Log opened at Fri, Oct 24 2014 18:53:28 UTC (actual time) Current log level is Verbose Scheduler version 3.5.3 Multi-user license: Arne Henden 25-Oct-2014 00:20:19.9: ++ Observatory Startup ++ 25-Oct-2014 00:20:19.9: Start ACP Sequencer's StartupObs script 25-Oct-2014 00:21:16.8: Open the observatory dome/roof 25-Oct-2014 00:52:00.5: Dispatcher stopped at 25-Oct-2014 00:52:00 UTC 25-Oct-2014 00:52:00.5: **DISPATCHER INTERRUPT LEVEL 1 RECEIVED** 25-Oct-2014 00:53:54.1: Dispatcher started at 25-Oct-2014 00:53:54 UTC 25-Oct-2014 00:53:54.1: Priority: W[0]=1.00 25-Oct-2014 00:53:54.1: Transit Altitude: W[1]=0.70 25-Oct-2014 00:53:54.1: Highest Altitude: W[6]=0.00 25-Oct-2014 00:53:54.1: Lateness: W[5]=0.00 25-Oct-2014 00:53:54.1: Slew Distance: W[2]=0.30 25-Oct-2014 00:53:54.1: Retry Count: W[3]=0.20 25-Oct-2014 00:53:54.1: Meridian Crossing: W[4]=0.30 25-Oct-2014 00:53:54.1: Obs Conditions: W[7]=0.40 25-Oct-2014 00:53:54.1: Rising Plan Delay: disabled 25-Oct-2014 00:53:57.0: ++ Observatory Startup ++ 25-Oct-2014 00:53:57.0: Start ACP Sequencer's StartupObs script 25-Oct-2014 01:18:06.2: ++ Auto Focus ++ 25-Oct-2014 01:18:06.2: Doing initial autofocus. 25-Oct-2014 01:18:06.2: Start special ACP AutoFocus script for scheduler 25-Oct-2014 01:20:58.6: ** Autofocus failed (n=1), will retry ASAP after 0 min. 25-Oct-2014 01:21:00.2: Plan SN_2013dy has Monitor Mode. Time to resubmit it. 25-Oct-2014 01:21:00.2: Plan V0809_Cep has Monitor Mode. Time to resubmit it. 25-Oct-2014 01:21:00.2: Plan V0959_Mon has Monitor Mode. Time to resubmit it. 25-Oct-2014 01:21:00.2: Plan SN_2013ej has Monitor Mode. Time to resubmit it. 25-Oct-2014 01:21:00.2: Plan MP_Gem has Monitor Mode. Time to resubmit it. 25-Oct-2014 01:21:00.2: Plan GSC_3649-0825 has Monitor Mode. Time to resubmit it. 25-Oct-2014 01:21:00.2: Plan 2MASS_23275353+5214532 has Monitor Mode. Time to resubmit it. 25-Oct-2014 01:21:00.2: Plan IC_348 has Monitor Mode. Time to resubmit it. 25-Oct-2014 01:21:00.2: Plan KH_15D has Monitor Mode. Time to resubmit it. 25-Oct-2014 01:21:00.2: Plan V1184_Tau has Monitor Mode. Time to resubmit it. 25-Oct-2014 01:21:00.2: Plan CB_32 has Monitor Mode. Time to resubmit it. 25-Oct-2014 01:21:00.2: Plan V1404_Cyg has Monitor Mode. Time to resubmit it. 25-Oct-2014 01:21:00.2: Plan V0965_Per has Monitor Mode. Time to resubmit it. 25-Oct-2014 01:21:00.2: Plan KT_Eri has Monitor Mode. Time to resubmit it. 25-Oct-2014 01:21:00.2: Plan SDSS073224 has Monitor Mode. Time to resubmit it. 25-Oct-2014 01:21:00.2: Plan NGC_7790 has Monitor Mode. Time to resubmit it. 25-Oct-2014 01:21:00.2: Plan M56 has Monitor Mode. Time to resubmit it. 25-Oct-2014 01:21:00.2: Plan DG_Peg has Monitor Mode. Time to resubmit it. 25-Oct-2014 01:21:00.2: Plan LX_Cyg has Monitor Mode. Time to resubmit it. 25-Oct-2014 01:21:00.2: Plan RR_Equ has Monitor Mode. Time to resubmit it. 25-Oct-2014 01:21:00.2: Plan S_Lyn has Monitor Mode. Time to resubmit it. 25-Oct-2014 01:21:00.2: Plan S_Ori has Monitor Mode. Time to resubmit it. 25-Oct-2014 01:21:00.2: Plan ST_Aur has Monitor Mode. Time to resubmit it. 25-Oct-2014 01:21:00.2: Plan SV_And has Monitor Mode. Time to resubmit it. 25-Oct-2014 01:21:00.2: Plan Z_Tau has Monitor Mode. Time to resubmit it. 25-Oct-2014 01:21:00.2: Plan SDSS_J100658 has Monitor Mode. Time to resubmit it. 25-Oct-2014 01:21:00.2: Plan SBS_1108 has Monitor Mode. Time to resubmit it. 25-Oct-2014 01:21:00.2: Plan NGC_7078 has Monitor Mode. Time to resubmit it. 25-Oct-2014 01:21:00.2: Plan NGC_7089 has Monitor Mode. Time to resubmit it. 25-Oct-2014 01:21:00.2: Plan Pal_13 has Monitor Mode. Time to resubmit it. 25-Oct-2014 01:21:00.2: Plan NGC_7492 has Monitor Mode. Time to resubmit it. 25-Oct-2014 01:21:01.5: Dispatcher cycle time: 1.2948023 sec. 25-Oct-2014 01:21:01.5: Acquire data for Observation M56... 25-Oct-2014 01:21:01.5: (belongs to Project AAVSO_Monitoring, Plan M56) 25-Oct-2014 01:21:01.5: Doing 3 sets 25-Oct-2014 01:21:01.5: Send Observation M56 to ACP Sequencer 25-Oct-2014 01:22:22.3: ACP data acquisition failed for Observation M56. 25-Oct-2014 01:22:22.3: (Observation M56 interrupted by acquisition process failure.) 25-Oct-2014 01:22:30.6: ++ Auto Focus ++ 25-Oct-2014 01:22:30.6: Doing periodic autofocus. 25-Oct-2014 01:22:30.6: Start special ACP AutoFocus script for scheduler 25-Oct-2014 01:23:33.1: ** Sequencer script "AutoFocusScheduler" failed: 25-Oct-2014 01:23:33.1: **Script Error (Tracking has been stopped)** Source: MaxIm.CCDCamera Message: **Failed to start the exposure at line 72 column 2. Script Context: 69: Call SUP.WaitForSlew() 70: End If 71: => 72: If Not SUP.AutoFocus(CT.RightAscension, CT.Declination) Then ^ 73: Console.PrintLine "***AutoFocus failed." 