Log opened at Sun, May 04 2014 03:31:00 UTC (actual time) Current log level is Verbose Scheduler version 3.5.3 Multi-user license: Arne Henden 04-May-2014 03:31:00.4: Simulated clock initialized at 04-May-2014 03:31:00 UTC 04-May-2014 03:31:00.5: Loaded Constraint plugin AirMass 04-May-2014 03:31:00.5: Loaded Constraint plugin AirmassRange 04-May-2014 03:31:00.5: Loaded Constraint plugin Horizon 04-May-2014 03:31:00.5: Loaded Constraint plugin HourAngle 04-May-2014 03:31:00.5: Loaded Constraint plugin MoonAvoid 04-May-2014 03:31:00.5: Loaded Constraint plugin MoonDown 04-May-2014 03:31:00.5: Loaded Constraint plugin SkyCondition 04-May-2014 03:31:00.5: Loaded Constraint plugin TimeRange 04-May-2014 03:31:01.1: 133 plans are now pending. 04-May-2014 03:31:01.1: Attach ACP sequencer 04-May-2014 03:31:23.5: Weather successfully connected. Wait for valid data... 04-May-2014 03:31:42.7: Dispatcher started at 04-May-2014 03:31:42 UTC 04-May-2014 03:31:42.7: Priority: W[0]=1.00 04-May-2014 03:31:42.7: Transit Altitude: W[1]=0.70 04-May-2014 03:31:42.7: Highest Altitude: W[6]=0.00 04-May-2014 03:31:42.7: Lateness: W[5]=0.00 04-May-2014 03:31:42.7: Slew Distance: W[2]=0.30 04-May-2014 03:31:42.7: Retry Count: W[3]=0.20 04-May-2014 03:31:42.7: Meridian Crossing: W[4]=0.30 04-May-2014 03:31:42.7: Obs Conditions: W[7]=0.40 04-May-2014 03:31:42.7: Rising Plan Delay: disabled 04-May-2014 03:31:44.9: ++ Observatory Startup ++ 04-May-2014 03:31:44.9: Start ACP Sequencer's StartupObs script 04-May-2014 03:32:07.8: Open the observatory dome/roof 04-May-2014 03:33:19.3: ++ Auto Focus ++ 04-May-2014 03:33:19.3: Doing initial autofocus. 04-May-2014 03:33:19.3: Start special ACP AutoFocus script for scheduler 04-May-2014 03:33:34.8: ** Sequencer script "AutoFocusScheduler" failed: 04-May-2014 03:33:34.8: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 37 column 5. Script Context: 34: Sub Main() 35: Dim Filt, dtStart, buf, CT 36: => 37: Set SUP = CreateObject("ACP.AcquireSupport") ^ 38: SUP.Initialize 39: 40: dtStart = Util.SysUTCDate -- end -- 04-May-2014 03:33:34.8: ** Autofocus failed (n=1), will retry ASAP after 0 min. 04-May-2014 03:33:39.2: Plan SA84 has Monitor Mode. Time to resubmit it. 04-May-2014 03:33:39.2: Plan SA103 has Monitor Mode. Time to resubmit it. 04-May-2014 03:33:39.2: Plan V339_Del_TMO61 has Monitor Mode. Time to resubmit it. 04-May-2014 03:33:39.2: Plan RZ_Leo has Monitor Mode. Time to resubmit it. 04-May-2014 03:33:39.2: Plan PNV_J1902 has Monitor Mode. Time to resubmit it. 04-May-2014 03:33:39.2: Plan SDSS073224 has Monitor Mode. Time to resubmit it. 04-May-2014 03:33:39.2: Plan SN_2014G has Monitor Mode. Time to resubmit it. 04-May-2014 03:33:39.2: Plan SN_2014J has Monitor Mode. Time to resubmit it. 04-May-2014 03:33:39.2: Plan M56 has Monitor Mode. Time to resubmit it. 04-May-2014 03:33:39.2: Plan RR_Vir has Monitor Mode. Time to resubmit it. 04-May-2014 03:33:39.2: Plan Pal_4 has Monitor Mode. Time to resubmit it. 04-May-2014 03:33:39.3: Plan NGC_4147 has Monitor Mode. Time to resubmit it. 04-May-2014 03:33:39.3: Plan NGC_5053 has Monitor Mode. Time to resubmit it. 04-May-2014 03:33:39.3: Plan NGC_5272 has Monitor Mode. Time to resubmit it. 04-May-2014 03:33:40.7: Dispatcher cycle time: 3.8688068 sec. 04-May-2014 03:33:40.7: Acquire data for Observation SN_2014J... 04-May-2014 03:33:40.7: (belongs to Project AAVSO_Monitoring, Plan SN_2014J) 04-May-2014 03:33:40.7: Doing 3 sets 04-May-2014 03:33:40.7: Send Observation SN_2014J to ACP Sequencer 04-May-2014 03:33:55.9: ** Sequencer script "AcquireScheduler" failed: 04-May-2014 03:33:55.9: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 04-May-2014 03:33:59.0: ACP ERROR: Run failed due to script error (see ACP run log) 04-May-2014 03:33:59.0: ACP data acquisition failed for Observation SN_2014J. 04-May-2014 03:33:59.0: (Observation SN_2014J interrupted by acquisition process failure.) 