (belongs to Project Mogul_Mira, Plan X_Dra) 24-Mar-2015 07:14:40.9: Send Observation X_Dra to ACP Sequencer 24-Mar-2015 07:29:24.6: ACP data acquisition failed for Observation X_Dra. 24-Mar-2015 07:29:24.6: (Observation X_Dra interrupted by acquisition process failure.) 24-Mar-2015 07:30:07.8: Dispatcher cycle time: 0.0468001 sec. 24-Mar-2015 07:30:07.8: Acquire data for Observation V849_Her... 24-Mar-2015 07:30:07.8: (belongs to Project Walker, Plan V849_Her) 24-Mar-2015 07:30:08.2: Send Observation V849_Her to ACP Sequencer 24-Mar-2015 07:31:10.6: ACP data acquisition failed for Observation V849_Her. 24-Mar-2015 07:31:10.6: (Observation V849_Her interrupted by acquisition process failure.) 24-Mar-2015 07:33:04.3: ++ Auto Focus ++ 24-Mar-2015 07:33:04.3: Doing periodic autofocus. 24-Mar-2015 07:33:04.3: Start special ACP AutoFocus script for scheduler 24-Mar-2015 07:35:26.0: ** Sequencer script "AutoFocusScheduler" failed: 24-Mar-2015 07:35:26.0: **Script Error (Tracking has been stopped)** Source: FocusMax Message: Focuser link failed at line 72 column 2. Script Context: 69: Call SUP.WaitForSlew() 70: End If 71: => 72: If Not SUP.AutoFocus(CT.RightAscension, CT.Declination) Then ^ 73: Console.PrintLine "***AutoFocus failed." 74: End If 75: -- end -- 24-Mar-2015 07:35:26.0: ** Autofocus failed (n=6), will retry ASAP after 20 min. 24-Mar-2015 07:55:42.5: ++ Auto Focus ++ 24-Mar-2015 07:55:42.5: Doing periodic autofocus. 24-Mar-2015 07:55:42.5: Start special ACP AutoFocus script for scheduler 24-Mar-2015 07:57:25.2: ** Sequencer script "AutoFocusScheduler" failed: 24-Mar-2015 07:57:25.2: **Script Error (Tracking has been stopped)** Source: FocusMax Message: Focuser link failed at line 72 column 2. Script Context: 69: Call SUP.WaitForSlew() 70: End If 71: => 72: If Not SUP.AutoFocus(CT.RightAscension, CT.Declination) Then ^ 73: Console.PrintLine "***AutoFocus failed." 74: End If 75: -- end -- 24-Mar-2015 07:57:25.2: ** Autofocus failed (n=7), will retry ASAP after 20 min. 24-Mar-2015 08:17:31.9: ++ Auto Focus ++ 24-Mar-2015 08:17:31.9: Doing periodic autofocus. 24-Mar-2015 08:17:31.9: Start special ACP AutoFocus script for scheduler 24-Mar-2015 08:19:19.9: ** Sequencer script "AutoFocusScheduler" failed: 24-Mar-2015 08:19:19.9: **Script Error (Tracking has been stopped)** Source: FocusMax Message: Focuser link failed at line 72 column 2. Script Context: 69: Call SUP.WaitForSlew() 70: End If 71: => 72: If Not SUP.AutoFocus(CT.RightAscension, CT.Declination) Then ^ 73: Console.PrintLine "***AutoFocus failed." 74: End If 75: -- end -- 24-Mar-2015 08:19:19.9: ** Autofocus failed (n=8), will retry ASAP after 20 min. 24-Mar-2015 08:19:21.9: Dispatcher cycle time: 0.0468001 sec. 24-Mar-2015 08:19:21.9: Acquire data for Observation NGC_6218... 