74: End If 75: -- end -- 25-Oct-2014 01:23:33.1: ** Autofocus failed (n=2), will retry ASAP after 5 min. 25-Oct-2014 01:23:34.7: Dispatcher cycle time: 1.123202 sec. 25-Oct-2014 01:23:34.7: Acquire data for Observation V849_Her... 25-Oct-2014 01:23:34.7: (belongs to Project Walker, Plan V849_Her) 25-Oct-2014 01:23:34.7: Send Observation V849_Her to ACP Sequencer 25-Oct-2014 01:25:27.3: ACP data acquisition failed for Observation V849_Her. 25-Oct-2014 01:25:27.3: (Observation V849_Her interrupted by acquisition process failure.) 25-Oct-2014 01:25:33.9: Dispatcher cycle time: 0.9360016 sec. 25-Oct-2014 01:25:33.9: Acquire data for Observation V1404_Cyg... 25-Oct-2014 01:25:33.9: (belongs to Project Walker, Plan V1404_Cyg) 25-Oct-2014 01:25:33.9: Send Observation V1404_Cyg to ACP Sequencer 25-Oct-2014 01:27:57.3: ACP data acquisition failed for Observation V1404_Cyg. 25-Oct-2014 01:27:57.3: (Observation V1404_Cyg interrupted by acquisition process failure.) 25-Oct-2014 01:27:58.4: Dispatcher cycle time: 0.592801 sec. 25-Oct-2014 01:27:58.4: Acquire data for Observation NGC_7790... 25-Oct-2014 01:27:58.4: (belongs to Project AAVSO_Monitoring, Plan NGC_7790) 25-Oct-2014 01:27:58.4: Doing 3 sets 25-Oct-2014 01:27:58.7: Send Observation NGC_7790 to ACP Sequencer 25-Oct-2014 01:30:01.0: ACP data acquisition failed for Observation NGC_7790. 25-Oct-2014 01:30:01.0: (Observation NGC_7790 interrupted by acquisition process failure.) 25-Oct-2014 01:30:07.7: ++ Auto Focus ++ 25-Oct-2014 01:30:07.7: Doing periodic autofocus. 25-Oct-2014 01:30:07.7: Start special ACP AutoFocus script for scheduler 25-Oct-2014 01:31:56.9: ** Sequencer script "AutoFocusScheduler" failed: 25-Oct-2014 01:31:56.9: **Script Error (Tracking has been stopped)** Source: MaxIm.CCDCamera Message: **Failed to start the exposure at line 72 column 2. Script Context: 69: Call SUP.WaitForSlew() 70: End If 71: => 72: If Not SUP.AutoFocus(CT.RightAscension, CT.Declination) Then ^ 73: Console.PrintLine "***AutoFocus failed." 74: End If 75: -- end -- 25-Oct-2014 01:31:56.9: ** Autofocus failed (n=3), will retry ASAP after 10 min. 25-Oct-2014 01:31:59.7: Dispatcher cycle time: 0.9048016 sec. 25-Oct-2014 01:31:59.7: Acquire data for Observation V2468_Cyg... 25-Oct-2014 01:31:59.7: (belongs to Project Nova_Monitoring, Plan V2468_Cyg) 25-Oct-2014 01:31:59.7: Send Observation V2468_Cyg to ACP Sequencer 25-Oct-2014 01:33:50.7: ACP data acquisition failed for Observation V2468_Cyg. 25-Oct-2014 01:33:50.7: (Observation V2468_Cyg interrupted by acquisition process failure.) 25-Oct-2014 01:33:55.4: Dispatcher cycle time: 1.2792023 sec. 25-Oct-2014 01:33:55.4: Acquire data for Observation V1722_Aql... 25-Oct-2014 01:33:55.4: (belongs to Project Nova_Monitoring, Plan V1722_Aql) 25-Oct-2014 01:33:55.4: Send Observation V1722_Aql to ACP Sequencer 25-Oct-2014 01:35:42.3: ACP data acquisition failed for Observation V1722_Aql. 25-Oct-2014 01:35:42.3: (Observation V1722_Aql interrupted by acquisition process failure.) 25-Oct-2014 01:35:43.6: Dispatcher cycle time: 0.5460009 sec. 25-Oct-2014 01:35:43.6: Acquire data for Observation V1721_Aql... 25-Oct-2014 01:35:43.6: (belongs to Project Nova_Monitoring, Plan V1721_Aql) 25-Oct-2014 01:35:43.6: Send Observation V1721_Aql to ACP Sequencer 25-Oct-2014 01:37:02.0: ACP data acquisition failed for Observation V1721_Aql. 25-Oct-2014 01:37:02.0: (Observation V1721_Aql interrupted by acquisition process failure.) 25-Oct-2014 01:37:10.1: Dispatcher cycle time: 0.8580015 sec. 25-Oct-2014 01:37:10.1: Acquire data for Observation V2491_Cyg... 25-Oct-2014 01:37:10.1: (belongs to Project Nova_Monitoring, Plan V2491_Cyg) 25-Oct-2014 01:37:10.1: Send Observation V2491_Cyg to ACP Sequencer 25-Oct-2014 01:39:00.9: ACP data acquisition failed for Observation V2491_Cyg. 25-Oct-2014 01:39:00.9: (Observation V2491_Cyg interrupted by acquisition process failure.) 25-Oct-2014 01:39:09.5: Dispatcher cycle time: 0.8580015 sec. 25-Oct-2014 01:39:09.5: Acquire data for Observation V1724_Aql... 25-Oct-2014 01:39:09.5: (belongs to Project Nova_Monitoring, Plan V1724_Aql) 25-Oct-2014 01:39:09.6: Send Observation V1724_Aql to ACP Sequencer 25-Oct-2014 01:41:05.6: ACP data acquisition failed for Observation V1724_Aql. 25-Oct-2014 01:41:05.6: (Observation V1724_Aql interrupted by acquisition process failure.) 