Log opened at Tue, Jan 14 2014 19:17:45 UTC (actual time) Current log level is Debug Scheduler version 3.5.3 Multi-user license: Arne Henden 15-Jan-2014 00:19:42.7: ++ Observatory Startup ++ 15-Jan-2014 00:19:42.7: Start ACP Sequencer's StartupObs script 15-Jan-2014 00:19:52.8: Sequencer is now active 15-Jan-2014 00:20:22.8: Sequencer is no longer active 15-Jan-2014 00:20:26.9: Open the observatory dome/roof 15-Jan-2014 01:20:40.0: ++ Auto Focus ++ 15-Jan-2014 01:20:40.0: Doing initial autofocus. 15-Jan-2014 01:20:40.0: Start special ACP AutoFocus script for scheduler 15-Jan-2014 01:20:50.0: Sequencer is now active 15-Jan-2014 01:20:55.1: Sequencer is no longer active 15-Jan-2014 01:20:55.1: ** Sequencer script "AutoFocusScheduler" failed: 15-Jan-2014 01:20:55.1: **Script Error (Tracking has been stopped)** Source: ACP Message: The camera is not connected. at line 38 column 5. Script Context: 35: Dim Filt, dtStart, buf, CT 36: 37: Set SUP = CreateObject("ACP.AcquireSupport") => 38: SUP.Initialize ^ 39: 40: dtStart = Util.SysUTCDate 41: buf = "AutoFocus-" & Util.FormatVar(dtStart, "dd-mmm-yyyy@HhNnSs") & ".log" ' Typical Log Name -- end -- 15-Jan-2014 01:20:55.1: ** Autofocus failed (n=1), will retry ASAP after 0 min. 15-Jan-2014 01:20:57.0: Plan SA98 has Monitor Mode. Time to resubmit it. 15-Jan-2014 01:20:57.0: Plan T_Ori has Monitor Mode. Time to resubmit it. 15-Jan-2014 01:20:57.0: Plan V0809_Cep has Monitor Mode. Time to resubmit it. 15-Jan-2014 01:20:57.0: Plan SN_2013ej has Monitor Mode. Time to resubmit it. 15-Jan-2014 01:20:57.0: Plan GSC_3649-0825 has Monitor Mode. Time to resubmit it. 15-Jan-2014 01:20:57.0: Plan 2MASS_23275353+5214532 has Monitor Mode. Time to resubmit it. 15-Jan-2014 01:20:57.0: Plan IC_348 has Monitor Mode. Time to resubmit it. 15-Jan-2014 01:20:57.0: Plan CB_32 has Monitor Mode. Time to resubmit it. 15-Jan-2014 01:20:57.0: Plan V1404_Cyg has Monitor Mode. Time to resubmit it. 15-Jan-2014 01:20:57.0: Plan V0965_Per has Monitor Mode. Time to resubmit it. 15-Jan-2014 01:20:57.0: Plan KT_Eri has Monitor Mode. Time to resubmit it. 15-Jan-2014 01:20:57.0: Plan NGC_7790 has Monitor Mode. Time to resubmit it. 15-Jan-2014 01:20:57.0: Plan SA68_216 has Monitor Mode. Time to resubmit it. 15-Jan-2014 01:20:57.0: Plan SA44_28 has Monitor Mode. Time to resubmit it. 15-Jan-2014 01:20:57.0: Plan SA93_317 has Monitor Mode. Time to resubmit it. 15-Jan-2014 01:20:57.0: Plan SA96_171 has Monitor Mode. Time to resubmit it. 15-Jan-2014 01:20:57.0: Plan SA99_438 has Monitor Mode. Time to resubmit it. 15-Jan-2014 01:20:57.0: Plan SA52_56 has Monitor Mode. Time to resubmit it. 15-Jan-2014 01:20:57.0: Plan SA100_267 has Monitor Mode. Time to resubmit it. 15-Jan-2014 01:20:57.0: Plan SA116_180 has Monitor Mode. Time to resubmit it. 15-Jan-2014 01:20:57.0: Plan SA68_216 has Monitor Mode. Time to resubmit it. 15-Jan-2014 01:20:57.0: Plan SA44_28 has Monitor Mode. Time to resubmit it. 15-Jan-2014 01:20:57.0: Plan SA93_317 has Monitor Mode. Time to resubmit it. 15-Jan-2014 01:20:57.0: Plan SA99_438 has Monitor Mode. Time to resubmit it. 15-Jan-2014 01:20:57.0: Plan SA100_267 has Monitor Mode. Time to resubmit it. 15-Jan-2014 01:20:57.0: SelectRunning: No running plans 15-Jan-2014 01:20:57.4: Obs CB_32 in Plan CB_32 was vetoed by AirMass constraint. 15-Jan-2014 01:20:57.4: AirMass estimates ready after 15-Jan-2014 01:29:02 UTC 15-Jan-2014 01:20:57.4: Obs FG_Sge in Plan FG_Sge was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.4: AirmassRange estimates ready after 15-Jan-2014 15:11:37 UTC 15-Jan-2014 01:20:57.4: Obs KH_15D in Plan KH_15D was vetoed by AirMass constraint. 15-Jan-2014 01:20:57.4: AirMass estimates ready after 15-Jan-2014 02:08:00 UTC 15-Jan-2014 01:20:57.4: Obs MP_Gem in Plan MP_Gem was vetoed by AirMass constraint. 15-Jan-2014 01:20:57.4: AirMass estimates ready after 15-Jan-2014 01:51:56 UTC 15-Jan-2014 01:20:57.4: Obs NGC_2438 in Plan NGC_2438 was vetoed by AirMass constraint. 15-Jan-2014 01:20:57.4: AirMass estimates ready after 15-Jan-2014 02:55:53 UTC 15-Jan-2014 01:20:57.4: Obs PNV_J1902 in Plan PNV_J1902 was vetoed by AirMass constraint. 15-Jan-2014 01:20:57.4: AirMass estimates ready after 15-Jan-2014 14:29:31 UTC 15-Jan-2014 01:20:57.4: Obs RR_Aqr in Plan RR_Aqr was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.4: AirmassRange estimates ready after 15-Jan-2014 17:15:21 UTC 15-Jan-2014 01:20:57.4: Obs RR_Equ in Plan RR_Equ was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.4: AirmassRange estimates ready after 15-Jan-2014 16:42:47 UTC 15-Jan-2014 01:20:57.4: Obs RR_Vir in Plan RR_Vir was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.4: AirmassRange estimates ready after 15-Jan-2014 10:29:58 UTC 15-Jan-2014 01:20:57.5: Obs RZ_Leo in Plan RZ_Leo was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.5: AirmassRange estimates ready after 15-Jan-2014 06:57:46 UTC 15-Jan-2014 01:20:57.5: Obs SA100_267 in Plan SA100_267 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.5: AirmassRange estimates ready after 15-Jan-2014 04:07:02 UTC 15-Jan-2014 01:20:57.5: Obs SA100_267 in Plan SA100_267 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.5: AirmassRange estimates ready after 15-Jan-2014 06:15:06 UTC 15-Jan-2014 01:20:57.5: Obs SA103 in Plan SA103 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.5: AirmassRange estimates ready after 15-Jan-2014 09:16:28 UTC 15-Jan-2014 01:20:57.5: Obs SA103 in Plan SA103 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.5: AirmassRange estimates ready after 15-Jan-2014 07:08:34 UTC 15-Jan-2014 01:20:57.5: Obs SA106 in Plan SA106 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.5: AirmassRange estimates ready after 15-Jan-2014 11:59:46 UTC 15-Jan-2014 01:20:57.5: Obs SA106 in Plan SA106 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.5: AirmassRange estimates ready after 15-Jan-2014 09:52:28 UTC 15-Jan-2014 01:20:57.5: Obs SA109 in Plan SA109 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.5: AirmassRange estimates ready after 15-Jan-2014 15:03:11 UTC 15-Jan-2014 01:20:57.5: Obs SA109 in Plan SA109 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.5: AirmassRange estimates ready after 15-Jan-2014 12:56:05 UTC 15-Jan-2014 01:20:57.5: Obs SA110 in Plan SA110 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.5: AirmassRange estimates