Log opened at Mon, Mar 16 2015 01:49:31 UTC (actual time) Current log level is Verbose Scheduler version 3.5.3 Multi-user license: Arne Henden 16-Mar-2015 01:49:31.6: Simulated clock initialized at 16-Mar-2015 01:49:31 UTC 16-Mar-2015 01:49:31.7: Loaded Constraint plugin AirMass 16-Mar-2015 01:49:31.7: Loaded Constraint plugin AirmassRange 16-Mar-2015 01:49:31.7: Loaded Constraint plugin Horizon 16-Mar-2015 01:49:31.7: Loaded Constraint plugin HourAngle 16-Mar-2015 01:49:31.7: Loaded Constraint plugin MoonAvoid 16-Mar-2015 01:49:31.7: Loaded Constraint plugin MoonDown 16-Mar-2015 01:49:31.7: Loaded Constraint plugin SkyCondition 16-Mar-2015 01:49:31.7: Loaded Constraint plugin TimeRange 16-Mar-2015 01:49:32.3: 68 plans are now pending. 16-Mar-2015 01:49:32.3: Attach ACP sequencer 16-Mar-2015 01:51:55.0: Weather successfully connected. Wait for valid data... 16-Mar-2015 02:00:01.7: Dispatcher started at 16-Mar-2015 02:00:01 UTC 16-Mar-2015 02:00:01.7: Priority: W[0]=1.00 16-Mar-2015 02:00:01.7: Transit Altitude: W[1]=0.70 16-Mar-2015 02:00:01.7: Highest Altitude: W[6]=0.00 16-Mar-2015 02:00:01.7: Lateness: W[5]=0.00 16-Mar-2015 02:00:01.7: Slew Distance: W[2]=0.30 16-Mar-2015 02:00:01.7: Retry Count: W[3]=0.20 16-Mar-2015 02:00:01.7: Meridian Crossing: W[4]=0.30 16-Mar-2015 02:00:01.7: Obs Conditions: W[7]=0.40 16-Mar-2015 02:00:01.7: Rising Plan Delay: disabled 16-Mar-2015 02:00:04.0: ++ Observatory Startup ++ 16-Mar-2015 02:00:04.0: Start ACP Sequencer's StartupObs script 16-Mar-2015 02:08:07.1: ++ Auto Focus ++ 16-Mar-2015 02:08:07.1: Doing initial autofocus. 16-Mar-2015 02:08:07.1: Start special ACP AutoFocus script for scheduler 16-Mar-2015 02:10:32.6: Next periodic autofocus ASAP after 16-Mar-2015 04:10:16 UTC 16-Mar-2015 02:10:35.6: Plan MP_Gem has Monitor Mode. Time to resubmit it. 16-Mar-2015 02:10:35.6: Plan KH_15D has Monitor Mode. Time to resubmit it. 16-Mar-2015 02:10:35.6: Plan NGC_2438 has Monitor Mode. Time to resubmit it. 16-Mar-2015 02:10:35.6: Plan RZ_Leo has Monitor Mode. Time to resubmit it. 16-Mar-2015 02:10:35.6: Plan SDSS073224 has Monitor Mode. Time to resubmit it. 16-Mar-2015 02:10:35.6: Plan S_Lyn has Monitor Mode. Time to resubmit it. 16-Mar-2015 02:10:35.6: Plan T_CMi has Monitor Mode. Time to resubmit it. 16-Mar-2015 02:10:35.6: Plan TT_Mon has Monitor Mode. Time to resubmit it. 16-Mar-2015 02:10:35.6: Plan NGC_2419 has Monitor Mode. Time to resubmit it. 16-Mar-2015 02:10:35.6: Plan Pal_3 has Monitor Mode. Time to resubmit it. 16-Mar-2015 02:10:35.6: Plan V838_Mon has Monitor Mode. Time to resubmit it. 16-Mar-2015 02:10:36.2: Dispatcher cycle time: 1.5756028 sec. 16-Mar-2015 02:10:36.2: Acquire data for Observation KH_15D... 16-Mar-2015 02:10:36.2: (belongs to Project Staels, Plan KH_15D) 16-Mar-2015 02:10:36.3: Send Observation KH_15D to ACP Sequencer 16-Mar-2015 02:24:41.3: Acquisition time: 845.0856844 sec. 16-Mar-2015 02:24:41.3: Data for Observation KH_15D acquired successfully. 16-Mar-2015 02:24:41.4: Image Efficiency: 75.6% 16-Mar-2015 02:24:41.4: Cycle Efficiency: 99.8% 16-Mar-2015 02:24:49.6: Dispatcher cycle time: 0.3744006 sec. 16-Mar-2015 02:24:49.6: Acquire data for Observation V838_Mon... 16-Mar-2015 02:24:49.6: (belongs to Project AAVSO_Monitoring, Plan V838_Mon) 16-Mar-2015 02:24:49.6: Doing 15 sets 16-Mar-2015 02:24:49.6: Send Observation V838_Mon to ACP Sequencer 16-Mar-2015 02:43:05.2: Send Observation V838_Mon to ACP Sequencer 16-Mar-2015 02:47:31.3: ACP data acquisition failed for Observation V838_Mon. 16-Mar-2015 02:47:31.3: (Observation V838_Mon interrupted by acquisition process failure.) 16-Mar-2015 02:47:37.1: Dispatcher cycle time: 0.577201 sec. 16-Mar-2015 02:47:37.1: Acquire data for Observation SDSS073224... 16-Mar-2015 02:47:37.1: (belongs to Project AGN, Plan SDSS073224) 16-Mar-2015 02:47:37.1: Send Observation SDSS073224 to ACP Sequencer 16-Mar-2015 03:32:58.1: Acquisition time: 2721.0679795 sec. 16-Mar-2015 03:32:58.1: Data for Observation SDSS073224 acquired successfully. 16-Mar-2015 03:32:58.2: Image Efficiency: 88.2% 16-Mar-2015 03:32:58.2: Cycle Efficiency: 100.0% 16-Mar-2015 03:33:05.0: Dispatcher cycle time: 0.2496004 sec. 16-Mar-2015 03:33:05.0: Acquire data for Observation NGC_2438... 16-Mar-2015 03:33:05.0: (belongs to Project Staels, Plan NGC_2438) 16-Mar-2015 03:33:05.0: Send Observation NGC_2438 to ACP Sequencer 16-Mar-2015 03:38:51.3: Acquisition time: 346.2280082 sec. 16-Mar-2015 03:38:51.3: Data for Observation NGC_2438 acquired successfully. 16-Mar-2015 03:38:51.3: Image Efficiency: 51.9% 16-Mar-2015 03:38:51.3: Cycle Efficiency: 99.9% 16-Mar-2015 03:39:00.3: Dispatcher cycle time: 0.6240011 sec. 16-Mar-2015 03:39:00.3: Acquire data for Observation MP_Gem... 16-Mar-2015 03:39:00.3: (belongs to Project Staels, Plan MP_Gem) 16-Mar-2015 03:39:00.3: Send Observation MP_Gem to ACP Sequencer 16-Mar-2015 03:43:42.6: Acquisition time: 282.2200957 sec. 16-Mar-2015 03:43:42.6: Data for Observation MP_Gem acquired successfully. 16-Mar-2015 03:43:42.6: Image Efficiency: 47.7% 16-Mar-2015 03:43:42.6: Cycle Efficiency: 99.8% 16-Mar-2015 03:43:49.2: Dispatcher cycle time: 0.592801 sec. 16-Mar-2015 03:43:49.2: Acquire data for Observation T_CMi... 16-Mar-2015 03:43:49.2: (belongs to Project Mogul_Mira, Plan T_CMi) 16-Mar-2015 03:43:49.2: Send Observation T_CMi to ACP Sequencer 16-Mar-2015 04:01:21.1: Acquisition time: 1051.9264477 sec. 16-Mar-2015 04:01:21.1: Data for Observation T_CMi acquired successfully. 16-Mar-2015 04:01:21.1: Image Efficiency: 47.5% 16-Mar-2015 04:01:21.1: Cycle Efficiency: 99.9% 16-Mar-2015 04:01:22.3: Dispatcher cycle time: 0.577201 sec. 16-Mar-2015 04:01:22.3: Acquire data for Observation TT_Mon... 16-Mar-2015 04:01:22.3: (belongs to Project Mogul_Mira, Plan TT_Mon) 16-Mar-2015 04:01:22.3: Send Observation TT_Mon to ACP Sequencer 16-Mar-2015 04:22:46.8: Acquisition time: 1284.5384562 sec. 16-Mar-2015 04:22:46.8: Data for Observation TT_Mon acquired successfully. 16-Mar-2015 04:22:46.8: Image Efficiency: 58.4% 16-Mar-2015 04:22:46.8: Cycle Efficiency: 100.0% 16-Mar-2015 04:22:55.2: ++ Auto Focus ++ 16-Mar-2015 04:22:55.3: Doing periodic autofocus. 16-Mar-2015 04:22:55.3: Start special ACP AutoFocus script for scheduler 16-Mar-2015 04:25:38.2: Next periodic autofocus ASAP after 16-Mar-2015 06:24:59 UTC 16-Mar-2015 04:25:40.5: Dispatcher cycle time: 0.2028003 sec. 16-Mar-2015 04:25:40.5: Acquire data for Observation NGC_2419... 