25-Oct-2014 01:41:13.1: Dispatcher cycle time: 0.4836008 sec. 25-Oct-2014 01:41:13.1: Acquire data for Observation NGC_6934... 25-Oct-2014 01:41:13.1: (belongs to Project Welch_gc, Plan NGC_6934) 25-Oct-2014 01:41:13.2: Send Observation NGC_6934 to ACP Sequencer 25-Oct-2014 01:43:08.9: ACP data acquisition failed for Observation NGC_6934. 25-Oct-2014 01:43:08.9: (Observation NGC_6934 interrupted by acquisition process failure.) 25-Oct-2014 01:43:10.1: ++ Auto Focus ++ 25-Oct-2014 01:43:10.1: Doing periodic autofocus. 25-Oct-2014 01:43:10.1: Start special ACP AutoFocus script for scheduler 25-Oct-2014 01:44:38.5: ** Sequencer script "AutoFocusScheduler" failed: 25-Oct-2014 01:44:38.5: **Script Error (Tracking has been stopped)** Source: MaxIm.CCDCamera Message: **Failed to start the exposure at line 72 column 2. Script Context: 69: Call SUP.WaitForSlew() 70: End If 71: => 72: If Not SUP.AutoFocus(CT.RightAscension, CT.Declination) Then ^ 73: Console.PrintLine "***AutoFocus failed." 74: End If 75: -- end -- 25-Oct-2014 01:44:38.5: ** Autofocus failed (n=4), will retry ASAP after 15 min. 25-Oct-2014 01:44:40.9: Dispatcher cycle time: 0.4680008 sec. 25-Oct-2014 01:44:40.9: Acquire data for Observation V1723_Aql... 25-Oct-2014 01:44:40.9: (belongs to Project Nova_Monitoring, Plan V1723_Aql) 25-Oct-2014 01:44:41.3: Send Observation V1723_Aql to ACP Sequencer 25-Oct-2014 01:46:41.6: ACP data acquisition failed for Observation V1723_Aql. 25-Oct-2014 01:46:41.6: (Observation V1723_Aql interrupted by acquisition process failure.) 25-Oct-2014 01:46:52.7: Dispatcher cycle time: 0.8112014 sec. 25-Oct-2014 01:46:52.7: Acquire data for Observation NGC_6981... 25-Oct-2014 01:46:52.7: (belongs to Project Welch_gc, Plan NGC_6981) 25-Oct-2014 01:46:52.7: Send Observation NGC_6981 to ACP Sequencer 25-Oct-2014 01:48:52.8: ACP data acquisition failed for Observation NGC_6981. 25-Oct-2014 01:48:52.8: (Observation NGC_6981 interrupted by acquisition process failure.) 25-Oct-2014 01:48:54.3: Dispatcher cycle time: 0.4524008 sec. 25-Oct-2014 01:48:54.3: Acquire data for Observation V496_Sct... 25-Oct-2014 01:48:54.3: (belongs to Project Nova_Monitoring, Plan V496_Sct) 25-Oct-2014 01:48:54.3: Send Observation V496_Sct to ACP Sequencer 25-Oct-2014 01:50:54.7: ACP data acquisition failed for Observation V496_Sct. 25-Oct-2014 01:50:54.7: (Observation V496_Sct interrupted by acquisition process failure.) 25-Oct-2014 01:51:01.6: Dispatcher cycle time: 0.7956014 sec. 25-Oct-2014 01:51:01.6: Acquire data for Observation FG_Sge... 25-Oct-2014 01:51:01.6: (belongs to Project Mogul_Mira, Plan FG_Sge) 25-Oct-2014 01:51:01.6: Send Observation FG_Sge to ACP Sequencer 25-Oct-2014 01:52:56.4: ACP data acquisition failed for Observation FG_Sge. 25-Oct-2014 01:52:56.4: (Observation FG_Sge interrupted by acquisition process failure.) 25-Oct-2014 01:52:57.6: Dispatcher cycle time: 0.4368008 sec. 25-Oct-2014 01:52:57.6: Acquire data for Observation ST_Sge... 25-Oct-2014 01:52:57.6: (belongs to Project Mogul_Mira, Plan ST_Sge) 25-Oct-2014 01:52:57.6: Send Observation ST_Sge to ACP Sequencer 25-Oct-2014 01:54:33.7: ACP data acquisition failed for Observation ST_Sge. 25-Oct-2014 01:54:33.7: (Observation ST_Sge interrupted by acquisition process failure.) 25-Oct-2014 01:54:44.5: Dispatcher cycle time: 0.7488014 sec. 25-Oct-2014 01:54:44.5: Acquire data for Observation NGC_7006... 25-Oct-2014 01:54:44.5: (belongs to Project Welch_gc, Plan NGC_7006) 25-Oct-2014 01:54:44.5: Send Observation NGC_7006 to ACP Sequencer 25-Oct-2014 01:56:32.6: ACP data acquisition failed for Observation NGC_7006. 25-Oct-2014 01:56:32.6: (Observation NGC_7006 interrupted by acquisition process failure.) 25-Oct-2014 01:56:40.4: Dispatcher cycle time: 0.7176013 sec. 25-Oct-2014 01:56:40.4: Acquire data for Observation SW_Aql... 25-Oct-2014 01:56:40.4: (belongs to Project Mogul_Mira, Plan SW_Aql) 25-Oct-2014 01:56:40.4: Send Observation SW_Aql to ACP Sequencer 25-Oct-2014 01:58:34.1: ACP data acquisition failed for Observation SW_Aql. 25-Oct-2014 01:58:34.1: (Observation SW_Aql interrupted by acquisition process failure.) 25-Oct-2014 01:58:41.4: Dispatcher cycle time: 0.3900007 sec. 25-Oct-2014 01:58:41.4: Acquire data for Observation NGC_6838... 25-Oct-2014 01:58:41.4: (belongs to Project Welch_gc, Plan NGC_6838) 25-Oct-2014 01:58:41.4: Send Observation NGC_6838 to ACP Sequencer 25-Oct-2014 02:00:21.6: ACP data acquisition failed for Observation NGC_6838. 25-Oct-2014 02:00:21.6: (Observation NGC_6838 interrupted by acquisition process failure.) 