ready after 15-Jan-2014 15:57:17 UTC 15-Jan-2014 01:20:57.5: Obs SA110 in Plan SA110 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.5: AirmassRange estimates ready after 15-Jan-2014 13:51:08 UTC 15-Jan-2014 01:20:57.5: Obs SA111 in Plan SA111 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.5: AirmassRange estimates ready after 15-Jan-2014 16:53:03 UTC 15-Jan-2014 01:20:57.5: Obs SA111 in Plan SA111 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.5: AirmassRange estimates ready after 15-Jan-2014 14:46:43 UTC 15-Jan-2014 01:20:57.5: Obs SA1119 in Plan SA1119 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.5: AirmassRange estimates ready after 15-Jan-2014 14:46:28 UTC 15-Jan-2014 01:20:57.6: Obs SA1119 in Plan SA1119 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.6: AirmassRange estimates ready after 15-Jan-2014 16:52:21 UTC 15-Jan-2014 01:20:57.6: Obs SA112_810 in Plan SA112_810 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.6: AirmassRange estimates ready after 15-Jan-2014 15:51:53 UTC 15-Jan-2014 01:20:57.6: Obs SA112_810 in Plan SA112_810 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.6: AirmassRange estimates ready after 15-Jan-2014 17:58:03 UTC 15-Jan-2014 01:20:57.6: Obs SA116_180 in Plan SA116_180 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.6: AirmassRange estimates ready after 15-Jan-2014 02:27:06 UTC 15-Jan-2014 01:20:57.6: Obs SA124_970 in Plan SA124_970 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.6: AirmassRange estimates ready after 15-Jan-2014 04:23:34 UTC 15-Jan-2014 01:20:57.6: Obs SA132 in Plan SA132 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.6: AirmassRange estimates ready after 15-Jan-2014 12:19:53 UTC 15-Jan-2014 01:20:57.6: Obs SA44_28 in Plan SA44_28 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.6: AirmassRange estimates ready after 15-Jan-2014 04:44:39 UTC 15-Jan-2014 01:20:57.6: Obs SA52_56 in Plan SA52_56 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.6: AirmassRange estimates ready after 15-Jan-2014 04:30:40 UTC 15-Jan-2014 01:20:57.6: Obs SA52_56 in Plan SA52_56 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.6: AirmassRange estimates ready after 15-Jan-2014 02:33:00 UTC 15-Jan-2014 01:20:57.6: Obs SA61 in Plan SA61 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.6: AirmassRange estimates ready after 15-Jan-2014 11:01:57 UTC 15-Jan-2014 01:20:57.6: Obs SA61 in Plan SA61 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.6: AirmassRange estimates ready after 15-Jan-2014 13:00:02 UTC 15-Jan-2014 01:20:57.6: Obs SA68_216 in Plan SA68_216 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.6: AirmassRange estimates ready after 15-Jan-2014 04:03:55 UTC 15-Jan-2014 01:20:57.6: Obs SA84 in Plan SA84 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.6: AirmassRange estimates ready after 15-Jan-2014 12:43:46 UTC 15-Jan-2014 01:20:57.6: Obs SA84 in Plan SA84 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.6: AirmassRange estimates ready after 15-Jan-2014 10:50:14 UTC 15-Jan-2014 01:20:57.6: Obs SA93_317 in Plan SA93_317 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.6: AirmassRange estimates ready after 15-Jan-2014 05:00:36 UTC 15-Jan-2014 01:20:57.6: Obs SA96_171 in Plan SA96_171 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.6: AirmassRange estimates ready after 15-Jan-2014 02:11:13 UTC 15-Jan-2014 01:20:57.6: Obs SA96_171 in Plan SA96_171 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.6: AirmassRange estimates ready after 15-Jan-2014 07:54:10 UTC 15-Jan-2014 01:20:57.7: Obs SA98 in Plan SA98 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.7: AirmassRange estimates ready after 15-Jan-2014 04:13:03 UTC 15-Jan-2014 01:20:57.7: Obs SA98 in Plan SA98 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.7: AirmassRange estimates ready after 15-Jan-2014 02:05:34 UTC 15-Jan-2014 01:20:57.7: Obs SA99_438 in Plan SA99_438 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.7: AirmassRange estimates ready after 15-Jan-2014 03:08:37 UTC 15-Jan-2014 01:20:57.7: Obs SA99_438 in Plan SA99_438 was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.7: AirmassRange estimates ready after 15-Jan-2014 05:15:53 UTC 15-Jan-2014 01:20:57.7: Obs SDSS073224 in Plan SDSS073224 was vetoed by AirMass constraint. 15-Jan-2014 01:20:57.7: AirMass estimates ready after 15-Jan-2014 02:20:48 UTC 15-Jan-2014 01:20:57.7: Obs SN_2013cj in Plan SN_2013cj was vetoed by AirMass constraint. 15-Jan-2014 01:20:57.7: AirMass estimates ready after 15-Jan-2014 13:18:02 UTC 15-Jan-2014 01:20:57.7: Obs SN_2013df in Plan SN_2013df was vetoed by AirMass constraint. 15-Jan-2014 01:20:57.7: AirMass estimates ready after 15-Jan-2014 07:05:54 UTC 15-Jan-2014 01:20:57.7: STRICT VETO: 15-Jan-2014 01:20:57.7: Obs SN_2013dy in Plan SN_2013dy was vetoed by AirMass constraint. 15-Jan-2014 01:20:57.7: AirMass estimates ready after 15-Jan-2014 17:43:27 UTC 15-Jan-2014 01:20:57.7: Obs ST_Lyr in Plan ST_Lyr was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.7: AirmassRange estimates ready after 15-Jan-2014 13:25:48 UTC 15-Jan-2014 01:20:57.7: Obs ST_Sge in Plan ST_Sge was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.7: AirmassRange estimates ready after 15-Jan-2014 15:10:47 UTC 15-Jan-2014 01:20:57.7: Obs SW_Aql in Plan SW_Aql was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.7: AirmassRange estimates ready after 15-Jan-2014 15:07:11 UTC 15-Jan-2014 01:20:57.7: Obs T_CMi in Plan T_CMi was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.7: AirmassRange estimates ready after 15-Jan-2014 02:55:07 UTC 15-Jan-2014 01:20:57.7: Obs T_Ori in Plan T_Ori was vetoed by AirMass constraint. 