04-May-2014 03:34:03.2: ++ Auto Focus ++ 04-May-2014 03:34:03.2: Doing periodic autofocus. 04-May-2014 03:34:03.2: Start special ACP AutoFocus script for scheduler 04-May-2014 03:34:18.5: ** Sequencer script "AutoFocusScheduler" failed: 04-May-2014 03:34:18.5: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 37 column 5. Script Context: 34: Sub Main() 35: Dim Filt, dtStart, buf, CT 36: => 37: Set SUP = CreateObject("ACP.AcquireSupport") ^ 38: SUP.Initialize 39: 40: dtStart = Util.SysUTCDate -- end -- 04-May-2014 03:34:18.5: ** Autofocus failed (n=2), will retry ASAP after 5 min. 04-May-2014 03:34:21.0: Dispatcher cycle time: 0.7176013 sec. 04-May-2014 03:34:21.0: Acquire data for Observation RZ_Leo... 04-May-2014 03:34:21.0: (belongs to Project Walker, Plan RZ_Leo) 04-May-2014 03:34:21.0: Send Observation RZ_Leo to ACP Sequencer 04-May-2014 03:34:37.0: ** Sequencer script "AcquireScheduler" failed: 04-May-2014 03:34:37.0: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 04-May-2014 03:34:40.0: ACP ERROR: Run failed due to script error (see ACP run log) 04-May-2014 03:34:40.0: ACP data acquisition failed for Observation RZ_Leo. 04-May-2014 03:34:40.0: (Observation RZ_Leo interrupted by acquisition process failure.) 04-May-2014 03:34:41.8: Dispatcher cycle time: 0.592801 sec. 04-May-2014 03:34:41.8: Acquire data for Observation SDSS073224... 04-May-2014 03:34:41.8: (belongs to Project AGN, Plan SDSS073224) 04-May-2014 03:34:41.8: Send Observation SDSS073224 to ACP Sequencer 04-May-2014 03:34:57.1: ** Sequencer script "AcquireScheduler" failed: 04-May-2014 03:34:57.1: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 04-May-2014 03:35:00.2: ACP ERROR: Run failed due to script error (see ACP run log) 04-May-2014 03:35:00.2: ACP data acquisition failed for Observation SDSS073224. 04-May-2014 03:35:00.2: (Observation SDSS073224 interrupted by acquisition process failure.) 04-May-2014 03:35:06.4: Dispatcher cycle time: 0.2496005 sec. 04-May-2014 03:35:06.4: Acquire data for Observation SA103... 04-May-2014 03:35:06.4: (belongs to Project Landolt_1, Plan SA103) 04-May-2014 03:35:06.4: Send Observation SA103 to ACP Sequencer 04-May-2014 03:35:21.9: ** Sequencer script "AcquireScheduler" failed: 04-May-2014 03:35:21.9: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 04-May-2014 03:35:25.0: ACP ERROR: Run failed due to script error (see ACP run log) 04-May-2014 03:35:25.0: ACP data acquisition failed for Observation SA103. 04-May-2014 03:35:25.0: (Observation SA103 interrupted by acquisition process failure.) 04-May-2014 03:35:34.9: Dispatcher cycle time: 0.561601 sec. 04-May-2014 03:35:34.9: Acquire data for Observation SN_2014G... 04-May-2014 03:35:34.9: (belongs to Project AAVSO_Monitoring, Plan SN_2014G) 04-May-2014 03:35:34.9: Send Observation SN_2014G to ACP Sequencer 04-May-2014 03:35:50.2: ** Sequencer script "AcquireScheduler" failed: 04-May-2014 03:35:50.2: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 04-May-2014 03:35:53.3: ACP ERROR: Run failed due to script error (see ACP run log) 04-May-2014 03:35:53.3: ACP data acquisition failed for Observation SN_2014G. 04-May-2014 03:35:53.3: (Observation SN_2014G interrupted by acquisition process failure.) 