25-Oct-2014 02:00:28.3: ++ Auto Focus ++ 25-Oct-2014 02:00:28.3: Doing periodic autofocus. 25-Oct-2014 02:00:28.3: Start special ACP AutoFocus script for scheduler 25-Oct-2014 02:01:34.5: ** Sequencer script "AutoFocusScheduler" failed: 25-Oct-2014 02:01:34.5: **Script Error (Tracking has been stopped)** Source: MaxIm.CCDCamera Message: **Failed to start the exposure at line 72 column 2. Script Context: 69: Call SUP.WaitForSlew() 70: End If 71: => 72: If Not SUP.AutoFocus(CT.RightAscension, CT.Declination) Then ^ 73: Console.PrintLine "***AutoFocus failed." 74: End If 75: -- end -- 25-Oct-2014 02:01:34.5: ** Autofocus failed (n=5), will retry ASAP after 20 min. 25-Oct-2014 02:01:37.3: Dispatcher cycle time: 0.7644014 sec. 25-Oct-2014 02:01:37.3: Acquire data for Observation TU_Aql... 25-Oct-2014 02:01:37.3: (belongs to Project Mogul_Mira, Plan TU_Aql) 25-Oct-2014 02:01:37.3: Send Observation TU_Aql to ACP Sequencer 25-Oct-2014 02:03:29.8: ACP data acquisition failed for Observation TU_Aql. 25-Oct-2014 02:03:29.8: (Observation TU_Aql interrupted by acquisition process failure.) 25-Oct-2014 02:03:40.7: Dispatcher cycle time: 0.7332013 sec. 25-Oct-2014 02:03:40.7: Acquire data for Observation RR_Equ... 25-Oct-2014 02:03:40.7: (belongs to Project Mogul_Mira, Plan RR_Equ) 25-Oct-2014 02:03:40.8: Send Observation RR_Equ to ACP Sequencer 25-Oct-2014 02:05:40.2: ACP data acquisition failed for Observation RR_Equ. 25-Oct-2014 02:05:40.2: (Observation RR_Equ interrupted by acquisition process failure.) 25-Oct-2014 02:05:51.6: Dispatcher cycle time: 0.7644014 sec. 25-Oct-2014 02:05:51.6: Acquire data for Observation X_Dra... 25-Oct-2014 02:05:51.6: (belongs to Project Mogul_Mira, Plan X_Dra) 25-Oct-2014 02:05:51.6: Send Observation X_Dra to ACP Sequencer 25-Oct-2014 02:08:17.8: ACP data acquisition failed for Observation X_Dra. 25-Oct-2014 02:08:17.8: (Observation X_Dra interrupted by acquisition process failure.) 25-Oct-2014 02:08:29.3: Dispatcher cycle time: 0.7176013 sec. 25-Oct-2014 02:08:29.3: Acquire data for Observation RR_Aqr... 25-Oct-2014 02:08:29.3: (belongs to Project Mogul_Mira, Plan RR_Aqr) 25-Oct-2014 02:08:29.3: Send Observation RR_Aqr to ACP Sequencer 25-Oct-2014 02:10:55.3: ACP data acquisition failed for Observation RR_Aqr. 25-Oct-2014 02:10:55.3: (Observation RR_Aqr interrupted by acquisition process failure.) 25-Oct-2014 02:11:01.6: Dispatcher cycle time: 0.3588007 sec. 25-Oct-2014 02:11:01.6: Acquire data for Observation YZ_Vul... 25-Oct-2014 02:11:01.6: (belongs to Project Mogul_Mira, Plan YZ_Vul) 25-Oct-2014 02:11:01.6: Send Observation YZ_Vul to ACP Sequencer 25-Oct-2014 02:12:57.0: ACP data acquisition failed for Observation YZ_Vul. 25-Oct-2014 02:12:57.0: (Observation YZ_Vul interrupted by acquisition process failure.) 25-Oct-2014 02:13:06.0: Dispatcher cycle time: 0.7176013 sec. 25-Oct-2014 02:13:06.0: Acquire data for Observation WZ_Lyr... 25-Oct-2014 02:13:06.0: (belongs to Project Mogul_Mira, Plan WZ_Lyr) 25-Oct-2014 02:13:06.0: Send Observation WZ_Lyr to ACP Sequencer 25-Oct-2014 02:15:00.8: ACP data acquisition failed for Observation WZ_Lyr. 25-Oct-2014 02:15:00.8: (Observation WZ_Lyr interrupted by acquisition process failure.) 25-Oct-2014 02:15:02.7: Dispatcher cycle time: 0.3588007 sec. 25-Oct-2014 02:15:02.7: Acquire data for Observation ST_Lyr... 25-Oct-2014 02:15:02.7: (belongs to Project Mogul_Mira, Plan ST_Lyr) 25-Oct-2014 02:15:02.7: Send Observation ST_Lyr to ACP Sequencer 25-Oct-2014 02:16:40.2: ACP data acquisition failed for Observation ST_Lyr. 25-Oct-2014 02:16:40.2: (Observation ST_Lyr interrupted by acquisition process failure.) 25-Oct-2014 02:16:42.1: Dispatcher cycle time: 0.3588006 sec. 25-Oct-2014 02:16:42.1: Acquire data for Observation NGC_6760... 25-Oct-2014 02:16:42.1: (belongs to Project Welch_gc, Plan NGC_6760) 25-Oct-2014 02:16:42.1: Send Observation NGC_6760 to ACP Sequencer 25-Oct-2014 02:18:41.6: ACP data acquisition failed for Observation NGC_6760. 25-Oct-2014 02:18:41.6: (Observation NGC_6760 interrupted by acquisition process failure.) 25-Oct-2014 02:18:47.1: Dispatcher cycle time: 0.2964005 sec. 25-Oct-2014 02:18:47.1: Acquire data for Observation Pal_10... 25-Oct-2014 02:18:47.1: (belongs to Project Welch_gc, Plan Pal_10) 25-Oct-2014 02:18:47.1: Send Observation Pal_10 to ACP Sequencer 25-Oct-2014 02:20:35.6: ACP data acquisition failed for Observation Pal_10. 25-Oct-2014 02:20:35.6: (Observation Pal_10 interrupted by acquisition process failure.) 