16-Mar-2015 04:25:40.5: (belongs to Project Welch_gc, Plan NGC_2419) 16-Mar-2015 04:25:40.5: Send Observation NGC_2419 to ACP Sequencer 16-Mar-2015 05:05:36.4: Acquisition time: 2395.9332084 sec. 16-Mar-2015 05:05:36.4: Data for Observation NGC_2419 acquired successfully. 16-Mar-2015 05:05:36.4: Image Efficiency: 83.5% 16-Mar-2015 05:05:36.4: Cycle Efficiency: 100.0% 16-Mar-2015 05:05:42.8: Dispatcher cycle time: 0.2184004 sec. 16-Mar-2015 05:05:42.8: Acquire data for Observation S_Lyn... 16-Mar-2015 05:05:42.8: (belongs to Project Mogul_Mira, Plan S_Lyn) 16-Mar-2015 05:05:42.8: Send Observation S_Lyn to ACP Sequencer 16-Mar-2015 05:25:33.6: Acquisition time: 1190.7666915 sec. 16-Mar-2015 05:25:33.6: Data for Observation S_Lyn acquired successfully. 16-Mar-2015 05:25:33.6: Image Efficiency: 56.7% 16-Mar-2015 05:25:33.6: Cycle Efficiency: 100.0% 16-Mar-2015 05:25:42.0: Dispatcher cycle time: 0.1872003 sec. 16-Mar-2015 05:25:42.0: Acquire data for Observation RZ_Leo... 16-Mar-2015 05:25:42.0: (belongs to Project Walker, Plan RZ_Leo) 16-Mar-2015 05:25:42.0: Send Observation RZ_Leo to ACP Sequencer 16-Mar-2015 05:30:36.2: ACP data acquisition failed for Observation RZ_Leo. 16-Mar-2015 05:30:36.2: (Observation RZ_Leo interrupted by acquisition process failure.) 16-Mar-2015 05:30:44.9: Dispatcher cycle time: 0.577201 sec. 16-Mar-2015 05:30:44.9: Acquire data for Observation Pal_3... 16-Mar-2015 05:30:44.9: (belongs to Project Welch_gc, Plan Pal_3) 16-Mar-2015 05:30:44.9: Send Observation Pal_3 to ACP Sequencer 16-Mar-2015 05:31:00.0: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 05:31:00.0: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 05:31:03.1: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 05:31:03.1: ACP data acquisition failed for Observation Pal_3. 16-Mar-2015 05:31:03.1: (Observation Pal_3 interrupted by acquisition process failure.) 16-Mar-2015 05:31:13.4: Dispatcher cycle time: 0.2184004 sec. 16-Mar-2015 05:31:13.4: Acquire data for Observation Pal_4... 16-Mar-2015 05:31:13.4: (belongs to Project Welch_gc, Plan Pal_4) 16-Mar-2015 05:31:13.4: Send Observation Pal_4 to ACP Sequencer 16-Mar-2015 05:31:28.8: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 05:31:28.8: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 05:31:31.9: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 05:31:31.9: ACP data acquisition failed for Observation Pal_4. 16-Mar-2015 05:31:31.9: (Observation Pal_4 interrupted by acquisition process failure.) 16-Mar-2015 05:31:42.6: Dispatcher cycle time: 0.2028003 sec. 16-Mar-2015 05:31:42.6: Acquire data for Observation NGC_4147... 16-Mar-2015 05:31:42.6: (belongs to Project Welch_gc, Plan NGC_4147) 16-Mar-2015 05:31:42.6: Send Observation NGC_4147 to ACP Sequencer 16-Mar-2015 05:31:58.0: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 05:31:58.0: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 05:32:01.1: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 05:32:01.1: ACP data acquisition failed for Observation NGC_4147. 16-Mar-2015 05:32:01.1: (Observation NGC_4147 interrupted by acquisition process failure.) 16-Mar-2015 05:32:07.9: Dispatcher cycle time: 0.1872004 sec. 16-Mar-2015 05:32:07.9: Acquire data for Observation NGC_5024... 16-Mar-2015 05:32:07.9: (belongs to Project Welch_gc, Plan NGC_5024) 16-Mar-2015 05:32:07.9: Send Observation NGC_5024 to ACP Sequencer 16-Mar-2015 05:32:23.0: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 05:32:23.0: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 05:32:26.1: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 05:32:26.1: ACP data acquisition failed for Observation NGC_5024. 16-Mar-2015 05:32:26.1: (Observation NGC_5024 interrupted by acquisition process failure.) 16-Mar-2015 05:32:35.1: Dispatcher cycle time: 0.1872003 sec. 16-Mar-2015 05:32:35.1: Acquire data for Observation NGC_5053... 16-Mar-2015 05:32:35.1: (belongs to Project Welch_gc, Plan NGC_5053) 16-Mar-2015 05:32:35.5: Send Observation NGC_5053 to ACP Sequencer 16-Mar-2015 05:32:50.8: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 05:32:50.8: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 05:32:53.9: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 05:32:53.9: ACP data acquisition failed for Observation NGC_5053. 16-Mar-2015 05:32:53.9: (Observation NGC_5053 interrupted by acquisition process failure.) 16-Mar-2015 05:33:00.2: Dispatcher cycle time: 0.1560003 sec. 16-Mar-2015 05:33:00.2: Acquire data for Observation NGC_5272... 16-Mar-2015 05:33:00.2: (belongs to Project Welch_gc, Plan NGC_5272) 16-Mar-2015 05:33:00.5: Send Observation NGC_5272 to ACP Sequencer 16-Mar-2015 05:33:15.7: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 05:33:15.7: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 05:33:18.8: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 05:33:18.8: ACP data acquisition failed for Observation NGC_5272. 16-Mar-2015 05:33:18.8: (Observation NGC_5272 interrupted by acquisition process failure.) 16-Mar-2015 05:33:23.8: Dispatcher cycle time: 0.1248002 sec. 16-Mar-2015 05:33:23.8: Acquire data for Observation NGC_5466... 16-Mar-2015 05:33:23.8: (belongs to Project Welch_gc, Plan NGC_5466) 16-Mar-2015 05:33:24.1: Send Observation NGC_5466 to ACP Sequencer 16-Mar-2015 05:33:39.2: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 05:33:39.2: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 05:33:42.3: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 05:33:42.3: ACP data acquisition failed for Observation NGC_5466. 16-Mar-2015 05:33:42.3: (Observation NGC_5466 interrupted by acquisition process failure.) 16-Mar-2015 05:33:43.3: Dispatcher cycle time: 0.1248002 sec. 16-Mar-2015 05:33:43.3: Acquire data for Observation WX_CMi... 16-Mar-2015 05:33:43.3: (belongs to Project Mogul_Mira, Plan WX_CMi) 16-Mar-2015 05:33:43.3: Send Observation WX_CMi to ACP Sequencer 16-Mar-2015 05:33:58.4: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 05:33:58.4: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 05:34:01.5: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 05:34:01.5: ACP data acquisition failed for Observation WX_CMi. 16-Mar-2015 05:34:01.5: (Observation WX_CMi interrupted by acquisition process failure.) 