04-May-2014 03:36:02.8: Dispatcher cycle time: 0.2028003 sec. 04-May-2014 03:36:02.8: Acquire data for Observation Pal_4... 04-May-2014 03:36:02.8: (belongs to Project Welch_gc, Plan Pal_4) 04-May-2014 03:36:03.1: Send Observation Pal_4 to ACP Sequencer 04-May-2014 03:36:18.2: ** Sequencer script "AcquireScheduler" failed: 04-May-2014 03:36:18.2: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 04-May-2014 03:36:21.3: ACP ERROR: Run failed due to script error (see ACP run log) 04-May-2014 03:36:21.3: ACP data acquisition failed for Observation Pal_4. 04-May-2014 03:36:21.3: (Observation Pal_4 interrupted by acquisition process failure.) 04-May-2014 03:36:26.9: Dispatcher cycle time: 0.2028003 sec. 04-May-2014 03:36:26.9: Acquire data for Observation NGC_4147... 04-May-2014 03:36:26.9: (belongs to Project Welch_gc, Plan NGC_4147) 04-May-2014 03:36:26.9: Send Observation NGC_4147 to ACP Sequencer 04-May-2014 03:36:42.6: ** Sequencer script "AcquireScheduler" failed: 04-May-2014 03:36:42.6: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 04-May-2014 03:36:45.6: ACP ERROR: Run failed due to script error (see ACP run log) 04-May-2014 03:36:45.6: ACP data acquisition failed for Observation NGC_4147. 04-May-2014 03:36:45.6: (Observation NGC_4147 interrupted by acquisition process failure.) 04-May-2014 03:36:51.2: Dispatcher cycle time: 0.1872003 sec. 04-May-2014 03:36:51.2: Acquire data for Observation NGC_5024... 04-May-2014 03:36:51.2: (belongs to Project Welch_gc, Plan NGC_5024) 04-May-2014 03:36:51.2: Send Observation NGC_5024 to ACP Sequencer 04-May-2014 03:37:06.5: ** Sequencer script "AcquireScheduler" failed: 04-May-2014 03:37:06.5: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 04-May-2014 03:37:09.6: ACP ERROR: Run failed due to script error (see ACP run log) 04-May-2014 03:37:09.6: ACP data acquisition failed for Observation NGC_5024. 04-May-2014 03:37:09.6: (Observation NGC_5024 interrupted by acquisition process failure.) 04-May-2014 03:37:14.5: Dispatcher cycle time: 0.5148009 sec. 04-May-2014 03:37:14.5: Acquire data for Observation NGC_5053... 04-May-2014 03:37:14.5: (belongs to Project Welch_gc, Plan NGC_5053) 04-May-2014 03:37:14.5: Send Observation NGC_5053 to ACP Sequencer 04-May-2014 03:37:29.6: ** Sequencer script "AcquireScheduler" failed: 04-May-2014 03:37:29.6: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 04-May-2014 03:37:32.7: ACP ERROR: Run failed due to script error (see ACP run log) 04-May-2014 03:37:32.7: ACP data acquisition failed for Observation NGC_5053. 04-May-2014 03:37:32.7: (Observation NGC_5053 interrupted by acquisition process failure.) 04-May-2014 03:37:41.6: Dispatcher cycle time: 0.1716003 sec. 04-May-2014 03:37:41.6: Acquire data for Observation NGC_5272... 04-May-2014 03:37:41.6: (belongs to Project Welch_gc, Plan NGC_5272) 04-May-2014 03:37:42.0: Send Observation NGC_5272 to ACP Sequencer 04-May-2014 03:37:57.1: ** Sequencer script "AcquireScheduler" failed: 04-May-2014 03:37:57.1: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 04-May-2014 03:38:00.1: ACP ERROR: Run failed due to script error (see ACP run log) 04-May-2014 03:38:00.1: ACP data acquisition failed for Observation NGC_5272. 04-May-2014 03:38:00.1: (Observation NGC_5272 interrupted by acquisition process failure.) 