24-Mar-2015 08:19:21.9: (belongs to Project Welch_gc, Plan NGC_6218) 24-Mar-2015 08:19:21.9: Send Observation NGC_6218 to ACP Sequencer 24-Mar-2015 08:20:53.0: ACP data acquisition failed for Observation NGC_6218. 24-Mar-2015 08:20:53.0: (Observation NGC_6218 interrupted by acquisition process failure.) 24-Mar-2015 08:36:14.3: Dispatcher cycle time: 0.0468001 sec. 24-Mar-2015 08:36:14.3: Acquire data for Observation NGC_6254... 24-Mar-2015 08:36:14.3: (belongs to Project Welch_gc, Plan NGC_6254) 24-Mar-2015 08:36:14.3: Send Observation NGC_6254 to ACP Sequencer 24-Mar-2015 08:36:48.1: ACP data acquisition failed for Observation NGC_6254. 24-Mar-2015 08:36:48.1: (Observation NGC_6254 interrupted by acquisition process failure.) 24-Mar-2015 08:39:24.1: ++ Auto Focus ++ 24-Mar-2015 08:39:24.1: Doing periodic autofocus. 24-Mar-2015 08:39:24.1: Start special ACP AutoFocus script for scheduler 24-Mar-2015 08:41:27.2: ** Sequencer script "AutoFocusScheduler" failed: 24-Mar-2015 08:41:27.2: **Script Error (Tracking has been stopped)** Source: FocusMax Message: Focuser link failed at line 72 column 2. Script Context: 69: Call SUP.WaitForSlew() 70: End If 71: => 72: If Not SUP.AutoFocus(CT.RightAscension, CT.Declination) Then ^ 73: Console.PrintLine "***AutoFocus failed." 74: End If 75: -- end -- 24-Mar-2015 08:41:27.2: ** Autofocus failed (n=9), will retry ASAP after 20 min. 24-Mar-2015 08:46:12.8: Dispatcher cycle time: 0.0468001 sec. 24-Mar-2015 08:46:12.8: Acquire data for Observation WZ_Lyr... 24-Mar-2015 08:46:12.8: (belongs to Project Mogul_Mira, Plan WZ_Lyr) 24-Mar-2015 08:46:12.8: Send Observation WZ_Lyr to ACP Sequencer 24-Mar-2015 08:57:23.3: ACP data acquisition failed for Observation WZ_Lyr. 24-Mar-2015 08:57:23.3: (Observation WZ_Lyr interrupted by acquisition process failure.) 24-Mar-2015 08:57:32.3: Dispatcher cycle time: 0.0468 sec. 24-Mar-2015 08:57:32.3: Acquire data for Observation NGC_6171... 24-Mar-2015 08:57:32.3: (belongs to Project Welch_gc, Plan NGC_6171) 24-Mar-2015 08:57:32.3: Send Observation NGC_6171 to ACP Sequencer 24-Mar-2015 08:58:37.7: ACP data acquisition failed for Observation NGC_6171. 24-Mar-2015 08:58:37.7: (Observation NGC_6171 interrupted by acquisition process failure.) 24-Mar-2015 09:00:02.1: Dispatcher cycle time: 0.0468001 sec. 24-Mar-2015 09:00:02.1: Acquire data for Observation ST_Lyr... 24-Mar-2015 09:00:02.1: (belongs to Project Mogul_Mira, Plan ST_Lyr) 24-Mar-2015 09:00:02.1: Send Observation ST_Lyr to ACP Sequencer 24-Mar-2015 09:09:14.9: ACP data acquisition failed for Observation ST_Lyr. 24-Mar-2015 09:09:14.9: (Observation ST_Lyr interrupted by acquisition process failure.) 24-Mar-2015 09:09:19.2: ++ Auto Focus ++ 24-Mar-2015 09:09:19.2: Doing periodic autofocus. 24-Mar-2015 09:09:19.2: Start special ACP AutoFocus script for scheduler 24-Mar-2015 09:11:21.2: ** Sequencer script "AutoFocusScheduler" failed: 24-Mar-2015 09:11:21.2: **Script Error (Tracking has been stopped)** Source: FocusMax Message: Focuser link failed at line 72 column 2. Script Context: 69: Call SUP.WaitForSlew() 70: End If 71: => 72: If Not SUP.AutoFocus(CT.RightAscension, CT.Declination) Then ^ 73: Console.PrintLine "***AutoFocus failed." 