15-Jan-2014 01:20:57.7: AirMass estimates ready after 15-Jan-2014 02:37:57 UTC 15-Jan-2014 01:20:57.7: Obs TU_Aql in Plan TU_Aql was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.7: AirmassRange estimates ready after 15-Jan-2014 15:12:35 UTC 15-Jan-2014 01:20:57.7: Obs UU_Lyr in Plan UU_Lyr was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.7: AirmassRange estimates ready after 15-Jan-2014 13:49:59 UTC 15-Jan-2014 01:20:57.8: Obs V0959_Mon in Plan V0959_Mon was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.8: AirmassRange estimates ready after 15-Jan-2014 02:15:49 UTC 15-Jan-2014 01:20:57.8: Obs V1721_Aql in Plan V1721_Aql was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.8: AirmassRange estimates ready after 15-Jan-2014 14:37:22 UTC 15-Jan-2014 01:20:57.8: Obs V1722_Aql in Plan V1722_Aql was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.8: AirmassRange estimates ready after 15-Jan-2014 14:25:04 UTC 15-Jan-2014 01:20:57.8: Obs V1723_Aql in Plan V1723_Aql was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.8: AirmassRange estimates ready after 15-Jan-2014 14:51:26 UTC 15-Jan-2014 01:20:57.8: Obs V1724_Aql in Plan V1724_Aql was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.8: AirmassRange estimates ready after 15-Jan-2014 14:44:52 UTC 15-Jan-2014 01:20:57.8: Obs V2468_Cyg in Plan V2468_Cyg was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.8: AirmassRange estimates ready after 15-Jan-2014 14:39:17 UTC 15-Jan-2014 01:20:57.8: Obs V2491_Cyg in Plan V2491_Cyg was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.8: AirmassRange estimates ready after 15-Jan-2014 14:19:13 UTC 15-Jan-2014 01:20:57.8: Obs V2670_Oph in Plan V2670_Oph was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.8: AirmassRange estimates ready after 15-Jan-2014 15:36:31 UTC 15-Jan-2014 01:20:57.8: Obs V2671_Oph in Plan V2671_Oph was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.8: AirmassRange estimates ready after 15-Jan-2014 16:19:28 UTC 15-Jan-2014 01:20:57.8: Obs V2672_Oph in Plan V2672_Oph was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.8: AirmassRange estimates ready after 15-Jan-2014 16:17:34 UTC 15-Jan-2014 01:20:57.8: Obs V2673_Oph in Plan V2673_Oph was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.8: AirmassRange estimates ready after 15-Jan-2014 15:15:41 UTC 15-Jan-2014 01:20:57.8: Obs V2676_Oph in Plan V2676_Oph was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.8: AirmassRange estimates ready after 15-Jan-2014 15:49:10 UTC 15-Jan-2014 01:20:57.8: Obs V2677_Oph in Plan V2677_Oph was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.8: AirmassRange estimates ready after 15-Jan-2014 15:47:50 UTC 15-Jan-2014 01:20:57.8: Obs V339_Del_TMO61 in Plan V339_Del_TMO61 was vetoed by AirMass constraint. 15-Jan-2014 01:20:57.8: AirMass estimates ready after 15-Jan-2014 14:51:27 UTC 15-Jan-2014 01:20:57.8: Obs V496_Sct in Plan V496_Sct was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.8: AirmassRange estimates ready after 15-Jan-2014 15:01:40 UTC 15-Jan-2014 01:20:57.8: Obs V5579_Sgr in Plan V5579_Sgr was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.8: AirmassRange estimates ready after 15-Jan-2014 16:57:44 UTC 15-Jan-2014 01:20:57.8: Obs V5581_Sgr in Plan V5581_Sgr was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.8: AirmassRange estimates ready after 15-Jan-2014 16:11:01 UTC 15-Jan-2014 01:20:57.9: Obs V5582_Sgr in Plan V5582_Sgr was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.9: AirmassRange estimates ready after 15-Jan-2014 15:08:25 UTC 15-Jan-2014 01:20:57.9: Obs V5584_Sgr in Plan V5584_Sgr was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.9: AirmassRange estimates ready after 15-Jan-2014 15:30:32 UTC 15-Jan-2014 01:20:57.9: Obs V5587_Sgr in Plan V5587_Sgr was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.9: AirmassRange estimates ready after 15-Jan-2014 15:41:47 UTC 15-Jan-2014 01:20:57.9: Obs V5588_Sgr in Plan V5588_Sgr was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.9: AirmassRange estimates ready after 15-Jan-2014 15:59:17 UTC 15-Jan-2014 01:20:57.9: Obs V5589_Sgr in Plan V5589_Sgr was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.9: AirmassRange estimates ready after 15-Jan-2014 15:34:26 UTC 15-Jan-2014 01:20:57.9: Obs V5590_Sgr in Plan V5590_Sgr was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.9: AirmassRange estimates ready after 15-Jan-2014 17:04:38 UTC 15-Jan-2014 01:20:57.9: Obs V5591_Sgr in Plan V5591_Sgr was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.9: AirmassRange estimates ready after 15-Jan-2014 15:26:31 UTC 15-Jan-2014 01:20:57.9: Obs V5592_Sgr in Plan V5592_Sgr was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.9: AirmassRange estimates ready after 15-Jan-2014 17:35:34 UTC 15-Jan-2014 01:20:57.9: Obs V5593_Sgr in Plan V5593_Sgr was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.9: AirmassRange estimates ready after 15-Jan-2014 15:36:15 UTC 15-Jan-2014 01:20:57.9: Obs V841_Oph in Plan V841_Oph was vetoed by AirMass constraint. 15-Jan-2014 01:20:57.9: AirMass estimates ready after 15-Jan-2014 13:40:41 UTC 15-Jan-2014 01:20:57.9: Obs V849_Her in Plan V849_Her was vetoed by AirMass constraint. 15-Jan-2014 01:20:57.9: AirMass estimates ready after 15-Jan-2014 11:56:10 UTC 15-Jan-2014 01:20:57.9: Obs VV_Gem in Plan VV_Gem was vetoed by MoonAvoid constraint. 15-Jan-2014 01:20:57.9: MoonAvoid estimates ready after 15-Jan-2014 13:20:57 UTC 15-Jan-2014 01:20:57.9: Obs WX_CMi in Plan WX_CMi was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.9: AirmassRange estimates ready after 15-Jan-2014 02:43:47 UTC 15-Jan-2014 01:20:57.9: Obs WZ_Lyr in Plan WZ_Lyr was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:57.9: AirmassRange estimates ready after 15-Jan-2014 13:12:00 UTC 15-Jan-2014 01:20:58.0: Obs X_Dra in Plan X_Dra was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:58.0: AirmassRange estimates ready after 15-Jan-2014 11:40:47 UTC 15-Jan-2014 01:20:58.0: Obs YZ_Vul in Plan YZ_Vul was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:58.0: AirmassRange estimates ready after 15-Jan-2014 14:28:49 UTC 15-Jan-2014 01:20:58.0: Obs Z_Lyr in Plan Z_Lyr was vetoed by AirmassRange constraint. 15-Jan-2014 01:20:58.0: AirmassRange estimates ready after 15-Jan-2014 13:31:05 UTC 15-Jan-2014 01:20:58.0: Obs Z_Tau in Plan Z_Tau was vetoed by MoonAvoid constraint. 15-Jan-2014 01:20:58.0: MoonAvoid estimates ready after 15-Jan-2014 13:20:58 UTC 15-Jan-2014 01:20:58.0: Efficiency: Selecting from 14 pending plans: 15-Jan-2014 01:20:58.1: Selected Plan SA68_216 (TotEff=1.27) 15-Jan-2014 01:20:58.1: Dispatcher cycle time: 1.107602 sec. 15-Jan-2014 01:20:58.1: Acquire data for Observation SA68_216... 