16-Mar-2015 05:34:12.3: Dispatcher cycle time: 0.4212007 sec. 16-Mar-2015 05:34:12.3: Acquire data for Observation ST_Aur... 16-Mar-2015 05:34:12.3: (belongs to Project Mogul_Mira, Plan ST_Aur) 16-Mar-2015 05:34:12.3: Send Observation ST_Aur to ACP Sequencer 16-Mar-2015 05:34:27.5: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 05:34:27.5: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 05:34:30.7: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 05:34:30.7: ACP data acquisition failed for Observation ST_Aur. 16-Mar-2015 05:34:30.7: (Observation ST_Aur interrupted by acquisition process failure.) 16-Mar-2015 05:34:36.7: Dispatcher cycle time: 0.0936002 sec. 16-Mar-2015 05:34:36.7: Acquire data for Observation VV_Gem... 16-Mar-2015 05:34:36.7: (belongs to Project Mogul_Mira, Plan VV_Gem) 16-Mar-2015 05:34:36.7: Send Observation VV_Gem to ACP Sequencer 16-Mar-2015 05:34:52.2: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 05:34:52.2: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 05:34:55.3: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 05:34:55.3: ACP data acquisition failed for Observation VV_Gem. 16-Mar-2015 05:34:55.3: (Observation VV_Gem interrupted by acquisition process failure.) 16-Mar-2015 05:35:04.6: Dispatcher cycle time: 0.0624001 sec. 16-Mar-2015 05:35:04.6: Acquire data for Observation V1184_Tau... 16-Mar-2015 05:35:04.6: (belongs to Project Staels, Plan V1184_Tau) 16-Mar-2015 05:35:04.6: Send Observation V1184_Tau to ACP Sequencer 16-Mar-2015 05:35:20.1: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 05:35:20.1: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 05:35:23.2: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 05:35:23.2: ACP data acquisition failed for Observation V1184_Tau. 16-Mar-2015 05:35:23.2: (Observation V1184_Tau interrupted by acquisition process failure.) 16-Mar-2015 06:25:01.0: ++ Auto Focus ++ 16-Mar-2015 06:25:01.0: Doing periodic autofocus. 16-Mar-2015 06:25:01.0: Start special ACP AutoFocus script for scheduler 16-Mar-2015 06:25:16.4: ** Sequencer script "AutoFocusScheduler" failed: 16-Mar-2015 06:25:16.4: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 37 column 5. Script Context: 34: Sub Main() 35: Dim Filt, dtStart, buf, CT 36: => 37: Set SUP = CreateObject("ACP.AcquireSupport") ^ 38: SUP.Initialize 39: 40: dtStart = Util.SysUTCDate -- end -- 16-Mar-2015 06:25:16.4: ** Autofocus failed (n=1), will retry ASAP after 0 min. 16-Mar-2015 06:25:55.2: ++ Auto Focus ++ 16-Mar-2015 06:25:55.3: Doing periodic autofocus. 16-Mar-2015 06:25:55.3: Start special ACP AutoFocus script for scheduler 16-Mar-2015 06:26:10.6: ** Sequencer script "AutoFocusScheduler" failed: 16-Mar-2015 06:26:10.6: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 37 column 5. Script Context: 34: Sub Main() 35: Dim Filt, dtStart, buf, CT 36: => 37: Set SUP = CreateObject("ACP.AcquireSupport") ^ 38: SUP.Initialize 39: 40: dtStart = Util.SysUTCDate -- end -- 16-Mar-2015 06:26:10.6: ** Autofocus failed (n=2), will retry ASAP after 5 min. 16-Mar-2015 06:31:32.8: ++ Auto Focus ++ 16-Mar-2015 06:31:32.8: Doing periodic autofocus. 16-Mar-2015 06:31:32.8: Start special ACP AutoFocus script for scheduler 16-Mar-2015 06:31:47.9: ** Sequencer script "AutoFocusScheduler" failed: 16-Mar-2015 06:31:47.9: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 37 column 5. Script Context: 34: Sub Main() 35: Dim Filt, dtStart, buf, CT 36: => 37: Set SUP = CreateObject("ACP.AcquireSupport") ^ 38: SUP.Initialize 39: 40: dtStart = Util.SysUTCDate -- end -- 16-Mar-2015 06:31:47.9: ** Autofocus failed (n=3), will retry ASAP after 10 min. 16-Mar-2015 06:35:19.3: Dispatcher cycle time: 0.0624001 sec. 16-Mar-2015 06:35:19.3: Acquire data for Observation RR_Vir... 16-Mar-2015 06:35:19.3: (belongs to Project Mogul_Mira, Plan RR_Vir) 16-Mar-2015 06:35:19.3: Send Observation RR_Vir to ACP Sequencer 16-Mar-2015 06:35:34.4: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 06:35:34.4: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 06:35:37.5: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 06:35:37.5: ACP data acquisition failed for Observation RR_Vir. 16-Mar-2015 06:35:37.5: (Observation RR_Vir interrupted by acquisition process failure.) 16-Mar-2015 06:42:22.9: ++ Auto Focus ++ 16-Mar-2015 06:42:22.9: Doing periodic autofocus. 16-Mar-2015 06:42:22.9: Start special ACP AutoFocus script for scheduler 16-Mar-2015 06:42:38.0: ** Sequencer script "AutoFocusScheduler" failed: 16-Mar-2015 06:42:38.0: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 37 column 5. Script Context: 34: Sub Main() 35: Dim Filt, dtStart, buf, CT 36: => 37: Set SUP = CreateObject("ACP.AcquireSupport") ^ 38: SUP.Initialize 39: 40: dtStart = Util.SysUTCDate -- end -- 16-Mar-2015 06:42:38.0: ** Autofocus failed (n=4), will retry ASAP after 15 min. 16-Mar-2015 06:47:46.0: Dispatcher cycle time: 0.0624001 sec. 16-Mar-2015 06:47:46.0: Acquire data for Observation NGC_5634... 16-Mar-2015 06:47:46.0: (belongs to Project Welch_gc, Plan NGC_5634) 16-Mar-2015 06:47:46.0: Send Observation NGC_5634 to ACP Sequencer 16-Mar-2015 06:48:01.1: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 06:48:01.1: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 06:48:04.2: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 06:48:04.2: ACP data acquisition failed for Observation NGC_5634. 16-Mar-2015 06:48:04.2: (Observation NGC_5634 interrupted by acquisition process failure.) 16-Mar-2015 06:57:41.9: ++ Auto Focus ++ 16-Mar-2015 06:57:41.9: Doing periodic autofocus. 16-Mar-2015 06:57:41.9: Start special ACP AutoFocus script for scheduler 16-Mar-2015 06:57:57.2: ** Sequencer script "AutoFocusScheduler" failed: 16-Mar-2015 06:57:57.2: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 37 column 5. Script Context: 34: Sub Main() 35: Dim Filt, dtStart, buf, CT 36: => 37: Set SUP = CreateObject("ACP.AcquireSupport") ^ 38: SUP.Initialize 39: 40: dtStart = Util.SysUTCDate -- end -- 16-Mar-2015 06:57:57.2: ** Autofocus failed (n=5), will retry ASAP after 20 min. 16-Mar-2015 07:01:57.0: Dispatcher cycle time: 0.0624001 sec. 16-Mar-2015 07:01:57.0: Acquire data for Observation NGC_6229... 16-Mar-2015 07:01:57.0: (belongs to Project Welch_gc, Plan NGC_6229) 16-Mar-2015 07:01:57.0: Send Observation NGC_6229 to ACP Sequencer 16-Mar-2015 07:02:12.5: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 07:02:12.5: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 07:02:15.5: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 07:02:15.5: ACP data acquisition failed for Observation NGC_6229. 