74: End If 75: -- end -- 24-Mar-2015 09:11:21.2: ** Autofocus failed (n=10), will retry ASAP after 20 min. 24-Mar-2015 09:11:23.1: Dispatcher cycle time: 0.0780001 sec. 24-Mar-2015 09:11:23.1: Acquire data for Observation NGC_6366... 24-Mar-2015 09:11:23.1: (belongs to Project Welch_gc, Plan NGC_6366) 24-Mar-2015 09:11:23.1: Send Observation NGC_6366 to ACP Sequencer 24-Mar-2015 09:12:48.5: ACP data acquisition failed for Observation NGC_6366. 24-Mar-2015 09:12:48.5: (Observation NGC_6366 interrupted by acquisition process failure.) 24-Mar-2015 09:12:56.0: Dispatcher cycle time: 0.0780001 sec. 24-Mar-2015 09:12:56.0: Acquire data for Observation NGC_6426... 24-Mar-2015 09:12:56.0: (belongs to Project Welch_gc, Plan NGC_6426) 24-Mar-2015 09:12:56.1: Send Observation NGC_6426 to ACP Sequencer 24-Mar-2015 09:13:33.5: ACP data acquisition failed for Observation NGC_6426. 24-Mar-2015 09:13:33.5: (Observation NGC_6426 interrupted by acquisition process failure.) 24-Mar-2015 09:13:41.7: Dispatcher cycle time: 0.0624001 sec. 24-Mar-2015 09:13:41.7: Acquire data for Observation Z_Lyr... 24-Mar-2015 09:13:41.7: (belongs to Project Mogul_Mira, Plan Z_Lyr) 24-Mar-2015 09:13:41.7: Send Observation Z_Lyr to ACP Sequencer 24-Mar-2015 09:24:02.0: ACP data acquisition failed for Observation Z_Lyr. 24-Mar-2015 09:24:02.0: (Observation Z_Lyr interrupted by acquisition process failure.) 24-Mar-2015 09:24:06.2: Dispatcher cycle time: 0.0936001 sec. 24-Mar-2015 09:24:06.2: Acquire data for Observation NGC_6402... 24-Mar-2015 09:24:06.2: (belongs to Project Welch_gc, Plan NGC_6402) 24-Mar-2015 09:24:06.2: Send Observation NGC_6402 to ACP Sequencer 24-Mar-2015 09:25:00.3: ACP data acquisition failed for Observation NGC_6402. 24-Mar-2015 09:25:00.3: (Observation NGC_6402 interrupted by acquisition process failure.) 24-Mar-2015 09:25:10.1: Dispatcher cycle time: 0.0780001 sec. 24-Mar-2015 09:25:10.1: Acquire data for Observation V841_Oph... 24-Mar-2015 09:25:10.1: (belongs to Project AAVSO_Monitoring, Plan V841_Oph) 24-Mar-2015 09:25:10.1: Send Observation V841_Oph to ACP Sequencer 24-Mar-2015 09:37:16.2: ACP data acquisition failed for Observation V841_Oph. 24-Mar-2015 09:37:16.2: (Observation V841_Oph interrupted by acquisition process failure.) 24-Mar-2015 09:37:24.1: ++ Auto Focus ++ 24-Mar-2015 09:37:24.1: Doing periodic autofocus. 24-Mar-2015 09:37:24.1: Start special ACP AutoFocus script for scheduler 24-Mar-2015 09:38:48.5: ** Sequencer script "AutoFocusScheduler" failed: 24-Mar-2015 09:38:48.5: **Script Error (Tracking has been stopped)** Source: FocusMax Message: Focuser link failed at line 72 column 2. Script Context: 69: Call SUP.WaitForSlew() 70: End If 71: => 72: If Not SUP.AutoFocus(CT.RightAscension, CT.Declination) Then ^ 73: Console.PrintLine "***AutoFocus failed." 