25-Oct-2014 02:20:42.5: Dispatcher cycle time: 0.2964005 sec. 25-Oct-2014 02:20:42.5: Acquire data for Observation NGC_6712... 25-Oct-2014 02:20:42.5: (belongs to Project Welch_gc, Plan NGC_6712) 25-Oct-2014 02:20:42.5: Send Observation NGC_6712 to ACP Sequencer 25-Oct-2014 02:22:31.4: ACP data acquisition failed for Observation NGC_6712. 25-Oct-2014 02:22:31.4: (Observation NGC_6712 interrupted by acquisition process failure.) 25-Oct-2014 02:22:39.7: ++ Auto Focus ++ 25-Oct-2014 02:22:39.7: Doing periodic autofocus. 25-Oct-2014 02:22:39.7: Start special ACP AutoFocus script for scheduler 25-Oct-2014 02:24:38.8: ** Sequencer script "AutoFocusScheduler" failed: 25-Oct-2014 02:24:38.8: **Script Error (Tracking has been stopped)** Source: MaxIm.CCDCamera Message: **Failed to start the exposure at line 72 column 2. Script Context: 69: Call SUP.WaitForSlew() 70: End If 71: => 72: If Not SUP.AutoFocus(CT.RightAscension, CT.Declination) Then ^ 73: Console.PrintLine "***AutoFocus failed." 74: End If 75: -- end -- 25-Oct-2014 02:24:38.8: ** Autofocus failed (n=6), will retry ASAP after 20 min. 25-Oct-2014 02:24:41.4: Dispatcher cycle time: 0.592801 sec. 25-Oct-2014 02:24:41.4: Acquire data for Observation NGC_7078... 25-Oct-2014 02:24:41.4: (belongs to Project Welch_gc, Plan NGC_7078) 25-Oct-2014 02:24:41.4: Send Observation NGC_7078 to ACP Sequencer 25-Oct-2014 02:26:39.6: ACP data acquisition failed for Observation NGC_7078. 25-Oct-2014 02:26:39.6: (Observation NGC_7078 interrupted by acquisition process failure.) 25-Oct-2014 02:26:50.7: Dispatcher cycle time: 0.2340004 sec. 25-Oct-2014 02:26:50.7: Acquire data for Observation NGC_7089... 25-Oct-2014 02:26:50.7: (belongs to Project Welch_gc, Plan NGC_7089) 25-Oct-2014 02:26:50.7: Send Observation NGC_7089 to ACP Sequencer 25-Oct-2014 02:28:31.8: ACP data acquisition failed for Observation NGC_7089. 25-Oct-2014 02:28:31.8: (Observation NGC_7089 interrupted by acquisition process failure.) 25-Oct-2014 02:28:32.3: Dispatcher cycle time: 0.2340004 sec. 25-Oct-2014 02:28:32.3: Acquire data for Observation NGC_6779... 25-Oct-2014 02:28:32.3: (belongs to Project Welch_gc, Plan NGC_6779) 25-Oct-2014 02:28:32.3: Send Observation NGC_6779 to ACP Sequencer 25-Oct-2014 02:30:41.4: ACP data acquisition failed for Observation NGC_6779. 25-Oct-2014 02:30:41.4: (Observation NGC_6779 interrupted by acquisition process failure.) 25-Oct-2014 02:30:48.8: Dispatcher cycle time: 0.561601 sec. 25-Oct-2014 02:30:48.8: Acquire data for Observation UU_Lyr... 25-Oct-2014 02:30:48.8: (belongs to Project Mogul_Mira, Plan UU_Lyr) 25-Oct-2014 02:30:48.8: Send Observation UU_Lyr to ACP Sequencer 25-Oct-2014 02:32:27.7: ACP data acquisition failed for Observation UU_Lyr. 25-Oct-2014 02:32:27.7: (Observation UU_Lyr interrupted by acquisition process failure.) 25-Oct-2014 02:32:35.7: Dispatcher cycle time: 0.5460009 sec. 25-Oct-2014 02:32:35.7: Acquire data for Observation V0809_Cep... 25-Oct-2014 02:32:35.7: (belongs to Project Nova_Monitoring, Plan V0809_Cep) 25-Oct-2014 02:32:35.7: Send Observation V0809_Cep to ACP Sequencer 25-Oct-2014 02:34:59.8: ACP data acquisition failed for Observation V0809_Cep. 25-Oct-2014 02:34:59.8: (Observation V0809_Cep interrupted by acquisition process failure.) 25-Oct-2014 02:35:04.4: Dispatcher cycle time: 0.2184004 sec. 25-Oct-2014 02:35:04.4: Acquire data for Observation GSC_3649-0825... 25-Oct-2014 02:35:04.4: (belongs to Project Staels, Plan GSC_3649-0825) 25-Oct-2014 02:35:04.5: Send Observation GSC_3649-0825 to ACP Sequencer 25-Oct-2014 02:36:41.2: ACP data acquisition failed for Observation GSC_3649-0825. 25-Oct-2014 02:36:41.2: (Observation GSC_3649-0825 interrupted by acquisition process failure.) 25-Oct-2014 02:36:52.3: Dispatcher cycle time: 0.1716003 sec. 25-Oct-2014 02:36:52.3: Acquire data for Observation 2MASS_23275353+5214532... 25-Oct-2014 02:36:52.3: (belongs to Project Staels, Plan 2MASS_23275353+5214532) 25-Oct-2014 02:36:52.3: Send Observation 2MASS_23275353+5214532 to ACP Sequencer 25-Oct-2014 02:38:26.2: ACP data acquisition failed for Observation 2MASS_23275353+5214532. 25-Oct-2014 02:38:26.2: (Observation 2MASS_23275353+5214532 interrupted by acquisition process failure.) 25-Oct-2014 02:38:37.4: Dispatcher cycle time: 0.5148009 sec. 25-Oct-2014 02:38:37.4: Acquire data for Observation LX_Cyg... 25-Oct-2014 02:38:37.4: (belongs to Project Mogul_Mira, Plan LX_Cyg) 25-Oct-2014 02:38:37.4: Send Observation LX_Cyg to ACP Sequencer 25-Oct-2014 02:40:31.6: ACP data acquisition failed for Observation LX_Cyg. 25-Oct-2014 02:40:31.6: (Observation LX_Cyg interrupted by acquisition process failure.) 