16-Mar-2015 07:02:15.5: (Observation NGC_6229 interrupted by acquisition process failure.) 16-Mar-2015 07:09:34.5: Dispatcher cycle time: 0.0624001 sec. 16-Mar-2015 07:09:34.5: Acquire data for Observation NGC_5904... 16-Mar-2015 07:09:34.5: (belongs to Project Welch_gc, Plan NGC_5904) 16-Mar-2015 07:09:34.8: Send Observation NGC_5904 to ACP Sequencer 16-Mar-2015 07:09:49.9: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 07:09:49.9: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 07:09:53.0: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 07:09:53.0: ACP data acquisition failed for Observation NGC_5904. 16-Mar-2015 07:09:53.0: (Observation NGC_5904 interrupted by acquisition process failure.) 16-Mar-2015 07:13:42.0: Dispatcher cycle time: 0.0624001 sec. 16-Mar-2015 07:13:42.0: Acquire data for Observation Pal_5... 16-Mar-2015 07:13:42.0: (belongs to Project Welch_gc, Plan Pal_5) 16-Mar-2015 07:13:42.0: Send Observation Pal_5 to ACP Sequencer 16-Mar-2015 07:13:58.1: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 07:13:58.1: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 07:14:01.2: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 07:14:01.2: ACP data acquisition failed for Observation Pal_5. 16-Mar-2015 07:14:01.2: (Observation Pal_5 interrupted by acquisition process failure.) 16-Mar-2015 07:16:29.9: Dispatcher cycle time: 0.0624001 sec. 16-Mar-2015 07:16:29.9: Acquire data for Observation NGC_6205... 16-Mar-2015 07:16:29.9: (belongs to Project Welch_gc, Plan NGC_6205) 16-Mar-2015 07:16:29.9: Send Observation NGC_6205 to ACP Sequencer 16-Mar-2015 07:16:45.0: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 07:16:45.0: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 07:16:48.1: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 07:16:48.1: ACP data acquisition failed for Observation NGC_6205. 16-Mar-2015 07:16:48.1: (Observation NGC_6205 interrupted by acquisition process failure.) 16-Mar-2015 07:18:04.1: ++ Auto Focus ++ 16-Mar-2015 07:18:04.2: Doing periodic autofocus. 16-Mar-2015 07:18:04.2: Start special ACP AutoFocus script for scheduler 16-Mar-2015 07:18:19.3: ** Sequencer script "AutoFocusScheduler" failed: 16-Mar-2015 07:18:19.3: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 37 column 5. Script Context: 34: Sub Main() 35: Dim Filt, dtStart, buf, CT 36: => 37: Set SUP = CreateObject("ACP.AcquireSupport") ^ 38: SUP.Initialize 39: 40: dtStart = Util.SysUTCDate -- end -- 16-Mar-2015 07:18:19.3: ** Autofocus failed (n=6), will retry ASAP after 20 min. 16-Mar-2015 07:38:31.6: ++ Auto Focus ++ 16-Mar-2015 07:38:31.6: Doing periodic autofocus. 16-Mar-2015 07:38:31.6: Start special ACP AutoFocus script for scheduler 16-Mar-2015 07:38:46.7: ** Sequencer script "AutoFocusScheduler" failed: 16-Mar-2015 07:38:46.7: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 37 column 5. Script Context: 34: Sub Main() 35: Dim Filt, dtStart, buf, CT 36: => 37: Set SUP = CreateObject("ACP.AcquireSupport") ^ 38: SUP.Initialize 39: 40: dtStart = Util.SysUTCDate -- end -- 16-Mar-2015 07:38:46.7: ** Autofocus failed (n=7), will retry ASAP after 20 min. 16-Mar-2015 07:39:27.6: Dispatcher cycle time: 0.0780001 sec. 16-Mar-2015 07:39:27.6: Acquire data for Observation NGC_6341... 16-Mar-2015 07:39:27.6: (belongs to Project Welch_gc, Plan NGC_6341) 16-Mar-2015 07:39:27.7: Send Observation NGC_6341 to ACP Sequencer 16-Mar-2015 07:39:42.8: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 07:39:42.8: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 07:39:45.9: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 07:39:45.9: ACP data acquisition failed for Observation NGC_6341. 16-Mar-2015 07:39:45.9: (Observation NGC_6341 interrupted by acquisition process failure.) 16-Mar-2015 07:45:59.8: Dispatcher cycle time: 0.0780001 sec. 16-Mar-2015 07:45:59.8: Acquire data for Observation X_Dra... 16-Mar-2015 07:45:59.9: (belongs to Project Mogul_Mira, Plan X_Dra) 16-Mar-2015 07:45:59.9: Send Observation X_Dra to ACP Sequencer 16-Mar-2015 07:46:15.3: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 07:46:15.3: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 07:46:18.4: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 07:46:18.4: ACP data acquisition failed for Observation X_Dra. 16-Mar-2015 07:46:18.4: (Observation X_Dra interrupted by acquisition process failure.) 16-Mar-2015 07:59:20.9: ++ Auto Focus ++ 16-Mar-2015 07:59:20.9: Doing periodic autofocus. 16-Mar-2015 07:59:20.9: Start special ACP AutoFocus script for scheduler 16-Mar-2015 07:59:36.4: ** Sequencer script "AutoFocusScheduler" failed: 16-Mar-2015 07:59:36.4: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 37 column 5. Script Context: 34: Sub Main() 35: Dim Filt, dtStart, buf, CT 36: => 37: Set SUP = CreateObject("ACP.AcquireSupport") ^ 38: SUP.Initialize 39: 40: dtStart = Util.SysUTCDate -- end -- 16-Mar-2015 07:59:36.4: ** Autofocus failed (n=8), will retry ASAP after 20 min. 16-Mar-2015 08:01:28.8: Dispatcher cycle time: 0.0624001 sec. 16-Mar-2015 08:01:28.8: Acquire data for Observation V849_Her... 16-Mar-2015 08:01:28.9: (belongs to Project Walker, Plan V849_Her) 16-Mar-2015 08:01:28.9: Send Observation V849_Her to ACP Sequencer 16-Mar-2015 08:01:44.3: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 08:01:44.3: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 08:01:47.3: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 08:01:47.3: ACP data acquisition failed for Observation V849_Her. 16-Mar-2015 08:01:47.3: (Observation V849_Her interrupted by acquisition process failure.) 16-Mar-2015 08:19:44.8: ++ Auto Focus ++ 16-Mar-2015 08:19:44.9: Doing periodic autofocus. 16-Mar-2015 08:19:44.9: Start special ACP AutoFocus script for scheduler 16-Mar-2015 08:20:00.2: ** Sequencer script "AutoFocusScheduler" failed: 16-Mar-2015 08:20:00.2: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 37 column 5. Script Context: 34: Sub Main() 35: Dim Filt, dtStart, buf, CT 36: => 37: Set SUP = CreateObject("ACP.AcquireSupport") ^ 38: SUP.Initialize 39: 40: dtStart = Util.SysUTCDate -- end -- 16-Mar-2015 08:20:00.2: ** Autofocus failed (n=9), will retry ASAP after 20 min. 16-Mar-2015 08:40:12.4: ++ Auto Focus ++ 16-Mar-2015 08:40:12.4: Doing periodic autofocus. 