74: End If 75: -- end -- 24-Mar-2015 09:38:48.5: ** Autofocus failed (n=11), will retry ASAP after 20 min. 24-Mar-2015 09:38:50.7: Dispatcher cycle time: 0.4212008 sec. 24-Mar-2015 09:38:50.7: Acquire data for Observation UU_Lyr... 24-Mar-2015 09:38:50.7: (belongs to Project Mogul_Mira, Plan UU_Lyr) 24-Mar-2015 09:38:50.7: Send Observation UU_Lyr to ACP Sequencer 24-Mar-2015 09:49:53.6: ACP data acquisition failed for Observation UU_Lyr. 24-Mar-2015 09:49:53.6: (Observation UU_Lyr interrupted by acquisition process failure.) 24-Mar-2015 09:49:54.1: Dispatcher cycle time: 0.1092001 sec. 24-Mar-2015 09:49:54.1: Acquire data for Observation NGC_6535... 24-Mar-2015 09:49:54.1: (belongs to Project Welch_gc, Plan NGC_6535) 24-Mar-2015 09:49:54.1: Send Observation NGC_6535 to ACP Sequencer 24-Mar-2015 09:50:41.9: ACP data acquisition failed for Observation NGC_6535. 24-Mar-2015 09:50:41.9: (Observation NGC_6535 interrupted by acquisition process failure.) 24-Mar-2015 09:50:42.6: Dispatcher cycle time: 0.0624001 sec. 24-Mar-2015 09:50:42.6: Acquire data for Observation NGC_6779... 24-Mar-2015 09:50:42.6: (belongs to Project Welch_gc, Plan NGC_6779) 24-Mar-2015 09:50:42.6: Send Observation NGC_6779 to ACP Sequencer 24-Mar-2015 09:51:32.9: ACP data acquisition failed for Observation NGC_6779. 24-Mar-2015 09:51:32.9: (Observation NGC_6779 interrupted by acquisition process failure.) 24-Mar-2015 09:51:38.7: Dispatcher cycle time: 0.0312001 sec. 24-Mar-2015 09:51:38.7: Acquire data for Observation M56... 24-Mar-2015 09:51:38.7: (belongs to Project AAVSO_Monitoring, Plan M56) 24-Mar-2015 09:51:38.7: Doing 3 sets 24-Mar-2015 09:51:38.7: Send Observation M56 to ACP Sequencer 24-Mar-2015 09:52:10.9: ACP data acquisition failed for Observation M56. 24-Mar-2015 09:52:10.9: (Observation M56 interrupted by acquisition process failure.) 24-Mar-2015 09:55:49.0: Dispatcher cycle time: 0.0468001 sec. 24-Mar-2015 09:55:49.0: Acquire data for Observation Pal_10... 24-Mar-2015 09:55:49.0: (belongs to Project Welch_gc, Plan Pal_10) 24-Mar-2015 09:55:49.0: Send Observation Pal_10 to ACP Sequencer 24-Mar-2015 09:56:23.7: ACP data acquisition failed for Observation Pal_10. 24-Mar-2015 09:56:23.7: (Observation Pal_10 interrupted by acquisition process failure.) 24-Mar-2015 09:59:01.2: ++ Auto Focus ++ 24-Mar-2015 09:59:01.3: Doing periodic autofocus. 24-Mar-2015 09:59:01.3: Start special ACP AutoFocus script for scheduler 24-Mar-2015 10:00:46.3: ** Sequencer script "AutoFocusScheduler" failed: 24-Mar-2015 10:00:46.3: **Script Error (Tracking has been stopped)** Source: FocusMax Message: Focuser link failed at line 72 column 2. Script Context: 69: Call SUP.WaitForSlew() 70: End If 71: => 72: If Not SUP.AutoFocus(CT.RightAscension, CT.Declination) Then ^ 73: Console.PrintLine "***AutoFocus failed." 