25-Oct-2014 02:40:42.2: Dispatcher cycle time: 0.1560002 sec. 25-Oct-2014 02:40:42.2: Acquire data for Observation DG_Peg... 25-Oct-2014 02:40:42.2: (belongs to Project Mogul_Mira, Plan DG_Peg) 25-Oct-2014 02:40:42.5: Send Observation DG_Peg to ACP Sequencer 25-Oct-2014 02:42:49.1: ACP data acquisition failed for Observation DG_Peg. 25-Oct-2014 02:42:49.1: (Observation DG_Peg interrupted by acquisition process failure.) 25-Oct-2014 02:42:55.5: Dispatcher cycle time: 0.1404002 sec. 25-Oct-2014 02:42:55.5: Acquire data for Observation NGC_7492... 25-Oct-2014 02:42:55.5: (belongs to Project Welch_gc, Plan NGC_7492) 25-Oct-2014 02:42:55.5: Send Observation NGC_7492 to ACP Sequencer 25-Oct-2014 02:44:45.2: ACP data acquisition failed for Observation NGC_7492. 25-Oct-2014 02:44:45.2: (Observation NGC_7492 interrupted by acquisition process failure.) 25-Oct-2014 02:44:49.4: ++ Auto Focus ++ 25-Oct-2014 02:44:49.4: Doing periodic autofocus. 25-Oct-2014 02:44:49.4: Start special ACP AutoFocus script for scheduler 25-Oct-2014 02:46:29.3: ** Sequencer script "AutoFocusScheduler" failed: 25-Oct-2014 02:46:29.3: **Script Error (Tracking has been stopped)** Source: MaxIm.CCDCamera Message: **Failed to start the exposure at line 72 column 2. Script Context: 69: Call SUP.WaitForSlew() 70: End If 71: => 72: If Not SUP.AutoFocus(CT.RightAscension, CT.Declination) Then ^ 73: Console.PrintLine "***AutoFocus failed." 74: End If 75: -- end -- 25-Oct-2014 02:46:29.3: ** Autofocus failed (n=7), will retry ASAP after 20 min. 25-Oct-2014 02:46:31.1: Dispatcher cycle time: 0.1092002 sec. 25-Oct-2014 02:46:31.1: Acquire data for Observation Z_Lyr... 25-Oct-2014 02:46:31.1: (belongs to Project Mogul_Mira, Plan Z_Lyr) 25-Oct-2014 02:46:31.5: Send Observation Z_Lyr to ACP Sequencer 25-Oct-2014 02:48:38.6: ACP data acquisition failed for Observation Z_Lyr. 25-Oct-2014 02:48:38.6: (Observation Z_Lyr interrupted by acquisition process failure.) 25-Oct-2014 02:48:46.5: Dispatcher cycle time: 0.0936001 sec. 25-Oct-2014 02:48:46.5: Acquire data for Observation Pal_13... 25-Oct-2014 02:48:46.5: (belongs to Project Welch_gc, Plan Pal_13) 25-Oct-2014 02:48:46.5: Send Observation Pal_13 to ACP Sequencer 25-Oct-2014 02:51:11.3: ACP data acquisition failed for Observation Pal_13. 25-Oct-2014 02:51:11.3: (Observation Pal_13 interrupted by acquisition process failure.) 25-Oct-2014 02:51:13.0: Dispatcher cycle time: 0.0936002 sec. 25-Oct-2014 02:51:13.0: Acquire data for Observation SV_And... 25-Oct-2014 02:51:13.0: (belongs to Project Mogul_Mira, Plan SV_And) 25-Oct-2014 02:51:13.0: Send Observation SV_And to ACP Sequencer 25-Oct-2014 02:53:05.5: ACP data acquisition failed for Observation SV_And. 25-Oct-2014 02:53:05.5: (Observation SV_And interrupted by acquisition process failure.) 25-Oct-2014 02:53:12.9: Dispatcher cycle time: 0.0624001 sec. 25-Oct-2014 02:53:12.9: Acquire data for Observation SN_2013dy... 25-Oct-2014 02:53:12.9: (belongs to Project AAVSO_Monitoring, Plan SN_2013dy) 25-Oct-2014 02:53:12.9: Send Observation SN_2013dy to ACP Sequencer 25-Oct-2014 08:58:26.3: ** Sequencer script "AcquireScheduler" failed: 25-Oct-2014 08:58:26.3: **Script Error (Tracking has been stopped)** Source: MaxIm DL 5 Message: Image Not Available at line 1531 column 5. Script Context: 1528: End If 1529: End If 1530: => 1531: If Not SUP.AutoGuide(True) Then ^ 1532: If Not IMG Is Nothing Then 1533: If IMG.ExposureInterval > Prefs.AutoGuiding.MaxUnguidedExposureInterval Then 1534: If STRICT_AUTOGUIDING And Not PLN.BestEfforts Then -- end -- 25-Oct-2014 08:58:29.4: ACP ERROR: Run failed due to script error (see ACP run log) 25-Oct-2014 08:58:29.4: ACP data acquisition failed for Observation SN_2013dy. 25-Oct-2014 08:58:29.4: (Observation SN_2013dy interrupted by acquisition process failure.) 25-Oct-2014 08:58:35.9: Open the observatory dome/roof 25-Oct-2014 08:59:32.8: ++ Auto Focus ++ 25-Oct-2014 08:59:32.8: Doing initial autofocus. 25-Oct-2014 08:59:32.8: Start special ACP AutoFocus script for scheduler 25-Oct-2014 08:59:48.9: ** Sequencer script "AutoFocusScheduler" failed: 25-Oct-2014 08:59:48.9: **Script Error (Tracking has been stopped)** Source: MaxIm DL 5 Message: Could Not Initialize Camera at line 38 column 5. Script Context: 35: Dim Filt, dtStart, buf, CT 36: 37: Set SUP = CreateObject("ACP.AcquireSupport") => 38: SUP.Initialize ^ 39: 40: dtStart = Util.SysUTCDate 41: buf = "AutoFocus-" & Util.FormatVar(dtStart, "dd-mmm-yyyy@HhNnSs") & ".log" ' Typical Log Name -- end -- 25-Oct-2014 08:59:48.9: ** Autofocus failed (n=8), will retry ASAP after 20 min. 25-Oct-2014 08:59:51.6: Dispatcher cycle time: 0.6240011 sec. 25-Oct-2014 08:59:51.6: Acquire data for Observation SDSS073224... 