15-Jan-2014 01:20:58.1: (belongs to Project Landolt_1, Plan SA68_216) 15-Jan-2014 01:20:58.1: Send Observation SA68_216 to ACP Sequencer 15-Jan-2014 01:21:08.1: Sequencer is now active 15-Jan-2014 01:21:13.3: Sequencer is no longer active 15-Jan-2014 01:21:13.3: ** Sequencer script "AcquireScheduler" failed: 15-Jan-2014 01:21:13.3: **Script Error (Tracking has been stopped)** Source: ACP Message: The camera is not connected. at line 792 column 5. Script Context: 789: ' Support library 790: ' 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here => 792: Call SUP.Initialize() ' Do initialization (may log) ^ 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory 795: -- end -- 15-Jan-2014 01:21:16.4: Post-job status check done (stat=Running) 15-Jan-2014 01:21:16.4: ACP ERROR: Run failed due to script error (see ACP run log) 15-Jan-2014 01:21:16.4: ACP data acquisition failed for Observation SA68_216. 15-Jan-2014 01:21:16.4: (Observation SA68_216 interrupted by acquisition process failure.) 15-Jan-2014 01:21:21.9: ++ Auto Focus ++ 15-Jan-2014 01:21:21.9: Doing periodic autofocus. 15-Jan-2014 01:21:21.9: Start special ACP AutoFocus script for scheduler 15-Jan-2014 01:21:31.9: Sequencer is now active 15-Jan-2014 01:21:37.5: Sequencer is no longer active 15-Jan-2014 01:21:37.5: ** Sequencer script "AutoFocusScheduler" failed: 15-Jan-2014 01:21:37.5: **Script Error (Tracking has been stopped)** Source: ACP Message: The camera is not connected. at line 38 column 5. Script Context: 35: Dim Filt, dtStart, buf, CT 36: 37: Set SUP = CreateObject("ACP.AcquireSupport") => 38: SUP.Initialize ^ 39: 40: dtStart = Util.SysUTCDate 41: buf = "AutoFocus-" & Util.FormatVar(dtStart, "dd-mmm-yyyy@HhNnSs") & ".log" ' Typical Log Name -- end -- 15-Jan-2014 01:21:37.5: ** Autofocus failed (n=2), will retry ASAP after 5 min. 15-Jan-2014 01:21:39.4: SelectRunning: No running plans 15-Jan-2014 01:21:39.5: Efficiency: Selecting from 13 pending plans: 15-Jan-2014 01:21:39.6: Selected Plan SA44_28 (TotEff=1.49) 15-Jan-2014 01:21:39.6: Dispatcher cycle time: 0.7020013 sec. 15-Jan-2014 01:21:39.6: Acquire data for Observation SA44_28... 15-Jan-2014 01:21:39.6: (belongs to Project Landolt_1, Plan SA44_28) 15-Jan-2014 01:21:39.6: Send Observation SA44_28 to ACP Sequencer 15-Jan-2014 01:21:49.6: Sequencer is now active 15-Jan-2014 01:21:55.1: Sequencer is no longer active 15-Jan-2014 01:21:55.1: ** Sequencer script "AcquireScheduler" failed: 15-Jan-2014 01:21:55.1: **Script Error (Tracking has been stopped)** Source: ACP Message: The camera is not connected. at line 792 column 5. Script Context: 789: ' Support library 790: ' 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here => 792: Call SUP.Initialize() ' Do initialization (may log) ^ 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory 795: -- end -- 15-Jan-2014 01:21:58.2: Post-job status check done (stat=Running) 15-Jan-2014 01:21:58.2: ACP ERROR: Run failed due to script error (see ACP run log) 15-Jan-2014 01:21:58.2: ACP data acquisition failed for Observation SA44_28. 15-Jan-2014 01:21:58.2: (Observation SA44_28 interrupted by acquisition process failure.) 15-Jan-2014 01:22:08.2: SelectRunning: No running plans 15-Jan-2014 01:22:08.6: Efficiency: Selecting from 12 pending plans: 15-Jan-2014 01:22:08.6: Selected Plan V1404_Cyg (TotEff=1.35) 15-Jan-2014 01:22:08.7: Dispatcher cycle time: 0.5148009 sec. 15-Jan-2014 01:22:08.7: Acquire data for Observation V1404_Cyg... 15-Jan-2014 01:22:08.7: (belongs to Project Walker, Plan V1404_Cyg) 15-Jan-2014 01:22:08.7: Send Observation V1404_Cyg to ACP Sequencer 15-Jan-2014 01:22:18.7: Sequencer is now active 15-Jan-2014 01:22:24.0: Sequencer is no longer active 15-Jan-2014 01:22:24.0: ** Sequencer script "AcquireScheduler" failed: 15-Jan-2014 01:22:24.0: **Script Error (Tracking has been stopped)** Source: ACP Message: The camera is not connected. at line 792 column 5. Script Context: 789: ' Support library 790: ' 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here => 792: Call SUP.Initialize() ' Do initialization (may log) ^ 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory 795: -- end -- 15-Jan-2014 01:22:27.1: Post-job status check done (stat=Running) 15-Jan-2014 01:22:27.1: ACP ERROR: Run failed due to script error (see ACP run log) 15-Jan-2014 01:22:27.1: ACP data acquisition failed for Observation V1404_Cyg. 15-Jan-2014 01:22:27.1: (Observation V1404_Cyg interrupted by acquisition process failure.) 15-Jan-2014 01:22:33.2: SelectRunning: No running plans 15-Jan-2014 01:22:33.3: Efficiency: Selecting from 11 pending plans: 15-Jan-2014 01:22:33.4: Selected Plan V0809_Cep (TotEff=1.24) 15-Jan-2014 01:22:33.4: Dispatcher cycle time: 0.1560003 sec. 15-Jan-2014 01:22:33.4: Acquire data for Observation V0809_Cep... 15-Jan-2014 01:22:33.4: (belongs to Project Nova_Monitoring, Plan V0809_Cep) 15-Jan-2014 01:22:33.4: Send Observation V0809_Cep to ACP Sequencer 15-Jan-2014 01:22:43.4: Sequencer is now active 15-Jan-2014 01:22:49.0: Sequencer is no longer active 15-Jan-2014 01:22:49.0: ** Sequencer script "AcquireScheduler" failed: 15-Jan-2014 01:22:49.0: **Script Error (Tracking has been stopped)** Source: ACP Message: The camera is not connected. at line 792 column 5. Script Context: 789: ' Support library 790: ' 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here => 792: Call SUP.Initialize() ' Do initialization (may log) ^ 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory 795: -- end -- 15-Jan-2014 01:22:52.1: Post-job status check done (stat=Running) 15-Jan-2014 01:22:52.1: ACP ERROR: Run failed due to script error (see ACP run log) 15-Jan-2014 01:22:52.1: ACP data acquisition failed for Observation V0809_Cep. 15-Jan-2014 01:22:52.1: (Observation V0809_Cep interrupted by acquisition process failure.) 15-Jan-2014 01:22:57.4: SelectRunning: No running plans 15-Jan-2014 01:22:57.5: Efficiency: Selecting from 10 pending plans: 15-Jan-2014 01:22:57.5: Selected Plan GSC_3649-0825 (TotEff=1.20) 15-Jan-2014 01:22:57.6: Dispatcher cycle time: 0.1404003 sec. 15-Jan-2014 01:22:57.6: Acquire data for Observation GSC_3649-0825... 15-Jan-2014 01:22:57.6: (belongs to Project Staels, Plan GSC_3649-0825) 15-Jan-2014 01:22:57.9: Send Observation GSC_3649-0825 to ACP Sequencer 15-Jan-2014 01:23:07.9: Sequencer is now active 15-Jan-2014 01:23:13.0: Sequencer is no longer active 15-Jan-2014 01:23:13.0: ** Sequencer script "AcquireScheduler" failed: 15-Jan-2014 01:23:13.0: **Script Error (Tracking has been stopped)** Source: ACP Message: The camera is not connected. at line 792 column 5. Script Context: 789: ' Support library 790: ' 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here => 792: Call SUP.Initialize() ' Do initialization (may log) ^ 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory 795: -- end -- 15-Jan-2014 01:23:16.1: Post-job status check done (stat=Running) 15-Jan-2014 01:23:16.2: ACP ERROR: Run failed due to script error (see ACP run log) 15-Jan-2014 01:23:16.2: ACP data acquisition failed for Observation GSC_3649-0825. 