74: End If 75: -- end -- 24-Mar-2015 10:00:46.3: ** Autofocus failed (n=12), will retry ASAP after 20 min. 24-Mar-2015 10:01:23.9: Dispatcher cycle time: 0.0468 sec. 24-Mar-2015 10:01:23.9: Acquire data for Observation IC_1276... 24-Mar-2015 10:01:23.9: (belongs to Project Welch_gc, Plan IC_1276) 24-Mar-2015 10:01:23.9: Send Observation IC_1276 to ACP Sequencer 24-Mar-2015 10:02:48.7: ACP data acquisition failed for Observation IC_1276. 24-Mar-2015 10:02:48.7: (Observation IC_1276 interrupted by acquisition process failure.) 24-Mar-2015 10:02:56.0: Dispatcher cycle time: 0.0468001 sec. 24-Mar-2015 10:02:56.0: Acquire data for Observation YZ_Vul... 24-Mar-2015 10:02:56.0: (belongs to Project Mogul_Mira, Plan YZ_Vul) 24-Mar-2015 10:02:56.0: Send Observation YZ_Vul to ACP Sequencer 24-Mar-2015 10:13:12.1: ACP data acquisition failed for Observation YZ_Vul. 24-Mar-2015 10:13:12.1: (Observation YZ_Vul interrupted by acquisition process failure.) 24-Mar-2015 10:13:12.8: Dispatcher cycle time: 0.0468001 sec. 24-Mar-2015 10:13:12.8: Acquire data for Observation NGC_6235... 24-Mar-2015 10:13:12.8: (belongs to Project Welch_gc, Plan NGC_6235) 24-Mar-2015 10:13:12.8: Send Observation NGC_6235 to ACP Sequencer 24-Mar-2015 10:14:19.1: ACP data acquisition failed for Observation NGC_6235. 24-Mar-2015 10:14:19.1: (Observation NGC_6235 interrupted by acquisition process failure.) 24-Mar-2015 10:20:58.6: ++ Auto Focus ++ 24-Mar-2015 10:20:58.7: Doing periodic autofocus. 24-Mar-2015 10:20:58.7: Start special ACP AutoFocus script for scheduler 24-Mar-2015 10:22:16.4: ** Sequencer script "AutoFocusScheduler" failed: 24-Mar-2015 10:22:16.4: **Script Error (Tracking has been stopped)** Source: FocusMax Message: Focuser link failed at line 72 column 2. Script Context: 69: Call SUP.WaitForSlew() 70: End If 71: => 72: If Not SUP.AutoFocus(CT.RightAscension, CT.Declination) Then ^ 73: Console.PrintLine "***AutoFocus failed." 74: End If 75: -- end -- 24-Mar-2015 10:22:16.4: ** Autofocus failed (n=13), will retry ASAP after 20 min. 24-Mar-2015 10:30:54.9: Dispatcher cycle time: 0.0468001 sec. 24-Mar-2015 10:30:54.9: Acquire data for Observation NGC_6838... 24-Mar-2015 10:30:54.9: (belongs to Project Welch_gc, Plan NGC_6838) 24-Mar-2015 10:30:54.9: Send Observation NGC_6838 to ACP Sequencer 24-Mar-2015 10:32:30.0: ACP data acquisition failed for Observation NGC_6838. 24-Mar-2015 10:32:30.0: (Observation NGC_6838 interrupted by acquisition process failure.) 24-Mar-2015 10:33:08.0: Dispatcher cycle time: 0.0468 sec. 24-Mar-2015 10:33:08.0: Acquire data for Observation NGC_6760... 24-Mar-2015 10:33:08.0: (belongs to Project Welch_gc, Plan NGC_6760) 24-Mar-2015 10:33:08.0: Send Observation NGC_6760 to ACP Sequencer 24-Mar-2015 10:33:49.5: ACP data acquisition failed for Observation NGC_6760. 