04-May-2014 03:38:07.1: Dispatcher cycle time: 0.4992009 sec. 04-May-2014 03:38:07.1: Acquire data for Observation RR_Vir... 04-May-2014 03:38:07.1: (belongs to Project Mogul_Mira, Plan RR_Vir) 04-May-2014 03:38:07.1: Send Observation RR_Vir to ACP Sequencer 04-May-2014 03:38:22.3: ** Sequencer script "AcquireScheduler" failed: 04-May-2014 03:38:22.3: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 04-May-2014 03:38:25.4: ACP ERROR: Run failed due to script error (see ACP run log) 04-May-2014 03:38:25.4: ACP data acquisition failed for Observation RR_Vir. 04-May-2014 03:38:25.4: (Observation RR_Vir interrupted by acquisition process failure.) 04-May-2014 03:38:34.1: Dispatcher cycle time: 0.1404003 sec. 04-May-2014 03:38:34.1: Acquire data for Observation NGC_5466... 04-May-2014 03:38:34.1: (belongs to Project Welch_gc, Plan NGC_5466) 04-May-2014 03:38:34.4: Send Observation NGC_5466 to ACP Sequencer 04-May-2014 03:38:49.5: ** Sequencer script "AcquireScheduler" failed: 04-May-2014 03:38:49.5: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 04-May-2014 03:38:52.6: ACP ERROR: Run failed due to script error (see ACP run log) 04-May-2014 03:38:52.6: ACP data acquisition failed for Observation NGC_5466. 04-May-2014 03:38:52.6: (Observation NGC_5466 interrupted by acquisition process failure.) 04-May-2014 03:38:57.3: Dispatcher cycle time: 0.4680008 sec. 04-May-2014 03:38:57.3: Acquire data for Observation NGC_5634... 04-May-2014 03:38:57.3: (belongs to Project Welch_gc, Plan NGC_5634) 04-May-2014 03:38:57.3: Send Observation NGC_5634 to ACP Sequencer 04-May-2014 03:39:12.9: ** Sequencer script "AcquireScheduler" failed: 04-May-2014 03:39:12.9: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 04-May-2014 03:39:16.0: ACP ERROR: Run failed due to script error (see ACP run log) 04-May-2014 03:39:16.0: ACP data acquisition failed for Observation NGC_5634. 04-May-2014 03:39:16.0: (Observation NGC_5634 interrupted by acquisition process failure.) 04-May-2014 03:39:19.9: ++ Auto Focus ++ 04-May-2014 03:39:19.9: Doing periodic autofocus. 04-May-2014 03:39:19.9: Start special ACP AutoFocus script for scheduler 04-May-2014 03:39:35.0: ** Sequencer script "AutoFocusScheduler" failed: 04-May-2014 03:39:35.0: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 37 column 5. Script Context: 34: Sub Main() 35: Dim Filt, dtStart, buf, CT 36: => 37: Set SUP = CreateObject("ACP.AcquireSupport") ^ 38: SUP.Initialize 39: 40: dtStart = Util.SysUTCDate -- end -- 04-May-2014 03:39:35.0: ** Autofocus failed (n=3), will retry ASAP after 10 min. 04-May-2014 03:39:36.9: Dispatcher cycle time: 0.1092002 sec. 04-May-2014 03:39:36.9: Acquire data for Observation Pal_3... 04-May-2014 03:39:36.9: (belongs to Project Welch_gc, Plan Pal_3) 04-May-2014 03:39:36.9: Send Observation Pal_3 to ACP Sequencer 04-May-2014 03:39:38.2: Dispatcher stopped at 04-May-2014 03:39:38 UTC 04-May-2014 03:39:38.2: **DISPATCHER INTERRUPT LEVEL 1 RECEIVED** 04-May-2014 03:39:52.6: ** Sequencer script "AcquireScheduler" failed: 04-May-2014 03:39:52.6: **Script Error (Tracking has been stopped)** Source: ACP Observatory Control Software Message: The script was interrupted before completion. at line 791 column 5. Script Context: 788: ' 789: ' Support library 790: ' => 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here ^ 792: Call SUP.Initialize() ' Do initialization (may log) 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory -- end -- 04-May-2014 03:39:55.7: ACP ERROR: Run failed due to script error (see ACP run log) 04-May-2014 03:39:55.7: ACP data acquisition failed for Observation Pal_3. 