25-Oct-2014 08:59:51.6: (belongs to Project AGN, Plan SDSS073224) 25-Oct-2014 08:59:51.6: Send Observation SDSS073224 to ACP Sequencer 25-Oct-2014 09:00:06.7: ** Sequencer script "AcquireScheduler" failed: 25-Oct-2014 09:00:06.7: **Script Error (Tracking has been stopped)** Source: MaxIm DL 5 Message: Could Not Initialize Camera at line 792 column 5. Script Context: 789: ' Support library 790: ' 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here => 792: Call SUP.Initialize() ' Do initialization (may log) ^ 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory 795: -- end -- 25-Oct-2014 09:00:09.8: ACP ERROR: Run failed due to script error (see ACP run log) 25-Oct-2014 09:00:09.8: ACP data acquisition failed for Observation SDSS073224. 25-Oct-2014 09:00:09.8: (Observation SDSS073224 interrupted by acquisition process failure.) 25-Oct-2014 09:00:15.0: Dispatcher cycle time: 0.4212007 sec. 25-Oct-2014 09:00:15.0: Acquire data for Observation IC_348... 25-Oct-2014 09:00:15.0: (belongs to Project Staels, Plan IC_348) 25-Oct-2014 09:00:15.4: Send Observation IC_348 to ACP Sequencer 25-Oct-2014 09:00:30.4: ** Sequencer script "AcquireScheduler" failed: 25-Oct-2014 09:00:30.4: **Script Error (Tracking has been stopped)** Source: MaxIm DL 5 Message: Could Not Initialize Camera at line 792 column 5. Script Context: 789: ' Support library 790: ' 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here => 792: Call SUP.Initialize() ' Do initialization (may log) ^ 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory 795: -- end -- 25-Oct-2014 09:00:33.5: ACP ERROR: Run failed due to script error (see ACP run log) 25-Oct-2014 09:00:33.5: ACP data acquisition failed for Observation IC_348. 25-Oct-2014 09:00:33.5: (Observation IC_348 interrupted by acquisition process failure.) 25-Oct-2014 09:00:40.2: Dispatcher cycle time: 0.577201 sec. 25-Oct-2014 09:00:40.2: Acquire data for Observation V0965_Per... 25-Oct-2014 09:00:40.2: (belongs to Project Nova_Monitoring, Plan V0965_Per) 25-Oct-2014 09:00:40.2: Send Observation V0965_Per to ACP Sequencer 25-Oct-2014 09:00:57.2: ** Sequencer script "AcquireScheduler" failed: 25-Oct-2014 09:00:57.2: **Script Error (Tracking has been stopped)** Source: MaxIm DL 5 Message: Could Not Initialize Camera at line 792 column 5. Script Context: 789: ' Support library 790: ' 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here => 792: Call SUP.Initialize() ' Do initialization (may log) ^ 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory 795: -- end -- 25-Oct-2014 09:01:00.2: ACP ERROR: Run failed due to script error (see ACP run log) 25-Oct-2014 09:01:00.2: ACP data acquisition failed for Observation V0965_Per. 25-Oct-2014 09:01:00.2: (Observation V0965_Per interrupted by acquisition process failure.) 25-Oct-2014 09:01:01.2: Dispatcher cycle time: 0.2496004 sec. 25-Oct-2014 09:01:01.2: Acquire data for Observation KT_Eri... 25-Oct-2014 09:01:01.2: (belongs to Project Nova_Monitoring, Plan KT_Eri) 25-Oct-2014 09:01:01.2: Send Observation KT_Eri to ACP Sequencer 25-Oct-2014 09:01:16.3: ** Sequencer script "AcquireScheduler" failed: 25-Oct-2014 09:01:16.3: **Script Error (Tracking has been stopped)** Source: MaxIm DL 5 Message: Could Not Initialize Camera at line 792 column 5. Script Context: 789: ' Support library 790: ' 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here => 792: Call SUP.Initialize() ' Do initialization (may log) ^ 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory 795: -- end -- 25-Oct-2014 09:01:19.4: ACP ERROR: Run failed due to script error (see ACP run log) 25-Oct-2014 09:01:19.4: ACP data acquisition failed for Observation KT_Eri. 25-Oct-2014 09:01:19.4: (Observation KT_Eri interrupted by acquisition process failure.) 