24-Mar-2015 10:33:49.5: (Observation NGC_6760 interrupted by acquisition process failure.) 24-Mar-2015 10:41:11.2: Dispatcher cycle time: 0.0468 sec. 24-Mar-2015 10:41:11.2: Acquire data for Observation SW_Aql... 24-Mar-2015 10:41:11.2: (belongs to Project Mogul_Mira, Plan SW_Aql) 24-Mar-2015 10:41:11.2: Send Observation SW_Aql to ACP Sequencer 24-Mar-2015 10:51:13.2: ACP data acquisition failed for Observation SW_Aql. 24-Mar-2015 10:51:13.2: (Observation SW_Aql interrupted by acquisition process failure.) 24-Mar-2015 10:51:21.4: ++ Auto Focus ++ 24-Mar-2015 10:51:21.4: Doing periodic autofocus. 24-Mar-2015 10:51:21.4: Start special ACP AutoFocus script for scheduler 24-Mar-2015 10:53:18.6: ** Sequencer script "AutoFocusScheduler" failed: 24-Mar-2015 10:53:18.6: **Script Error (Tracking has been stopped)** Source: FocusMax Message: Focuser link failed at line 72 column 2. Script Context: 69: Call SUP.WaitForSlew() 70: End If 71: => 72: If Not SUP.AutoFocus(CT.RightAscension, CT.Declination) Then ^ 73: Console.PrintLine "***AutoFocus failed." 74: End If 75: -- end -- 24-Mar-2015 10:53:18.6: ** Autofocus failed (n=14), will retry ASAP after 20 min. 24-Mar-2015 10:53:20.5: Dispatcher cycle time: 0.0780001 sec. 24-Mar-2015 10:53:20.5: Acquire data for Observation NGC_6712... 24-Mar-2015 10:53:20.5: (belongs to Project Welch_gc, Plan NGC_6712) 24-Mar-2015 10:53:20.5: Send Observation NGC_6712 to ACP Sequencer 24-Mar-2015 10:54:39.5: ACP data acquisition failed for Observation NGC_6712. 24-Mar-2015 10:54:39.5: (Observation NGC_6712 interrupted by acquisition process failure.) 24-Mar-2015 10:54:44.2: Dispatcher cycle time: 0.1092002 sec. 24-Mar-2015 10:54:44.2: Acquire data for Observation TU_Aql... 24-Mar-2015 10:54:44.2: (belongs to Project Mogul_Mira, Plan TU_Aql) 24-Mar-2015 10:54:44.2: Send Observation TU_Aql to ACP Sequencer 24-Mar-2015 11:04:31.1: ACP data acquisition failed for Observation TU_Aql. 24-Mar-2015 11:04:31.1: (Observation TU_Aql interrupted by acquisition process failure.) 24-Mar-2015 11:04:35.6: Dispatcher cycle time: 0.0780001 sec. 24-Mar-2015 11:04:35.6: Acquire data for Observation ST_Sge... 24-Mar-2015 11:04:35.6: (belongs to Project Mogul_Mira, Plan ST_Sge) 24-Mar-2015 11:04:35.6: Send Observation ST_Sge to ACP Sequencer 24-Mar-2015 11:14:49.5: ACP data acquisition failed for Observation ST_Sge. 24-Mar-2015 11:14:49.5: (Observation ST_Sge interrupted by acquisition process failure.) 24-Mar-2015 11:14:56.5: ++ Auto Focus ++ 24-Mar-2015 11:14:56.5: Doing periodic autofocus. 24-Mar-2015 11:14:56.5: Start special ACP AutoFocus script for scheduler 24-Mar-2015 11:16:47.0: ** Sequencer script "AutoFocusScheduler" failed: 24-Mar-2015 11:16:47.0: **Script Error (Tracking has been stopped)** Source: FocusMax Message: Focuser link failed at line 72 column 2. Script Context: 69: Call SUP.WaitForSlew() 70: End If 71: => 72: If Not SUP.AutoFocus(CT.RightAscension, CT.Declination) Then ^ 73: Console.PrintLine "***AutoFocus failed." 