04-May-2014 03:39:55.7: (Observation Pal_3 interrupted by acquisition process failure.) 04-May-2014 03:55:06.0: Dispatcher started at 04-May-2014 03:55:06 UTC 04-May-2014 03:55:06.0: Priority: W[0]=1.00 04-May-2014 03:55:06.0: Transit Altitude: W[1]=0.70 04-May-2014 03:55:06.0: Highest Altitude: W[6]=0.00 04-May-2014 03:55:06.0: Lateness: W[5]=0.00 04-May-2014 03:55:06.0: Slew Distance: W[2]=0.30 04-May-2014 03:55:06.0: Retry Count: W[3]=0.20 04-May-2014 03:55:06.0: Meridian Crossing: W[4]=0.30 04-May-2014 03:55:06.0: Obs Conditions: W[7]=0.40 04-May-2014 03:55:06.0: Rising Plan Delay: disabled 04-May-2014 03:55:09.9: ++ Observatory Startup ++ 04-May-2014 03:55:09.9: Start ACP Sequencer's StartupObs script 04-May-2014 03:55:28.9: ++ Auto Focus ++ 04-May-2014 03:55:28.9: Doing initial autofocus. 04-May-2014 03:55:28.9: Start special ACP AutoFocus script for scheduler 04-May-2014 03:58:40.2: Next periodic autofocus ASAP after 04-May-2014 05:58:25 UTC 04-May-2014 03:58:42.3: Dispatcher cycle time: 0.1248003 sec. 04-May-2014 03:58:42.3: Acquire data for Observation SA52_56... 04-May-2014 03:58:42.4: (belongs to Project Landolt_1, Plan SA52_56) 04-May-2014 03:58:42.4: Send Observation SA52_56 to ACP Sequencer 04-May-2014 04:02:46.1: Dispatcher stopped at 04-May-2014 04:02:46 UTC 04-May-2014 04:02:46.1: **DISPATCHER INTERRUPT LEVEL 1 RECEIVED** 04-May-2014 04:02:58.0: RUN FAILED: Scheduler was stopped during run 04-May-2014 04:02:58.0: ACP data acquisition failed for Observation SA52_56. 04-May-2014 04:02:58.0: (Observation SA52_56 interrupted by operator or system.) 04-May-2014 04:16:03.0: Dispatcher started at 04-May-2014 04:16:03 UTC 04-May-2014 04:16:03.0: Priority: W[0]=1.00 04-May-2014 04:16:03.0: Transit Altitude: W[1]=0.70 04-May-2014 04:16:03.0: Highest Altitude: W[6]=0.00 04-May-2014 04:16:03.0: Lateness: W[5]=0.00 04-May-2014 04:16:03.0: Slew Distance: W[2]=0.30 04-May-2014 04:16:03.0: Retry Count: W[3]=0.20 04-May-2014 04:16:03.0: Meridian Crossing: W[4]=0.30 04-May-2014 04:16:03.0: Obs Conditions: W[7]=0.40 04-May-2014 04:16:03.0: Rising Plan Delay: disabled 04-May-2014 04:16:08.4: ++ Observatory Startup ++ 04-May-2014 04:16:08.4: Start ACP Sequencer's StartupObs script 04-May-2014 04:16:27.3: ++ Auto Focus ++ 04-May-2014 04:16:27.3: Doing initial autofocus. 04-May-2014 04:16:27.3: Start special ACP AutoFocus script for scheduler 04-May-2014 04:20:18.6: Next periodic autofocus ASAP after 04-May-2014 06:19:37 UTC 04-May-2014 04:20:21.0: Dispatcher cycle time: 0.4680008 sec. 04-May-2014 04:20:21.0: Acquire data for Observation SA99_438... 04-May-2014 04:20:21.0: (belongs to Project Landolt_2, Plan SA99_438) 04-May-2014 04:20:21.0: Send Observation SA99_438 to ACP Sequencer 04-May-2014 04:25:23.6: Acquisition time: 302.5791315 sec. 04-May-2014 04:25:23.6: Data for Observation SA99_438 acquired successfully. 04-May-2014 04:25:23.6: Image Efficiency: 18.1% 04-May-2014 04:25:23.6: Cycle Efficiency: 99.8% 04-May-2014 04:25:32.8: Dispatcher cycle time: 0.0936002 sec. 04-May-2014 04:25:32.8: Acquire data for Observation Pal_5... 04-May-2014 04:25:32.8: (belongs to Project Welch_gc, Plan Pal_5) 04-May-2014 04:25:32.8: Send Observation Pal_5 to ACP Sequencer 04-May-2014 04:52:47.3: Acquisition time: 1634.4470708 sec. 04-May-2014 04:52:47.3: Data for Observation Pal_5 acquired successfully. 04-May-2014 04:52:47.3: Image Efficiency: 73.4% 04-May-2014 04:52:47.3: Cycle Efficiency: 100.0% 04-May-2014 04:52:50.4: Dispatcher cycle time: 0.1560003 sec. 04-May-2014 04:52:50.4: Acquire data for Observation SA106... 