16-Mar-2015 08:40:12.4: Start special ACP AutoFocus script for scheduler 16-Mar-2015 08:40:28.0: ** Sequencer script "AutoFocusScheduler" failed: 16-Mar-2015 08:40:28.0: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 37 column 5. Script Context: 34: Sub Main() 35: Dim Filt, dtStart, buf, CT 36: => 37: Set SUP = CreateObject("ACP.AcquireSupport") ^ 38: SUP.Initialize 39: 40: dtStart = Util.SysUTCDate -- end -- 16-Mar-2015 08:40:28.0: ** Autofocus failed (n=10), will retry ASAP after 20 min. 16-Mar-2015 08:50:24.8: Dispatcher cycle time: 0.0624001 sec. 16-Mar-2015 08:50:24.8: Acquire data for Observation NGC_6218... 16-Mar-2015 08:50:24.8: (belongs to Project Welch_gc, Plan NGC_6218) 16-Mar-2015 08:50:24.8: Send Observation NGC_6218 to ACP Sequencer 16-Mar-2015 08:50:40.5: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 08:50:40.5: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 08:50:43.6: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 08:50:43.6: ACP data acquisition failed for Observation NGC_6218. 16-Mar-2015 08:50:43.6: (Observation NGC_6218 interrupted by acquisition process failure.) 16-Mar-2015 09:00:31.7: ++ Auto Focus ++ 16-Mar-2015 09:00:31.7: Doing periodic autofocus. 16-Mar-2015 09:00:31.7: Start special ACP AutoFocus script for scheduler 16-Mar-2015 09:00:47.3: ** Sequencer script "AutoFocusScheduler" failed: 16-Mar-2015 09:00:47.3: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 37 column 5. Script Context: 34: Sub Main() 35: Dim Filt, dtStart, buf, CT 36: => 37: Set SUP = CreateObject("ACP.AcquireSupport") ^ 38: SUP.Initialize 39: 40: dtStart = Util.SysUTCDate -- end -- 16-Mar-2015 09:00:47.3: ** Autofocus failed (n=11), will retry ASAP after 20 min. 16-Mar-2015 09:07:30.4: Dispatcher cycle time: 0.0624001 sec. 16-Mar-2015 09:07:30.4: Acquire data for Observation NGC_6254... 16-Mar-2015 09:07:30.4: (belongs to Project Welch_gc, Plan NGC_6254) 16-Mar-2015 09:07:30.4: Send Observation NGC_6254 to ACP Sequencer 16-Mar-2015 09:07:46.0: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 09:07:46.0: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 09:07:49.1: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 09:07:49.1: ACP data acquisition failed for Observation NGC_6254. 16-Mar-2015 09:07:49.1: (Observation NGC_6254 interrupted by acquisition process failure.) 16-Mar-2015 09:17:16.4: Dispatcher cycle time: 0.0624001 sec. 16-Mar-2015 09:17:16.4: Acquire data for Observation WZ_Lyr... 16-Mar-2015 09:17:16.4: (belongs to Project Mogul_Mira, Plan WZ_Lyr) 16-Mar-2015 09:17:16.5: Send Observation WZ_Lyr to ACP Sequencer 16-Mar-2015 09:17:32.0: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 09:17:32.0: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 09:17:35.1: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 09:17:35.1: ACP data acquisition failed for Observation WZ_Lyr. 16-Mar-2015 09:17:35.1: (Observation WZ_Lyr interrupted by acquisition process failure.) 16-Mar-2015 09:20:09.6: Dispatcher cycle time: 0.0780002 sec. 16-Mar-2015 09:20:09.6: Acquire data for Observation NGC_6171... 16-Mar-2015 09:20:09.6: (belongs to Project Welch_gc, Plan NGC_6171) 16-Mar-2015 09:20:09.6: Send Observation NGC_6171 to ACP Sequencer 16-Mar-2015 09:20:24.8: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 09:20:24.8: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 09:20:27.9: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 09:20:27.9: ACP data acquisition failed for Observation NGC_6171. 16-Mar-2015 09:20:27.9: (Observation NGC_6171 interrupted by acquisition process failure.) 16-Mar-2015 09:21:08.0: ++ Auto Focus ++ 16-Mar-2015 09:21:08.1: Doing periodic autofocus. 16-Mar-2015 09:21:08.1: Start special ACP AutoFocus script for scheduler 16-Mar-2015 09:21:23.2: ** Sequencer script "AutoFocusScheduler" failed: 16-Mar-2015 09:21:23.2: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 37 column 5. Script Context: 34: Sub Main() 35: Dim Filt, dtStart, buf, CT 36: => 37: Set SUP = CreateObject("ACP.AcquireSupport") ^ 38: SUP.Initialize 39: 40: dtStart = Util.SysUTCDate -- end -- 16-Mar-2015 09:21:23.2: ** Autofocus failed (n=12), will retry ASAP after 20 min. 16-Mar-2015 09:31:24.2: Dispatcher cycle time: 0.0624001 sec. 16-Mar-2015 09:31:24.2: Acquire data for Observation ST_Lyr... 16-Mar-2015 09:31:24.2: (belongs to Project Mogul_Mira, Plan ST_Lyr) 16-Mar-2015 09:31:24.2: Send Observation ST_Lyr to ACP Sequencer 16-Mar-2015 09:31:39.5: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 09:31:39.5: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 09:31:42.6: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 09:31:42.6: ACP data acquisition failed for Observation ST_Lyr. 16-Mar-2015 09:31:42.6: (Observation ST_Lyr interrupted by acquisition process failure.) 16-Mar-2015 09:32:31.8: Dispatcher cycle time: 0.0780002 sec. 16-Mar-2015 09:32:31.8: Acquire data for Observation NGC_6426... 16-Mar-2015 09:32:31.8: (belongs to Project Welch_gc, Plan NGC_6426) 16-Mar-2015 09:32:31.8: Send Observation NGC_6426 to ACP Sequencer 16-Mar-2015 09:32:47.3: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 09:32:47.3: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 09:32:50.4: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 09:32:50.4: ACP data acquisition failed for Observation NGC_6426. 16-Mar-2015 09:32:50.4: (Observation NGC_6426 interrupted by acquisition process failure.) 16-Mar-2015 09:36:41.6: Dispatcher cycle time: 0.0780002 sec. 16-Mar-2015 09:36:41.6: Acquire data for Observation Z_Lyr... 16-Mar-2015 09:36:41.6: (belongs to Project Mogul_Mira, Plan Z_Lyr) 16-Mar-2015 09:36:41.6: Send Observation Z_Lyr to ACP Sequencer 16-Mar-2015 09:36:57.2: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 09:36:57.2: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 09:37:00.3: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 09:37:00.3: ACP data acquisition failed for Observation Z_Lyr. 16-Mar-2015 09:37:00.3: (Observation Z_Lyr interrupted by acquisition process failure.) 16-Mar-2015 09:41:45.6: ++ Auto Focus ++ 16-Mar-2015 09:41:45.6: Doing periodic autofocus. 