25-Oct-2014 09:01:26.0: Dispatcher cycle time: 0.2184004 sec. 25-Oct-2014 09:01:26.0: Acquire data for Observation SN_2013ej... 25-Oct-2014 09:01:26.0: (belongs to Project AAVSO_Monitoring, Plan SN_2013ej) 25-Oct-2014 09:01:26.0: Send Observation SN_2013ej to ACP Sequencer 25-Oct-2014 09:01:42.1: ** Sequencer script "AcquireScheduler" failed: 25-Oct-2014 09:01:42.1: **Script Error (Tracking has been stopped)** Source: MaxIm DL 5 Message: Could Not Initialize Camera at line 792 column 5. Script Context: 789: ' Support library 790: ' 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here => 792: Call SUP.Initialize() ' Do initialization (may log) ^ 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory 795: -- end -- 25-Oct-2014 09:01:45.2: ACP ERROR: Run failed due to script error (see ACP run log) 25-Oct-2014 09:01:45.2: ACP data acquisition failed for Observation SN_2013ej. 25-Oct-2014 09:01:45.2: (Observation SN_2013ej interrupted by acquisition process failure.) 25-Oct-2014 09:01:54.4: Dispatcher cycle time: 0.5460009 sec. 25-Oct-2014 09:01:54.4: Acquire data for Observation CB_32... 25-Oct-2014 09:01:54.4: (belongs to Project Staels, Plan CB_32) 25-Oct-2014 09:01:54.4: Send Observation CB_32 to ACP Sequencer 25-Oct-2014 09:02:10.0: ** Sequencer script "AcquireScheduler" failed: 25-Oct-2014 09:02:10.0: **Script Error (Tracking has been stopped)** Source: MaxIm DL 5 Message: Could Not Initialize Camera at line 792 column 5. Script Context: 789: ' Support library 790: ' 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here => 792: Call SUP.Initialize() ' Do initialization (may log) ^ 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory 795: -- end -- 25-Oct-2014 09:02:13.1: ACP ERROR: Run failed due to script error (see ACP run log) 25-Oct-2014 09:02:13.1: ACP data acquisition failed for Observation CB_32. 25-Oct-2014 09:02:13.1: (Observation CB_32 interrupted by acquisition process failure.) 25-Oct-2014 09:02:14.4: Dispatcher cycle time: 0.2184004 sec. 25-Oct-2014 09:02:14.4: Acquire data for Observation S_Ori... 25-Oct-2014 09:02:14.4: (belongs to Project Mogul_Mira, Plan S_Ori) 25-Oct-2014 09:02:14.4: Send Observation S_Ori to ACP Sequencer 25-Oct-2014 09:02:29.4: ** Sequencer script "AcquireScheduler" failed: 25-Oct-2014 09:02:29.4: **Script Error (Tracking has been stopped)** Source: MaxIm DL 5 Message: Could Not Initialize Camera at line 792 column 5. Script Context: 789: ' Support library 790: ' 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here => 792: Call SUP.Initialize() ' Do initialization (may log) ^ 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory 795: -- end -- 25-Oct-2014 09:02:32.5: ACP ERROR: Run failed due to script error (see ACP run log) 25-Oct-2014 09:02:32.5: ACP data acquisition failed for Observation S_Ori. 25-Oct-2014 09:02:32.5: (Observation S_Ori interrupted by acquisition process failure.) 25-Oct-2014 09:02:42.1: Dispatcher cycle time: 0.530401 sec. 25-Oct-2014 09:02:42.1: Acquire data for Observation V0959_Mon... 25-Oct-2014 09:02:42.1: (belongs to Project Nova_Monitoring, Plan V0959_Mon) 25-Oct-2014 09:02:42.1: Send Observation V0959_Mon to ACP Sequencer 25-Oct-2014 09:02:50.2: Dispatcher stopped at 25-Oct-2014 09:02:50 UTC 25-Oct-2014 09:02:50.2: **DISPATCHER INTERRUPT LEVEL 1 RECEIVED** 25-Oct-2014 09:02:57.4: ** Sequencer script "AcquireScheduler" failed: 25-Oct-2014 09:02:57.4: **Script Error (Tracking has been stopped)** Source: MaxIm DL 5 Message: Could Not Initialize Camera at line 792 column 5. Script Context: 789: ' Support library 790: ' 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here => 792: Call SUP.Initialize() ' Do initialization (may log) ^ 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory 795: -- end -- 25-Oct-2014 09:03:00.5: ACP ERROR: Run failed due to script error (see ACP run log) 25-Oct-2014 09:03:00.5: ACP data acquisition failed for Observation V0959_Mon. 25-Oct-2014 09:03:00.5: (Observation V0959_Mon interrupted by acquisition process failure.) 25-Oct-2014 17:41:07.2: -- Weather Unsafe -- 25-Oct-2014 18:02:09.5: ++ Weather Safe ++ 26-Oct-2014 01:31:20.3: Dispatcher started at 26-Oct-2014 01:31:20 UTC 26-Oct-2014 01:31:20.3: Priority: W[0]=1.00 26-Oct-2014 01:31:20.3: Transit Altitude: W[1]=0.70 26-Oct-2014 01:31:20.3: Highest Altitude: W[6]=0.00 26-Oct-2014 01:31:20.3: Lateness: W[5]=0.00 26-Oct-2014 01:31:20.3: Slew Distance: W[2]=0.30 26-Oct-2014 01:31:20.3: Retry Count: W[3]=0.20 26-Oct-2014 01:31:20.3: Meridian Crossing: W[4]=0.30 26-Oct-2014 01:31:20.3: Obs Conditions: W[7]=0.40 26-Oct-2014 01:31:20.3: Rising Plan Delay: disabled 26-Oct-2014 01:31:22.3: Run statistics: 26-Oct-2014 01:31:22.3: Observations: 130 26-Oct-2014 01:31:22.3: Considered: 77 26-Oct-2014 01:31:22.3: Completed: 1 26-Oct-2014 01:31:22.3: Skipped: 23 26-Oct-2014 01:31:22.3: Never Eligible: 53 26-Oct-2014 01:31:22.3: Failed: 53 Log closed at Sun, Oct 26 2014 01:31:22 UTC (actual time)