04-May-2014 04:52:50.4: (belongs to Project Landolt_1, Plan SA106) 04-May-2014 04:52:50.4: Send Observation SA106 to ACP Sequencer 04-May-2014 04:59:26.4: Acquisition time: 396.0066955 sec. 04-May-2014 04:59:26.4: Data for Observation SA106 acquired successfully. 04-May-2014 04:59:26.4: Image Efficiency: 32.8% 04-May-2014 04:59:26.4: Cycle Efficiency: 100.0% 04-May-2014 04:59:35.1: Dispatcher cycle time: 0.1092002 sec. 04-May-2014 04:59:35.1: Acquire data for Observation NGC_5904... 04-May-2014 04:59:35.1: (belongs to Project Welch_gc, Plan NGC_5904) 04-May-2014 04:59:35.1: Send Observation NGC_5904 to ACP Sequencer 04-May-2014 05:14:54.8: Acquisition time: 919.7474155 sec. 04-May-2014 05:14:54.8: Data for Observation NGC_5904 acquired successfully. 04-May-2014 05:14:54.8: Image Efficiency: 65.2% 04-May-2014 05:14:54.8: Cycle Efficiency: 100.0% 04-May-2014 05:14:59.9: Dispatcher cycle time: 0.1248002 sec. 04-May-2014 05:14:59.9: Acquire data for Observation SA132... 04-May-2014 05:14:59.9: (belongs to Project Landolt_2, Plan SA132) 04-May-2014 05:14:59.9: Send Observation SA132 to ACP Sequencer 04-May-2014 05:20:34.7: Acquisition time: 334.7921881 sec. 04-May-2014 05:20:34.7: Data for Observation SA132 acquired successfully. 04-May-2014 05:20:34.7: Image Efficiency: 31.3% 04-May-2014 05:20:34.7: Cycle Efficiency: 99.9% 04-May-2014 05:20:41.8: Dispatcher cycle time: 0.0936002 sec. 04-May-2014 05:20:41.8: Acquire data for Observation X_Dra... 04-May-2014 05:20:41.8: (belongs to Project Mogul_Mira, Plan X_Dra) 04-May-2014 05:20:41.8: Send Observation X_Dra to ACP Sequencer 04-May-2014 05:51:06.8: Acquisition time: 1825.0492056 sec. 04-May-2014 05:51:06.8: Data for Observation X_Dra acquired successfully. 04-May-2014 05:51:06.8: Image Efficiency: 60.3% 04-May-2014 05:51:06.8: Cycle Efficiency: 100.0% 04-May-2014 05:51:08.4: Dispatcher cycle time: 0.1404003 sec. 04-May-2014 05:51:08.4: Acquire data for Observation NGC_6229... 04-May-2014 05:51:08.4: (belongs to Project Welch_gc, Plan NGC_6229) 04-May-2014 05:51:08.4: Send Observation NGC_6229 to ACP Sequencer 04-May-2014 06:24:22.5: Acquisition time: 1994.0901025 sec. 04-May-2014 06:24:22.5: Data for Observation NGC_6229 acquired successfully. 04-May-2014 06:24:22.6: Image Efficiency: 80.2% 04-May-2014 06:24:22.6: Cycle Efficiency: 100.0% 04-May-2014 06:24:29.2: ++ Auto Focus ++ 04-May-2014 06:24:29.2: Doing periodic autofocus. 04-May-2014 06:24:29.2: Start special ACP AutoFocus script for scheduler 04-May-2014 06:28:05.6: Next periodic autofocus ASAP after 04-May-2014 08:27:43 UTC 04-May-2014 06:28:07.8: Dispatcher cycle time: 0.2184004 sec. 04-May-2014 06:28:07.8: Acquire data for Observation SA84... 04-May-2014 06:28:07.8: (belongs to Project Landolt_1, Plan SA84) 04-May-2014 06:28:07.8: Send Observation SA84 to ACP Sequencer 04-May-2014 06:34:47.6: Acquisition time: 399.8609024 sec. 04-May-2014 06:34:47.6: Data for Observation SA84 acquired successfully. 04-May-2014 06:34:47.7: Image Efficiency: 32.5% 04-May-2014 06:34:47.7: Cycle Efficiency: 99.9% 04-May-2014 06:34:54.1: Dispatcher cycle time: 0.2340004 sec. 04-May-2014 06:34:54.1: Acquire data for Observation NGC_6171... 04-May-2014 06:34:54.1: (belongs to Project Welch_gc, Plan NGC_6171) 04-May-2014 06:34:54.1: Send Observation NGC_6171 to ACP Sequencer 04-May-2014 06:55:06.0: Acquisition time: 1211.8725285 sec. 04-May-2014 06:55:06.0: Data for Observation NGC_6171 acquired successfully. 