16-Mar-2015 09:41:45.6: Start special ACP AutoFocus script for scheduler 16-Mar-2015 09:42:01.0: ** Sequencer script "AutoFocusScheduler" failed: 16-Mar-2015 09:42:01.0: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 37 column 5. Script Context: 34: Sub Main() 35: Dim Filt, dtStart, buf, CT 36: => 37: Set SUP = CreateObject("ACP.AcquireSupport") ^ 38: SUP.Initialize 39: 40: dtStart = Util.SysUTCDate -- end -- 16-Mar-2015 09:42:01.0: ** Autofocus failed (n=13), will retry ASAP after 20 min. 16-Mar-2015 09:42:03.2: Dispatcher cycle time: 0.0624001 sec. 16-Mar-2015 09:42:03.2: Acquire data for Observation NGC_6366... 16-Mar-2015 09:42:03.2: (belongs to Project Welch_gc, Plan NGC_6366) 16-Mar-2015 09:42:03.2: Send Observation NGC_6366 to ACP Sequencer 16-Mar-2015 09:42:18.6: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 09:42:18.6: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 09:42:21.7: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 09:42:21.7: ACP data acquisition failed for Observation NGC_6366. 16-Mar-2015 09:42:21.7: (Observation NGC_6366 interrupted by acquisition process failure.) 16-Mar-2015 09:45:33.3: Dispatcher cycle time: 0.3900006 sec. 16-Mar-2015 09:45:33.3: Acquire data for Observation NGC_6402... 16-Mar-2015 09:45:33.3: (belongs to Project Welch_gc, Plan NGC_6402) 16-Mar-2015 09:45:33.3: Send Observation NGC_6402 to ACP Sequencer 16-Mar-2015 09:45:48.8: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 09:45:48.8: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 09:45:51.9: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 09:45:51.9: ACP data acquisition failed for Observation NGC_6402. 16-Mar-2015 09:45:51.9: (Observation NGC_6402 interrupted by acquisition process failure.) 16-Mar-2015 09:46:01.6: Dispatcher cycle time: 0.0624001 sec. 16-Mar-2015 09:46:01.6: Acquire data for Observation V841_Oph... 16-Mar-2015 09:46:01.6: (belongs to Project AAVSO_Monitoring, Plan V841_Oph) 16-Mar-2015 09:46:01.9: Send Observation V841_Oph to ACP Sequencer 16-Mar-2015 09:46:17.2: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 09:46:17.2: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 09:46:20.3: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 09:46:20.3: ACP data acquisition failed for Observation V841_Oph. 16-Mar-2015 09:46:20.3: (Observation V841_Oph interrupted by acquisition process failure.) 16-Mar-2015 09:55:37.9: Dispatcher cycle time: 0.0624001 sec. 16-Mar-2015 09:55:37.9: Acquire data for Observation UU_Lyr... 16-Mar-2015 09:55:37.9: (belongs to Project Mogul_Mira, Plan UU_Lyr) 16-Mar-2015 09:55:37.9: Send Observation UU_Lyr to ACP Sequencer 16-Mar-2015 09:55:53.0: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 09:55:53.0: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 09:55:56.1: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 09:55:56.1: ACP data acquisition failed for Observation UU_Lyr. 16-Mar-2015 09:55:56.1: (Observation UU_Lyr interrupted by acquisition process failure.) 16-Mar-2015 10:01:24.0: Dispatcher cycle time: 0.0780001 sec. 16-Mar-2015 10:01:24.0: Acquire data for Observation NGC_6535... 16-Mar-2015 10:01:24.0: (belongs to Project Welch_gc, Plan NGC_6535) 16-Mar-2015 10:01:24.0: Send Observation NGC_6535 to ACP Sequencer 16-Mar-2015 10:01:39.1: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 10:01:39.1: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 10:01:42.2: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 10:01:42.2: ACP data acquisition failed for Observation NGC_6535. 16-Mar-2015 10:01:42.2: (Observation NGC_6535 interrupted by acquisition process failure.) 16-Mar-2015 10:02:22.1: ++ Auto Focus ++ 16-Mar-2015 10:02:22.1: Doing periodic autofocus. 16-Mar-2015 10:02:22.1: Start special ACP AutoFocus script for scheduler 16-Mar-2015 10:02:37.7: ** Sequencer script "AutoFocusScheduler" failed: 16-Mar-2015 10:02:37.7: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 37 column 5. Script Context: 34: Sub Main() 35: Dim Filt, dtStart, buf, CT 36: => 37: Set SUP = CreateObject("ACP.AcquireSupport") ^ 38: SUP.Initialize 39: 40: dtStart = Util.SysUTCDate -- end -- 16-Mar-2015 10:02:37.7: ** Autofocus failed (n=14), will retry ASAP after 20 min. 16-Mar-2015 10:02:39.8: Dispatcher cycle time: 0.0780002 sec. 16-Mar-2015 10:02:39.8: Acquire data for Observation NGC_6779... 16-Mar-2015 10:02:39.8: (belongs to Project Welch_gc, Plan NGC_6779) 16-Mar-2015 10:02:39.8: Send Observation NGC_6779 to ACP Sequencer 16-Mar-2015 10:02:55.8: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 10:02:55.8: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 10:02:59.2: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 10:02:59.2: ACP data acquisition failed for Observation NGC_6779. 16-Mar-2015 10:02:59.2: (Observation NGC_6779 interrupted by acquisition process failure.) 16-Mar-2015 10:03:06.8: Dispatcher cycle time: 0.0624001 sec. 16-Mar-2015 10:03:06.8: Acquire data for Observation M56... 16-Mar-2015 10:03:06.8: (belongs to Project AAVSO_Monitoring, Plan M56) 16-Mar-2015 10:03:06.8: Doing 3 sets 16-Mar-2015 10:03:06.8: Send Observation M56 to ACP Sequencer 16-Mar-2015 10:03:22.2: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 10:03:22.2: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 10:03:25.3: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 10:03:25.3: ACP data acquisition failed for Observation M56. 16-Mar-2015 10:03:25.3: (Observation M56 interrupted by acquisition process failure.) 16-Mar-2015 10:23:04.3: ++ Auto Focus ++ 16-Mar-2015 10:23:04.3: Doing periodic autofocus. 16-Mar-2015 10:23:04.3: Start special ACP AutoFocus script for scheduler 16-Mar-2015 10:23:19.4: ** Sequencer script "AutoFocusScheduler" failed: 16-Mar-2015 10:23:19.4: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 37 column 5. Script Context: 34: Sub Main() 35: Dim Filt, dtStart, buf, CT 36: => 37: Set SUP = CreateObject("ACP.AcquireSupport") ^ 38: SUP.Initialize 39: 40: dtStart = Util.SysUTCDate -- end -- 16-Mar-2015 10:23:19.4: ** Autofocus failed (n=15), will retry ASAP after 20 min. 16-Mar-2015 10:26:59.2: Dispatcher cycle time: 0.0780001 sec. 16-Mar-2015 10:26:59.2: Acquire data for Observation Pal_10... 16-Mar-2015 10:26:59.2: (belongs to Project Welch_gc, Plan Pal_10) 16-Mar-2015 10:26:59.2: Send Observation Pal_10 to ACP Sequencer 16-Mar-2015 10:27:14.5: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 10:27:14.5: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 10:27:17.6: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 10:27:17.6: ACP data acquisition failed for Observation Pal_10. 