15-Jan-2014 01:23:16.2: (Observation GSC_3649-0825 interrupted by acquisition process failure.) 15-Jan-2014 01:23:23.6: SelectRunning: No running plans 15-Jan-2014 01:23:23.6: Efficiency: Selecting from 9 pending plans: 15-Jan-2014 01:23:24.0: Selected Plan 2MASS_23275353+5214532 (TotEff=1.20) 15-Jan-2014 01:23:24.1: Dispatcher cycle time: 0.4836008 sec. 15-Jan-2014 01:23:24.1: Acquire data for Observation 2MASS_23275353+5214532... 15-Jan-2014 01:23:24.1: (belongs to Project Staels, Plan 2MASS_23275353+5214532) 15-Jan-2014 01:23:24.1: Send Observation 2MASS_23275353+5214532 to ACP Sequencer 15-Jan-2014 01:23:34.1: Sequencer is now active 15-Jan-2014 01:23:39.3: Sequencer is no longer active 15-Jan-2014 01:23:39.3: ** Sequencer script "AcquireScheduler" failed: 15-Jan-2014 01:23:39.3: **Script Error (Tracking has been stopped)** Source: ACP Message: The camera is not connected. at line 792 column 5. Script Context: 789: ' Support library 790: ' 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here => 792: Call SUP.Initialize() ' Do initialization (may log) ^ 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory 795: -- end -- 15-Jan-2014 01:23:42.4: Post-job status check done (stat=Running) 15-Jan-2014 01:23:42.4: ACP ERROR: Run failed due to script error (see ACP run log) 15-Jan-2014 01:23:42.4: ACP data acquisition failed for Observation 2MASS_23275353+5214532. 15-Jan-2014 01:23:42.4: (Observation 2MASS_23275353+5214532 interrupted by acquisition process failure.) 15-Jan-2014 01:23:42.6: SelectRunning: No running plans 15-Jan-2014 01:23:42.6: Efficiency: Selecting from 8 pending plans: 15-Jan-2014 01:23:42.7: Selected Plan SA93_317 (TotEff=1.49) 15-Jan-2014 01:23:42.7: Dispatcher cycle time: 0.1404002 sec. 15-Jan-2014 01:23:42.7: Acquire data for Observation SA93_317... 15-Jan-2014 01:23:42.7: (belongs to Project Landolt_1, Plan SA93_317) 15-Jan-2014 01:23:42.7: Send Observation SA93_317 to ACP Sequencer 15-Jan-2014 01:23:52.7: Sequencer is now active 15-Jan-2014 01:23:58.6: Sequencer is no longer active 15-Jan-2014 01:23:58.6: ** Sequencer script "AcquireScheduler" failed: 15-Jan-2014 01:23:58.6: **Script Error (Tracking has been stopped)** Source: ACP Message: The camera is not connected. at line 792 column 5. Script Context: 789: ' Support library 790: ' 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here => 792: Call SUP.Initialize() ' Do initialization (may log) ^ 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory 795: -- end -- 15-Jan-2014 01:24:01.7: Post-job status check done (stat=Running) 15-Jan-2014 01:24:01.7: ACP ERROR: Run failed due to script error (see ACP run log) 15-Jan-2014 01:24:01.7: ACP data acquisition failed for Observation SA93_317. 15-Jan-2014 01:24:01.7: (Observation SA93_317 interrupted by acquisition process failure.) 15-Jan-2014 01:24:09.5: SelectRunning: No running plans 15-Jan-2014 01:24:09.6: Efficiency: Selecting from 7 pending plans: 15-Jan-2014 01:24:09.6: Selected Plan PSN_J2237 (TotEff=1.13) 15-Jan-2014 01:24:09.6: Dispatcher cycle time: 0.1092002 sec. 15-Jan-2014 01:24:09.6: Acquire data for Observation PSN_J2237... 15-Jan-2014 01:24:09.6: (belongs to Project AAVSO_Monitoring, Plan PSN_J2237) 15-Jan-2014 01:24:09.6: Doing 3 sets 15-Jan-2014 01:24:10.0: Send Observation PSN_J2237 to ACP Sequencer 15-Jan-2014 01:24:20.0: Sequencer is now active 15-Jan-2014 01:24:25.7: Sequencer is no longer active 15-Jan-2014 01:24:25.7: ** Sequencer script "AcquireScheduler" failed: 15-Jan-2014 01:24:25.7: **Script Error (Tracking has been stopped)** Source: ACP Message: The camera is not connected. at line 792 column 5. Script Context: 789: ' Support library 790: ' 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here => 792: Call SUP.Initialize() ' Do initialization (may log) ^ 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory 795: -- end -- 15-Jan-2014 01:24:28.8: Post-job status check done (stat=Running) 15-Jan-2014 01:24:28.8: ACP ERROR: Run failed due to script error (see ACP run log) 15-Jan-2014 01:24:28.8: ACP data acquisition failed for Observation PSN_J2237. 15-Jan-2014 01:24:28.8: (Observation PSN_J2237 interrupted by acquisition process failure.) 15-Jan-2014 01:24:36.8: SelectRunning: No running plans 15-Jan-2014 01:24:36.9: Efficiency: Selecting from 6 pending plans: 15-Jan-2014 01:24:36.9: Selected Plan NGC_7790 (TotEff=0.96) 15-Jan-2014 01:24:36.9: Dispatcher cycle time: 0.0936001 sec. 15-Jan-2014 01:24:36.9: Acquire data for Observation NGC_7790... 15-Jan-2014 01:24:36.9: (belongs to Project AAVSO_Monitoring, Plan NGC_7790) 15-Jan-2014 01:24:36.9: Doing 3 sets 15-Jan-2014 01:24:37.0: Send Observation NGC_7790 to ACP Sequencer 15-Jan-2014 01:24:47.0: Sequencer is now active 15-Jan-2014 01:24:52.0: Sequencer is no longer active 15-Jan-2014 01:24:52.0: ** Sequencer script "AcquireScheduler" failed: 15-Jan-2014 01:24:52.0: **Script Error (Tracking has been stopped)** Source: ACP Message: The camera is not connected. at line 792 column 5. Script Context: 789: ' Support library 790: ' 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here => 792: Call SUP.Initialize() ' Do initialization (may log) ^ 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory 795: -- end -- 15-Jan-2014 01:24:55.1: Post-job status check done (stat=Running) 15-Jan-2014 01:24:55.1: ACP ERROR: Run failed due to script error (see ACP run log) 15-Jan-2014 01:24:55.1: ACP data acquisition failed for Observation NGC_7790. 15-Jan-2014 01:24:55.1: (Observation NGC_7790 interrupted by acquisition process failure.) 