04-May-2014 06:55:06.0: Image Efficiency: 74.2% 04-May-2014 06:55:06.0: Cycle Efficiency: 100.0% 04-May-2014 06:55:12.7: Dispatcher cycle time: 0.2652005 sec. 04-May-2014 06:55:12.7: Acquire data for Observation M56... 04-May-2014 06:55:12.7: (belongs to Project AAVSO_Monitoring, Plan M56) 04-May-2014 06:55:12.7: Doing 3 sets 04-May-2014 06:55:12.7: Send Observation M56 to ACP Sequencer 04-May-2014 07:02:25.2: Send Observation M56 to ACP Sequencer 04-May-2014 07:08:26.9: Send Observation M56 to ACP Sequencer 04-May-2014 07:14:07.4: Acquisition time: 1134.699625 sec. 04-May-2014 07:14:07.4: Data for Observation M56 acquired successfully. 04-May-2014 07:14:07.5: Image Efficiency: 63.4% 04-May-2014 07:14:07.5: Cycle Efficiency: 100.0% 04-May-2014 07:14:11.3: Dispatcher cycle time: 0.2652004 sec. 04-May-2014 07:14:11.3: Acquire data for Observation NGC_6218... 04-May-2014 07:14:11.3: (belongs to Project Welch_gc, Plan NGC_6218) 04-May-2014 07:14:11.3: Send Observation NGC_6218 to ACP Sequencer 04-May-2014 07:30:17.2: Acquisition time: 965.9390967 sec. 04-May-2014 07:30:17.2: Data for Observation NGC_6218 acquired successfully. 04-May-2014 07:30:17.2: Image Efficiency: 62.1% 04-May-2014 07:30:17.2: Cycle Efficiency: 100.0% 04-May-2014 07:30:22.9: Dispatcher cycle time: 0.6552012 sec. 04-May-2014 07:30:22.9: Acquire data for Observation PNV_J1902... 04-May-2014 07:30:22.9: (belongs to Project AAVSO_Monitoring, Plan PNV_J1902) 04-May-2014 07:30:22.9: Send Observation PNV_J1902 to ACP Sequencer 04-May-2014 08:08:20.4: Acquisition time: 2277.4500002 sec. 04-May-2014 08:08:20.4: Data for Observation PNV_J1902 acquired successfully. 04-May-2014 08:08:20.4: Image Efficiency: 61.5% 04-May-2014 08:08:20.4: Cycle Efficiency: 100.0% 04-May-2014 08:08:31.3: Dispatcher cycle time: 0.8268014 sec. 04-May-2014 08:08:31.3: Acquire data for Observation V2673_Oph... 04-May-2014 08:08:31.3: (belongs to Project Nova_Monitoring, Plan V2673_Oph) 04-May-2014 08:08:31.3: Send Observation V2673_Oph to ACP Sequencer 04-May-2014 08:29:01.3: Acquisition time: 1230.0475606 sec. 04-May-2014 08:29:01.3: Data for Observation V2673_Oph acquired successfully. 04-May-2014 08:29:01.3: Image Efficiency: 73.1% 04-May-2014 08:29:01.3: Cycle Efficiency: 99.9% 04-May-2014 08:29:10.0: ++ Auto Focus ++ 04-May-2014 08:29:10.0: Doing periodic autofocus. 04-May-2014 08:29:10.0: Start special ACP AutoFocus script for scheduler 04-May-2014 08:32:11.7: Next periodic autofocus ASAP after 04-May-2014 10:31:52 UTC 04-May-2014 08:32:12.3: Dispatcher cycle time: 0.530401 sec. 04-May-2014 08:32:12.3: Acquire data for Observation V339_Del_TMO61... 04-May-2014 08:32:12.3: (belongs to Project AAVSO_Monitoring, Plan V339_Del_TMO61) 04-May-2014 08:32:12.3: Doing 400 sets 04-May-2014 08:32:12.7: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 08:38:47.8: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 08:43:22.1: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 08:48:04.0: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 08:52:46.0: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 08:57:09.9: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 09:01:53.1: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 09:06:57.2: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 09:12:10.9: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 09:16:58.8: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 09:23:47.3: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 09:28:37.0: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 09:33:09.1: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 