74: End If 75: -- end -- 24-Mar-2015 11:16:47.0: ** Autofocus failed (n=15), will retry ASAP after 20 min. 24-Mar-2015 11:16:48.7: Dispatcher cycle time: 0.0624001 sec. 24-Mar-2015 11:16:48.7: Acquire data for Observation FG_Sge... 24-Mar-2015 11:16:48.7: (belongs to Project Mogul_Mira, Plan FG_Sge) 24-Mar-2015 11:16:48.7: Send Observation FG_Sge to ACP Sequencer 24-Mar-2015 11:27:32.8: ACP data acquisition failed for Observation FG_Sge. 24-Mar-2015 11:27:32.8: (Observation FG_Sge interrupted by acquisition process failure.) 24-Mar-2015 11:27:37.4: Dispatcher cycle time: 0.0468001 sec. 24-Mar-2015 11:27:37.4: Acquire data for Observation V339_Del_TMO61... 24-Mar-2015 11:27:37.4: (belongs to Project AAVSO_Monitoring, Plan V339_Del_TMO61) 24-Mar-2015 11:27:37.4: Doing 3 sets 24-Mar-2015 11:27:37.4: Send Observation V339_Del_TMO61 to ACP Sequencer 24-Mar-2015 11:29:18.5: ACP data acquisition failed for Observation V339_Del_TMO61. 24-Mar-2015 11:29:18.5: (Observation V339_Del_TMO61 interrupted by acquisition process failure.) 24-Mar-2015 11:32:00.6: Dispatcher cycle time: 0.0468001 sec. 24-Mar-2015 11:32:00.6: Acquire data for Observation V1404_Cyg... 24-Mar-2015 11:32:00.6: (belongs to Project Walker, Plan V1404_Cyg) 24-Mar-2015 11:32:00.6: Send Observation V1404_Cyg to ACP Sequencer 24-Mar-2015 11:32:51.7: ACP data acquisition failed for Observation V1404_Cyg. 24-Mar-2015 11:32:51.7: (Observation V1404_Cyg interrupted by acquisition process failure.) 24-Mar-2015 11:37:19.5: ++ Auto Focus ++ 24-Mar-2015 11:37:19.5: Doing periodic autofocus. 24-Mar-2015 11:37:19.5: Start special ACP AutoFocus script for scheduler 24-Mar-2015 11:39:33.5: ** Sequencer script "AutoFocusScheduler" failed: 24-Mar-2015 11:39:33.5: **Script Error (Tracking has been stopped)** Source: FocusMax Message: Focuser link failed at line 72 column 2. Script Context: 69: Call SUP.WaitForSlew() 70: End If 71: => 72: If Not SUP.AutoFocus(CT.RightAscension, CT.Declination) Then ^ 73: Console.PrintLine "***AutoFocus failed." 74: End If 75: -- end -- 24-Mar-2015 11:39:33.5: ** Autofocus failed (n=16), will retry ASAP after 20 min. 24-Mar-2015 11:39:34.6: Dispatcher cycle time: 0.0624001 sec. 24-Mar-2015 11:39:34.6: Acquire data for Observation NGC_6934... 24-Mar-2015 11:39:34.6: (belongs to Project Welch_gc, Plan NGC_6934) 24-Mar-2015 11:39:35.0: Send Observation NGC_6934 to ACP Sequencer 24-Mar-2015 11:41:00.7: ACP data acquisition failed for Observation NGC_6934. 24-Mar-2015 11:41:00.7: (Observation NGC_6934 interrupted by acquisition process failure.) 24-Mar-2015 11:41:02.8: Dispatcher cycle time: 0.0780002 sec. 24-Mar-2015 11:41:02.8: Acquire data for Observation LX_Cyg... 24-Mar-2015 11:41:02.8: (belongs to Project Mogul_Mira, Plan LX_Cyg) 24-Mar-2015 11:41:02.8: Send Observation LX_Cyg to ACP Sequencer 24-Mar-2015 11:52:16.8: ACP data acquisition failed for Observation LX_Cyg. 24-Mar-2015 11:52:16.8: (Observation LX_Cyg interrupted by acquisition process failure.) 