15-Jan-2014 01:25:00.1: SelectRunning: No running plans 15-Jan-2014 01:25:00.1: Efficiency: Selecting from 5 pending plans: 15-Jan-2014 01:25:00.1: Selected Plan SN_2013ej (TotEff=0.95) 15-Jan-2014 01:25:00.2: Dispatcher cycle time: 0.0936001 sec. 15-Jan-2014 01:25:00.2: Acquire data for Observation SN_2013ej... 15-Jan-2014 01:25:00.2: (belongs to Project AAVSO_Monitoring, Plan SN_2013ej) 15-Jan-2014 01:25:00.2: Send Observation SN_2013ej to ACP Sequencer 15-Jan-2014 01:25:10.5: Sequencer is now active 15-Jan-2014 01:25:15.7: Sequencer is no longer active 15-Jan-2014 01:25:15.7: ** Sequencer script "AcquireScheduler" failed: 15-Jan-2014 01:25:15.7: **Script Error (Tracking has been stopped)** Source: ACP Message: The camera is not connected. at line 792 column 5. Script Context: 789: ' Support library 790: ' 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here => 792: Call SUP.Initialize() ' Do initialization (may log) ^ 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory 795: -- end -- 15-Jan-2014 01:25:18.8: Post-job status check done (stat=Running) 15-Jan-2014 01:25:18.8: ACP ERROR: Run failed due to script error (see ACP run log) 15-Jan-2014 01:25:18.8: ACP data acquisition failed for Observation SN_2013ej. 15-Jan-2014 01:25:18.8: (Observation SN_2013ej interrupted by acquisition process failure.) 15-Jan-2014 01:25:25.3: SelectRunning: No running plans 15-Jan-2014 01:25:25.3: Efficiency: Selecting from 4 pending plans: 15-Jan-2014 01:25:25.3: Selected Plan KT_Eri (TotEff=0.67) 15-Jan-2014 01:25:25.3: Dispatcher cycle time: 0.0780001 sec. 15-Jan-2014 01:25:25.3: Acquire data for Observation KT_Eri... 15-Jan-2014 01:25:25.4: (belongs to Project Nova_Monitoring, Plan KT_Eri) 15-Jan-2014 01:25:25.4: Send Observation KT_Eri to ACP Sequencer 15-Jan-2014 01:25:35.4: Sequencer is now active 15-Jan-2014 01:25:40.9: Sequencer is no longer active 15-Jan-2014 01:25:40.9: ** Sequencer script "AcquireScheduler" failed: 15-Jan-2014 01:25:40.9: **Script Error (Tracking has been stopped)** Source: ACP Message: The camera is not connected. at line 792 column 5. Script Context: 789: ' Support library 790: ' 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here => 792: Call SUP.Initialize() ' Do initialization (may log) ^ 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory 795: -- end -- 15-Jan-2014 01:25:44.0: Post-job status check done (stat=Running) 15-Jan-2014 01:25:44.0: ACP ERROR: Run failed due to script error (see ACP run log) 15-Jan-2014 01:25:44.0: ACP data acquisition failed for Observation KT_Eri. 15-Jan-2014 01:25:44.0: (Observation KT_Eri interrupted by acquisition process failure.) 15-Jan-2014 01:25:46.2: SelectRunning: No running plans 15-Jan-2014 01:25:46.2: Efficiency: Selecting from 3 pending plans: 15-Jan-2014 01:25:46.2: Selected Plan V0965_Per (TotEff=0.63) 15-Jan-2014 01:25:46.2: Dispatcher cycle time: 0.0624001 sec. 15-Jan-2014 01:25:46.2: Acquire data for Observation V0965_Per... 15-Jan-2014 01:25:46.2: (belongs to Project Nova_Monitoring, Plan V0965_Per) 15-Jan-2014 01:25:46.6: Send Observation V0965_Per to ACP Sequencer 15-Jan-2014 01:25:56.6: Sequencer is now active 15-Jan-2014 01:26:01.9: Sequencer is no longer active 15-Jan-2014 01:26:01.9: ** Sequencer script "AcquireScheduler" failed: 15-Jan-2014 01:26:01.9: **Script Error (Tracking has been stopped)** Source: ACP Message: The camera is not connected. at line 792 column 5. Script Context: 789: ' Support library 790: ' 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here => 792: Call SUP.Initialize() ' Do initialization (may log) ^ 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory 795: -- end -- 15-Jan-2014 01:26:05.0: Post-job status check done (stat=Running) 15-Jan-2014 01:26:05.0: ACP ERROR: Run failed due to script error (see ACP run log) 15-Jan-2014 01:26:05.0: ACP data acquisition failed for Observation V0965_Per. 15-Jan-2014 01:26:05.0: (Observation V0965_Per interrupted by acquisition process failure.) 15-Jan-2014 01:26:11.3: SelectRunning: No running plans 15-Jan-2014 01:26:11.3: Efficiency: Selecting from 2 pending plans: 15-Jan-2014 01:26:11.3: Selected Plan IC_348 (TotEff=0.50) 15-Jan-2014 01:26:11.3: Dispatcher cycle time: 0.0468001 sec. 15-Jan-2014 01:26:11.3: Acquire data for Observation IC_348... 15-Jan-2014 01:26:11.3: (belongs to Project Staels, Plan IC_348) 15-Jan-2014 01:26:11.7: Send Observation IC_348 to ACP Sequencer 15-Jan-2014 01:26:21.7: Sequencer is now active 15-Jan-2014 01:26:26.9: Sequencer is no longer active 15-Jan-2014 01:26:26.9: ** Sequencer script "AcquireScheduler" failed: 15-Jan-2014 01:26:26.9: **Script Error (Tracking has been stopped)** Source: ACP Message: The camera is not connected. at line 792 column 5. Script Context: 789: ' Support library 790: ' 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here => 792: Call SUP.Initialize() ' Do initialization (may log) ^ 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory 795: -- end -- 15-Jan-2014 01:26:30.0: Post-job status check done (stat=Running) 15-Jan-2014 01:26:30.0: ACP ERROR: Run failed due to script error (see ACP run log) 15-Jan-2014 01:26:30.0: ACP data acquisition failed for Observation IC_348. 15-Jan-2014 01:26:30.0: (Observation IC_348 interrupted by acquisition process failure.) 15-Jan-2014 01:26:36.6: SelectRunning: No running plans 15-Jan-2014 01:26:36.6: Efficiency: Only one pending plan V1184_Tau, it is the "best" 15-Jan-2014 01:26:36.6: Dispatcher cycle time: 0.0468001 sec. 15-Jan-2014 01:26:36.6: Acquire data for Observation V1184_Tau... 15-Jan-2014 01:26:36.6: (belongs to Project Staels, Plan V1184_Tau) 15-Jan-2014 01:26:36.6: Send Observation V1184_Tau to ACP Sequencer 15-Jan-2014 01:26:46.6: Sequencer is now active 15-Jan-2014 01:26:51.7: Sequencer is no longer active 15-Jan-2014 01:26:51.7: ** Sequencer script "AcquireScheduler" failed: 15-Jan-2014 01:26:51.7: **Script Error (Tracking has been stopped)** Source: ACP Message: The camera is not connected. at line 792 column 5. Script Context: 789: ' Support library 790: ' 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here => 792: Call SUP.Initialize() ' Do initialization (may log) ^ 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory 795: -- end -- 15-Jan-2014 01:26:54.8: Post-job status check done (stat=Running) 15-Jan-2014 01:26:54.8: ACP ERROR: Run failed due to script error (see ACP run log) 15-Jan-2014 01:26:54.8: ACP data acquisition failed for Observation V1184_Tau. 15-Jan-2014 01:26:54.8: (Observation V1184_Tau interrupted by acquisition process failure.) 15-Jan-2014 01:26:55.5: ++ Auto Focus ++ 15-Jan-2014 01:26:55.6: Doing periodic autofocus. 