16-Mar-2015 10:27:17.6: (Observation Pal_10 interrupted by acquisition process failure.) 16-Mar-2015 10:32:34.0: Dispatcher cycle time: 0.0624001 sec. 16-Mar-2015 10:32:34.0: Acquire data for Observation IC_1276... 16-Mar-2015 10:32:34.0: (belongs to Project Welch_gc, Plan IC_1276) 16-Mar-2015 10:32:34.0: Send Observation IC_1276 to ACP Sequencer 16-Mar-2015 10:32:49.1: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 10:32:49.1: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 10:32:52.2: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 10:32:52.2: ACP data acquisition failed for Observation IC_1276. 16-Mar-2015 10:32:52.2: (Observation IC_1276 interrupted by acquisition process failure.) 16-Mar-2015 10:34:09.0: Dispatcher cycle time: 0.0624001 sec. 16-Mar-2015 10:34:09.0: Acquire data for Observation YZ_Vul... 16-Mar-2015 10:34:09.1: (belongs to Project Mogul_Mira, Plan YZ_Vul) 16-Mar-2015 10:34:09.1: Send Observation YZ_Vul to ACP Sequencer 16-Mar-2015 10:34:24.1: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 10:34:24.1: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 10:34:27.2: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 10:34:27.2: ACP data acquisition failed for Observation YZ_Vul. 16-Mar-2015 10:34:27.2: (Observation YZ_Vul interrupted by acquisition process failure.) 16-Mar-2015 10:39:27.9: Dispatcher cycle time: 0.0780001 sec. 16-Mar-2015 10:39:27.9: Acquire data for Observation NGC_6235... 16-Mar-2015 10:39:27.9: (belongs to Project Welch_gc, Plan NGC_6235) 16-Mar-2015 10:39:28.2: Send Observation NGC_6235 to ACP Sequencer 16-Mar-2015 10:39:43.3: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 10:39:43.3: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 10:39:46.4: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 10:39:46.4: ACP data acquisition failed for Observation NGC_6235. 16-Mar-2015 10:39:46.4: (Observation NGC_6235 interrupted by acquisition process failure.) 16-Mar-2015 10:43:29.1: ++ Auto Focus ++ 16-Mar-2015 10:43:29.1: Doing periodic autofocus. 16-Mar-2015 10:43:29.1: Start special ACP AutoFocus script for scheduler 16-Mar-2015 10:43:44.2: ** Sequencer script "AutoFocusScheduler" failed: 16-Mar-2015 10:43:44.2: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 37 column 5. Script Context: 34: Sub Main() 35: Dim Filt, dtStart, buf, CT 36: => 37: Set SUP = CreateObject("ACP.AcquireSupport") ^ 38: SUP.Initialize 39: 40: dtStart = Util.SysUTCDate -- end -- 16-Mar-2015 10:43:44.2: ** Autofocus failed (n=16), will retry ASAP after 20 min. 16-Mar-2015 11:02:16.4: Dispatcher cycle time: 0.0780002 sec. 16-Mar-2015 11:02:16.4: Acquire data for Observation NGC_6838... 16-Mar-2015 11:02:16.4: (belongs to Project Welch_gc, Plan NGC_6838) 16-Mar-2015 11:02:16.4: Send Observation NGC_6838 to ACP Sequencer 16-Mar-2015 11:02:31.6: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 11:02:31.6: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 11:02:34.7: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 11:02:34.7: ACP data acquisition failed for Observation NGC_6838. 16-Mar-2015 11:02:34.7: (Observation NGC_6838 interrupted by acquisition process failure.) 16-Mar-2015 11:03:56.2: ++ Auto Focus ++ 16-Mar-2015 11:03:56.2: Doing periodic autofocus. 16-Mar-2015 11:03:56.2: Start special ACP AutoFocus script for scheduler 16-Mar-2015 11:04:11.5: ** Sequencer script "AutoFocusScheduler" failed: 16-Mar-2015 11:04:11.5: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 37 column 5. Script Context: 34: Sub Main() 35: Dim Filt, dtStart, buf, CT 36: => 37: Set SUP = CreateObject("ACP.AcquireSupport") ^ 38: SUP.Initialize 39: 40: dtStart = Util.SysUTCDate -- end -- 16-Mar-2015 11:04:11.5: ** Autofocus failed (n=17), will retry ASAP after 20 min. 16-Mar-2015 11:04:48.3: Dispatcher cycle time: 0.0624001 sec. 16-Mar-2015 11:04:48.3: Acquire data for Observation NGC_6760... 16-Mar-2015 11:04:48.3: (belongs to Project Welch_gc, Plan NGC_6760) 16-Mar-2015 11:04:48.3: Send Observation NGC_6760 to ACP Sequencer 16-Mar-2015 11:05:04.1: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 11:05:04.1: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 11:05:07.5: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 11:05:07.5: ACP data acquisition failed for Observation NGC_6760. 16-Mar-2015 11:05:07.5: (Observation NGC_6760 interrupted by acquisition process failure.) 16-Mar-2015 11:12:23.2: Dispatcher cycle time: 0.0780001 sec. 16-Mar-2015 11:12:23.2: Acquire data for Observation SW_Aql... 16-Mar-2015 11:12:23.2: (belongs to Project Mogul_Mira, Plan SW_Aql) 16-Mar-2015 11:12:23.2: Send Observation SW_Aql to ACP Sequencer 16-Mar-2015 11:12:38.3: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 11:12:38.3: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 11:12:41.4: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 11:12:41.4: ACP data acquisition failed for Observation SW_Aql. 16-Mar-2015 11:12:41.4: (Observation SW_Aql interrupted by acquisition process failure.) 16-Mar-2015 11:16:14.7: Dispatcher cycle time: 0.0780002 sec. 16-Mar-2015 11:16:14.7: Acquire data for Observation ST_Sge... 16-Mar-2015 11:16:14.7: (belongs to Project Mogul_Mira, Plan ST_Sge) 16-Mar-2015 11:16:14.7: Send Observation ST_Sge to ACP Sequencer 16-Mar-2015 11:16:29.8: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 11:16:29.8: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 11:16:32.9: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 11:16:32.9: ACP data acquisition failed for Observation ST_Sge. 16-Mar-2015 11:16:32.9: (Observation ST_Sge interrupted by acquisition process failure.) 16-Mar-2015 11:17:14.8: Dispatcher cycle time: 0.0780002 sec. 16-Mar-2015 11:17:14.8: Acquire data for Observation FG_Sge... 16-Mar-2015 11:17:14.8: (belongs to Project Mogul_Mira, Plan FG_Sge) 16-Mar-2015 11:17:14.9: Send Observation FG_Sge to ACP Sequencer 16-Mar-2015 11:17:30.4: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 11:17:30.4: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 11:17:33.5: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 11:17:33.5: ACP data acquisition failed for Observation FG_Sge. 16-Mar-2015 11:17:33.5: (Observation FG_Sge interrupted by acquisition process failure.) 