24-Mar-2015 11:59:34.5: ++ Auto Focus ++ 24-Mar-2015 11:59:34.6: Doing periodic autofocus. 24-Mar-2015 11:59:34.6: Start special ACP AutoFocus script for scheduler 24-Mar-2015 12:01:34.8: ** Sequencer script "AutoFocusScheduler" failed: 24-Mar-2015 12:01:34.8: **Script Error (Tracking has been stopped)** Source: FocusMax Message: Focuser link failed at line 72 column 2. Script Context: 69: Call SUP.WaitForSlew() 70: End If 71: => 72: If Not SUP.AutoFocus(CT.RightAscension, CT.Declination) Then ^ 73: Console.PrintLine "***AutoFocus failed." 74: End If 75: -- end -- 24-Mar-2015 12:01:34.8: ** Autofocus failed (n=17), will retry ASAP after 20 min. 24-Mar-2015 12:13:04.9: ++ Dawn Flats ++ 24-Mar-2015 12:13:04.9: Start ACP AutoFlat script for Dawn 24-Mar-2015 12:26:34.8: ** Sequencer script "AutoFlat" failed: 24-Mar-2015 12:26:34.8: **Script Error (Tracking has been stopped)** Source: FocusMax Message: Focuser link failed Probably an error in the flat plan at line 709 column 17. Script Context: 706: Console.PrintLine ErrMsg ' Log it regardless 707: If ErrCode <> ERR_TOOLATE Then ' Unless it's a "too late" error 708: On Error GoTo 0 ' Re-arm error trapping => 709: Err.Raise ErrCode, ErrSource, ErrMsg & vbCrLf & _ ^ 710: "Probably an error in the flat plan" ' Resignal with the error, it's fatal 711: Else ' Too late for that filter, try next! 712: On Error GoTo 0 -- end -- 24-Mar-2015 12:26:36.8: -- Observatory Shutdown -- 24-Mar-2015 12:26:37.3: Weather disconnected. 24-Mar-2015 12:26:37.3: Start ACP Sequencer's ShutdownObs script 24-Mar-2015 12:30:24.1: Weather successfully connected. Wait for valid data... 24-Mar-2015 14:01:34.4: Dispatcher stopped at 24-Mar-2015 14:01:34 UTC 24-Mar-2015 14:01:34.4: **DISPATCHER INTERRUPT LEVEL 1 RECEIVED** 24-Mar-2015 22:34:35.3: -- Weather Unsafe -- 24-Mar-2015 22:55:37.7: ++ Weather Safe ++ 25-Mar-2015 02:03:40.3: Dispatcher started at 25-Mar-2015 02:03:40 UTC 25-Mar-2015 02:03:40.3: Priority: W[0]=1.00 25-Mar-2015 02:03:40.3: Transit Altitude: W[1]=0.70 25-Mar-2015 02:03:40.3: Highest Altitude: W[6]=0.00 25-Mar-2015 02:03:40.3: Lateness: W[5]=0.00 25-Mar-2015 02:03:40.3: Slew Distance: W[2]=0.30 25-Mar-2015 02:03:40.3: Retry Count: W[3]=0.20 25-Mar-2015 02:03:40.3: Meridian Crossing: W[4]=0.30 25-Mar-2015 02:03:40.3: Obs Conditions: W[7]=0.40 25-Mar-2015 02:03:40.3: Rising Plan Delay: disabled 25-Mar-2015 02:03:41.1: Run statistics: 25-Mar-2015 02:03:41.1: Observations: 82 25-Mar-2015 02:03:41.1: Considered: 55 25-Mar-2015 02:03:41.1: Completed: 1 25-Mar-2015 02:03:41.1: Skipped: 3 25-Mar-2015 02:03:41.1: Never Eligible: 27 25-Mar-2015 02:03:41.1: Failed: 51 Log closed at Wed, Mar 25 2015 02:03:41 UTC (actual time)