15-Jan-2014 01:26:55.6: Start special ACP AutoFocus script for scheduler 15-Jan-2014 01:27:05.6: Sequencer is now active 15-Jan-2014 01:27:11.5: Sequencer is no longer active 15-Jan-2014 01:27:11.5: ** Sequencer script "AutoFocusScheduler" failed: 15-Jan-2014 01:27:11.5: **Script Error (Tracking has been stopped)** Source: ACP Message: The camera is not connected. at line 38 column 5. Script Context: 35: Dim Filt, dtStart, buf, CT 36: 37: Set SUP = CreateObject("ACP.AcquireSupport") => 38: SUP.Initialize ^ 39: 40: dtStart = Util.SysUTCDate 41: buf = "AutoFocus-" & Util.FormatVar(dtStart, "dd-mmm-yyyy@HhNnSs") & ".log" ' Typical Log Name -- end -- 15-Jan-2014 01:27:11.5: ** Autofocus failed (n=3), will retry ASAP after 10 min. 15-Jan-2014 01:27:13.5: SelectRunning: No running plans 15-Jan-2014 01:27:13.5: No pending plans that can be started now. 15-Jan-2014 01:27:13.5: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:27:49.2: SelectRunning: No running plans 15-Jan-2014 01:27:49.2: No pending plans that can be started now. 15-Jan-2014 01:27:49.2: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:28:21.2: SelectRunning: No running plans 15-Jan-2014 01:28:21.2: No pending plans that can be started now. 15-Jan-2014 01:28:21.2: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:28:52.7: SelectRunning: No running plans 15-Jan-2014 01:28:52.7: No pending plans that can be started now. 15-Jan-2014 01:28:52.7: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:29:32.9: SelectRunning: No running plans 15-Jan-2014 01:29:32.9: Efficiency: Only one pending plan CB_32, it is the "best" 15-Jan-2014 01:29:33.0: Dispatcher cycle time: 0.0468001 sec. 15-Jan-2014 01:29:33.0: Acquire data for Observation CB_32... 15-Jan-2014 01:29:33.0: (belongs to Project Staels, Plan CB_32) 15-Jan-2014 01:29:33.0: Send Observation CB_32 to ACP Sequencer 15-Jan-2014 01:29:43.3: Sequencer is now active 15-Jan-2014 01:29:48.7: Sequencer is no longer active 15-Jan-2014 01:29:48.7: ** Sequencer script "AcquireScheduler" failed: 15-Jan-2014 01:29:48.7: **Script Error (Tracking has been stopped)** Source: ACP Message: The camera is not connected. at line 792 column 5. Script Context: 789: ' Support library 790: ' 791: Set SUP = CreateObject("ACP.AcquireSupport") ' Support methods here => 792: Call SUP.Initialize() ' Do initialization (may log) ^ 793: 794: cdir = ACPApp.Path & "\Calibration" ' Cal library directory 795: -- end -- 15-Jan-2014 01:29:51.8: Post-job status check done (stat=Running) 15-Jan-2014 01:29:51.8: ACP ERROR: Run failed due to script error (see ACP run log) 15-Jan-2014 01:29:51.8: ACP data acquisition failed for Observation CB_32. 15-Jan-2014 01:29:51.8: (Observation CB_32 interrupted by acquisition process failure.) 15-Jan-2014 01:29:58.0: SelectRunning: No running plans 15-Jan-2014 01:29:58.0: No pending plans that can be started now. 15-Jan-2014 01:29:58.0: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:30:37.6: SelectRunning: No running plans 15-Jan-2014 01:30:37.6: No pending plans that can be started now. 15-Jan-2014 01:30:37.6: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:31:15.6: SelectRunning: No running plans 15-Jan-2014 01:31:15.6: No pending plans that can be started now. 15-Jan-2014 01:31:15.6: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:31:55.1: SelectRunning: No running plans 15-Jan-2014 01:31:55.1: No pending plans that can be started now. 15-Jan-2014 01:31:55.1: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:32:26.6: SelectRunning: No running plans 15-Jan-2014 01:32:26.6: No pending plans that can be started now. 15-Jan-2014 01:32:26.6: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:32:58.0: SelectRunning: No running plans 15-Jan-2014 01:32:58.0: No pending plans that can be started now. 15-Jan-2014 01:32:58.0: Dispatcher cycle time: 0.0156001 sec. 15-Jan-2014 01:33:37.8: SelectRunning: No running plans 15-Jan-2014 01:33:37.8: No pending plans that can be started now. 15-Jan-2014 01:33:37.8: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:34:15.8: SelectRunning: No running plans 15-Jan-2014 01:34:15.8: No pending plans that can be started now. 15-Jan-2014 01:34:15.8: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:34:53.3: SelectRunning: No running plans 15-Jan-2014 01:34:53.3: No pending plans that can be started now. 15-Jan-2014 01:34:53.3: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:35:33.4: SelectRunning: No running plans 15-Jan-2014 01:35:33.4: No pending plans that can be started now. 15-Jan-2014 01:35:33.4: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:36:11.0: SelectRunning: No running plans 15-Jan-2014 01:36:11.0: No pending plans that can be started now. 15-Jan-2014 01:36:11.0: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:36:50.9: SelectRunning: No running plans 15-Jan-2014 01:36:50.9: No pending plans that can be started now. 15-Jan-2014 01:36:50.9: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:37:29.6: ++ Auto Focus ++ 15-Jan-2014 01:37:29.7: Doing periodic autofocus. 15-Jan-2014 01:37:29.7: Start special ACP AutoFocus script for scheduler 15-Jan-2014 01:37:40.0: Sequencer is now active 15-Jan-2014 01:37:45.1: Sequencer is no longer active 15-Jan-2014 01:37:45.1: ** Sequencer script "AutoFocusScheduler" failed: 15-Jan-2014 01:37:45.1: **Script Error (Tracking has been stopped)** Source: ACP Message: The camera is not connected. at line 38 column 5. Script Context: 35: Dim Filt, dtStart, buf, CT 36: 37: Set SUP = CreateObject("ACP.AcquireSupport") => 38: SUP.Initialize ^ 39: 40: dtStart = Util.SysUTCDate 41: buf = "AutoFocus-" & Util.FormatVar(dtStart, "dd-mmm-yyyy@HhNnSs") & ".log" ' Typical Log Name -- end -- 15-Jan-2014 01:37:45.1: ** Autofocus failed (n=4), will retry ASAP after 15 min. 15-Jan-2014 01:37:47.0: SelectRunning: No running plans 15-Jan-2014 01:37:47.0: No pending plans that can be started now. 15-Jan-2014 01:37:47.0: Dispatcher cycle time: 0.0156 sec. 15-Jan-2014 01:38:25.1: SelectRunning: No running plans 15-Jan-2014 01:38:25.1: No pending plans that can be started now. 15-Jan-2014 01:38:25.1: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:39:03.1: SelectRunning: No running plans 15-Jan-2014 01:39:03.1: No pending plans that can be started now. 15-Jan-2014 01:39:03.1: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:39:40.5: SelectRunning: No running plans 15-Jan-2014 01:39:40.5: No pending plans that can be