16-Mar-2015 11:18:15.7: Dispatcher cycle time: 0.0624001 sec. 16-Mar-2015 11:18:15.7: Acquire data for Observation TU_Aql... 16-Mar-2015 11:18:15.7: (belongs to Project Mogul_Mira, Plan TU_Aql) 16-Mar-2015 11:18:15.7: Send Observation TU_Aql to ACP Sequencer 16-Mar-2015 11:18:30.8: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 11:18:30.8: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 11:18:33.8: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 11:18:33.8: ACP data acquisition failed for Observation TU_Aql. 16-Mar-2015 11:18:33.8: (Observation TU_Aql interrupted by acquisition process failure.) 16-Mar-2015 11:20:31.8: Dispatcher cycle time: 0.0624001 sec. 16-Mar-2015 11:20:31.8: Acquire data for Observation NGC_6712... 16-Mar-2015 11:20:31.8: (belongs to Project Welch_gc, Plan NGC_6712) 16-Mar-2015 11:20:31.8: Send Observation NGC_6712 to ACP Sequencer 16-Mar-2015 11:20:47.5: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 11:20:47.5: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 11:20:50.6: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 11:20:50.6: ACP data acquisition failed for Observation NGC_6712. 16-Mar-2015 11:20:50.6: (Observation NGC_6712 interrupted by acquisition process failure.) 16-Mar-2015 11:24:32.9: ++ Auto Focus ++ 16-Mar-2015 11:24:32.9: Doing periodic autofocus. 16-Mar-2015 11:24:32.9: Start special ACP AutoFocus script for scheduler 16-Mar-2015 11:24:48.2: ** Sequencer script "AutoFocusScheduler" failed: 16-Mar-2015 11:24:48.2: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 37 column 5. Script Context: 34: Sub Main() 35: Dim Filt, dtStart, buf, CT 36: => 37: Set SUP = CreateObject("ACP.AcquireSupport") ^ 38: SUP.Initialize 39: 40: dtStart = Util.SysUTCDate -- end -- 16-Mar-2015 11:24:48.2: ** Autofocus failed (n=18), will retry ASAP after 20 min. 16-Mar-2015 11:27:46.1: Dispatcher cycle time: 0.0624001 sec. 16-Mar-2015 11:27:46.1: Acquire data for Observation V339_Del_TMO61... 16-Mar-2015 11:27:46.1: (belongs to Project AAVSO_Monitoring, Plan V339_Del_TMO61) 16-Mar-2015 11:27:46.1: Doing 3 sets 16-Mar-2015 11:27:46.1: Send Observation V339_Del_TMO61 to ACP Sequencer 16-Mar-2015 11:28:01.9: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 11:28:01.9: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 11:28:04.9: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 11:28:05.0: ACP data acquisition failed for Observation V339_Del_TMO61. 16-Mar-2015 11:28:05.0: (Observation V339_Del_TMO61 interrupted by acquisition process failure.) 16-Mar-2015 11:44:55.6: ++ Auto Focus ++ 16-Mar-2015 11:44:55.6: Doing periodic autofocus. 16-Mar-2015 11:44:55.6: Start special ACP AutoFocus script for scheduler 16-Mar-2015 11:45:11.2: ** Sequencer script "AutoFocusScheduler" failed: 16-Mar-2015 11:45:11.2: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 37 column 5. Script Context: 34: Sub Main() 35: Dim Filt, dtStart, buf, CT 36: => 37: Set SUP = CreateObject("ACP.AcquireSupport") ^ 38: SUP.Initialize 39: 40: dtStart = Util.SysUTCDate -- end -- 16-Mar-2015 11:45:11.2: ** Autofocus failed (n=19), will retry ASAP after 20 min. 16-Mar-2015 12:03:12.4: Dispatcher cycle time: 0.0624001 sec. 16-Mar-2015 12:03:12.4: Acquire data for Observation V1404_Cyg... 16-Mar-2015 12:03:12.4: (belongs to Project Walker, Plan V1404_Cyg) 16-Mar-2015 12:03:12.4: Send Observation V1404_Cyg to ACP Sequencer 16-Mar-2015 12:03:28.1: ** Sequencer script "AcquireScheduler" failed: 16-Mar-2015 12:03:28.1: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 16-Mar-2015 12:03:31.2: ACP ERROR: Run failed due to script error (see ACP run log) 16-Mar-2015 12:03:31.2: ACP data acquisition failed for Observation V1404_Cyg. 16-Mar-2015 12:03:31.2: (Observation V1404_Cyg interrupted by acquisition process failure.) 16-Mar-2015 12:05:24.8: ++ Auto Focus ++ 16-Mar-2015 12:05:24.8: Doing periodic autofocus. 16-Mar-2015 12:05:25.2: Start special ACP AutoFocus script for scheduler 16-Mar-2015 12:05:40.3: ** Sequencer script "AutoFocusScheduler" failed: 16-Mar-2015 12:05:40.3: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 37 column 5. Script Context: 34: Sub Main() 35: Dim Filt, dtStart, buf, CT 36: => 37: Set SUP = CreateObject("ACP.AcquireSupport") ^ 38: SUP.Initialize 39: 40: dtStart = Util.SysUTCDate -- end -- 16-Mar-2015 12:05:40.3: ** Autofocus failed (n=20), will retry ASAP after 20 min. 16-Mar-2015 12:23:37.2: ++ Dawn Flats ++ 16-Mar-2015 12:23:37.2: Start ACP AutoFlat script for Dawn 16-Mar-2015 12:23:52.7: ** Sequencer script "AutoFlat" failed: 16-Mar-2015 12:23:52.7: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 512 column 5. Script Context: 509: ' Create AcquireSupport here, for SUP.GetNextliveline() 510: ' It is not initialized till below, after we validate. 511: ' => 512: Set SUP = CreateObject("ACP.AcquireSupport") ' Create AcquireSupport ^ 513: ' 514: ' Open the flat plan, read into an array of strings. This array 515: ' is used at dawn to execute the flat plan in reverse. Interpret -- end -- 16-Mar-2015 12:23:52.8: -- Observatory Shutdown -- 16-Mar-2015 12:23:53.0: Weather disconnected. 16-Mar-2015 12:23:53.0: Start ACP Sequencer's ShutdownObs script 16-Mar-2015 12:24:45.1: ** Sequencer script "ShutdownObs" failed: 16-Mar-2015 12:24:45.1: **Script Error** Source: ACP Observatory Control Software Message: at line 48 column 9. Script Context: 45: 46: if(Util.CameraConnected) { 47: Console.PrintLine("Shutting down imager. Please wait..."); => 48: var z = Camera.TemperatureSetpoint; // Remember this, as MaxIm remembers ^ 49: Console.PrintLine(" (raising temperature to +5.0C... 20 min max)"); 50: var tPrev = -273.15; 51: Console.PrintLine(" (cooler is now at " + Util.FormatVar(Camera.Temperature, "0.0") + "C"); -- end -- 16-Mar-2015 12:24:45.1: **EXCEPTION IN SCHEDULER: 16-Mar-2015 12:24:45.1: Observatory shutdown failed, cannot continue. 16-Mar-2015 12:24:45.1: Traceback: at DC3.Scheduler.Engine.DoShutdownIf() at DC3.Scheduler.Engine.Run() 16-Mar-2015 12:24:45.2: Run statistics: 16-Mar-2015 12:24:45.2: Observations: 82 16-Mar-2015 12:24:45.2: Considered: 66 16-Mar-2015 12:24:45.2: Completed: 9 16-Mar-2015 12:24:45.2: Skipped: 6 16-Mar-2015 12:24:45.2: Never Eligible: 16 16-Mar-2015 12:24:45.2: Failed: 51 16-Mar-2015 12:24:45.2: Shutter-Open efficiency: 24.36% 16-Mar-2015 12:24:45.2: Overall Efficiency: 42.85% 16-Mar-2015 12:24:45.2: Release ACP sequencer Log closed at Mon, Mar 16 2015 12:24:46 UTC (actual time)