09:38:08.2: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 09:43:13.1: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 09:48:17.2: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 09:53:27.7: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 09:58:16.9: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 10:02:31.2: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 10:07:13.7: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 10:11:40.3: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 10:16:47.5: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 10:21:28.8: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 10:26:32.2: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 10:31:19.0: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 10:35:58.7: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 10:40:39.6: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 10:45:32.4: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 10:50:22.1: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 10:55:04.5: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 10:59:42.8: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 11:04:39.5: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 11:09:03.3: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 11:14:12.2: Send Observation V339_Del_TMO61 to ACP Sequencer 04-May-2014 11:18:57.7: ***Running Plan V339_Del_TMO61 (best efforts) completed early: 04-May-2014 11:18:57.7: Obs V339_Del_TMO61 would extend past dawn 04-May-2014 11:18:57.7: Acquisition time: 10004.7891728 sec. 04-May-2014 11:18:57.7: Data for Observation V339_Del_TMO61 acquired successfully. 04-May-2014 11:18:57.7: Image Efficiency: 30.6% 04-May-2014 11:18:57.7: Cycle Efficiency: 100.0% 04-May-2014 11:19:01.4: ++ Auto Focus ++ 04-May-2014 11:19:01.4: Doing periodic autofocus. 04-May-2014 11:19:01.4: Start special ACP AutoFocus script for scheduler 04-May-2014 11:22:05.3: Next periodic autofocus ASAP after 04-May-2014 13:21:40 UTC 04-May-2014 11:22:43.8: ++ Dawn Flats ++ 04-May-2014 11:22:43.8: Start ACP AutoFlat script for Dawn 04-May-2014 12:13:27.9: -- Observatory Shutdown -- 04-May-2014 12:13:28.4: Weather disconnected. 04-May-2014 12:13:28.4: Start ACP Sequencer's ShutdownObs script 04-May-2014 13:23:22.6: **EXCEPTION IN SCHEDULER: 04-May-2014 13:23:22.6: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA) 04-May-2014 13:23:22.7: Traceback: at System.RuntimeType.InvokeDispMethod(String name, BindingFlags invokeAttr, Object target, Object[] args, Boolean[] byrefModifiers, Int32 culture, String[] namedParameters) at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams) at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args) at DC3.Scheduler.ACPSequencer.RunScript(String scrPath, String param) at DC3.Scheduler.ACPSequencer.DoShutdown() at DC3.Scheduler.Engine.DoShutdownIf() at DC3.Scheduler.Engine.Run() 04-May-2014 13:23:22.8: Run statistics: 04-May-2014 13:23:22.8: Observations: 173 04-May-2014 13:23:22.8: Considered: 86 04-May-2014 13:23:22.8: Completed: 14 04-May-2014 13:23:22.8: Skipped: 53 04-May-2014 13:23:22.8: Never Eligible: 87 04-May-2014 13:23:22.8: Failed: 19 04-May-2014 13:23:22.8: Shutter-Open efficiency: 49.68% 04-May-2014 13:23:22.8: Overall Efficiency: 99.90% 04-May-2014 13:23:22.8: Release ACP sequencer 04-May-2014 13:23:22.8: Failed to stop sequencer: 04-May-2014 13:23:22.8: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA) Log closed at Sun, May 04 2014 13:23:24 UTC (actual time)