started now. 15-Jan-2014 01:39:40.5: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:40:16.3: SelectRunning: No running plans 15-Jan-2014 01:40:16.3: No pending plans that can be started now. 15-Jan-2014 01:40:16.3: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:40:54.2: SelectRunning: No running plans 15-Jan-2014 01:40:54.2: No pending plans that can be started now. 15-Jan-2014 01:40:54.2: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:41:32.2: SelectRunning: No running plans 15-Jan-2014 01:41:32.2: No pending plans that can be started now. 15-Jan-2014 01:41:32.2: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:42:07.5: SelectRunning: No running plans 15-Jan-2014 01:42:07.5: No pending plans that can be started now. 15-Jan-2014 01:42:07.5: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:42:38.3: SelectRunning: No running plans 15-Jan-2014 01:42:38.3: No pending plans that can be started now. 15-Jan-2014 01:42:38.3: Dispatcher cycle time: 0.0156001 sec. 15-Jan-2014 01:43:16.8: SelectRunning: No running plans 15-Jan-2014 01:43:16.8: No pending plans that can be started now. 15-Jan-2014 01:43:16.8: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:43:54.2: SelectRunning: No running plans 15-Jan-2014 01:43:54.2: No pending plans that can be started now. 15-Jan-2014 01:43:54.2: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:44:26.1: SelectRunning: No running plans 15-Jan-2014 01:44:26.1: No pending plans that can be started now. 15-Jan-2014 01:44:26.1: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:44:57.6: SelectRunning: No running plans 15-Jan-2014 01:44:57.6: No pending plans that can be started now. 15-Jan-2014 01:44:57.6: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:45:29.0: SelectRunning: No running plans 15-Jan-2014 01:45:29.0: No pending plans that can be started now. 15-Jan-2014 01:45:29.0: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:46:00.4: SelectRunning: No running plans 15-Jan-2014 01:46:00.4: No pending plans that can be started now. 15-Jan-2014 01:46:00.4: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:46:40.2: SelectRunning: No running plans 15-Jan-2014 01:46:40.2: No pending plans that can be started now. 15-Jan-2014 01:46:40.2: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:47:20.3: SelectRunning: No running plans 15-Jan-2014 01:47:20.3: No pending plans that can be started now. 15-Jan-2014 01:47:20.3: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:47:57.6: SelectRunning: No running plans 15-Jan-2014 01:47:57.6: No pending plans that can be started now. 15-Jan-2014 01:47:57.6: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:48:33.3: SelectRunning: No running plans 15-Jan-2014 01:48:33.3: No pending plans that can be started now. 15-Jan-2014 01:48:33.3: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:49:10.4: SelectRunning: No running plans 15-Jan-2014 01:49:10.4: No pending plans that can be started now. 15-Jan-2014 01:49:10.4: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:49:42.6: SelectRunning: No running plans 15-Jan-2014 01:49:42.6: No pending plans that can be started now. 15-Jan-2014 01:49:42.6: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:50:20.5: SelectRunning: No running plans 15-Jan-2014 01:50:20.5: No pending plans that can be started now. 15-Jan-2014 01:50:20.5: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:50:54.9: SelectRunning: No running plans 15-Jan-2014 01:50:54.9: No pending plans that can be started now. 15-Jan-2014 01:50:54.9: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:51:31.7: SelectRunning: No running plans 15-Jan-2014 01:51:31.7: No pending plans that can be started now. 15-Jan-2014 01:51:31.7: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:52:09.6: SelectRunning: No running plans 15-Jan-2014 01:52:09.6: Obs MP_Gem in Plan MP_Gem was vetoed by MoonAvoid constraint. 15-Jan-2014 01:52:09.6: MoonAvoid estimates ready after 15-Jan-2014 13:52:09 UTC 15-Jan-2014 01:52:09.6: No pending plans that can be started now. 15-Jan-2014 01:52:09.6: Dispatcher cycle time: 0.0156001 sec. 15-Jan-2014 01:52:41.0: SelectRunning: No running plans 15-Jan-2014 01:52:41.0: No pending plans that can be started now. 15-Jan-2014 01:52:41.0: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:53:19.7: ++ Auto Focus ++ 15-Jan-2014 01:53:19.7: Doing periodic autofocus. 15-Jan-2014 01:53:19.7: Start special ACP AutoFocus script for scheduler 15-Jan-2014 01:53:29.7: Sequencer is now active 15-Jan-2014 01:53:34.8: Sequencer is no longer active 15-Jan-2014 01:53:34.8: ** Sequencer script "AutoFocusScheduler" failed: 15-Jan-2014 01:53:34.8: **Script Error (Tracking has been stopped)** Source: ACP Message: The camera is not connected. at line 38 column 5. Script Context: 35: Dim Filt, dtStart, buf, CT 36: 37: Set SUP = CreateObject("ACP.AcquireSupport") => 38: SUP.Initialize ^ 39: 40: dtStart = Util.SysUTCDate 41: buf = "AutoFocus-" & Util.FormatVar(dtStart, "dd-mmm-yyyy@HhNnSs") & ".log" ' Typical Log Name -- end -- 15-Jan-2014 01:53:34.8: ** Autofocus failed (n=5), will retry ASAP after 20 min. 15-Jan-2014 01:53:36.9: SelectRunning: No running plans 15-Jan-2014 01:53:36.9: No pending plans that can be started now. 15-Jan-2014 01:53:36.9: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:54:17.4: SelectRunning: No running plans 15-Jan-2014 01:54:17.4: No pending plans that can be started now. 15-Jan-2014 01:54:17.4: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:54:53.3: SelectRunning: No running plans 15-Jan-2014 01:54:53.3: No pending plans that can be started now. 15-Jan-2014 01:54:53.3: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:55:28.7: SelectRunning: No running plans 15-Jan-2014 01:55:28.7: No pending plans that can be started now. 15-Jan-2014 01:55:28.7: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:56:09.1: SelectRunning: No running plans 15-Jan-2014 01:56:09.1: No pending plans that can be started now. 15-Jan-2014 01:56:09.1: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:56:46.3: SelectRunning: No running plans 15-Jan-2014 01:56:46.3: No pending plans that can be started now. 15-Jan-2014 01:56:46.3: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:57:17.6: SelectRunning: No running plans 15-Jan-2014 01:57:17.6: No pending plans that can be started now. 15-Jan-2014 01:57:17.6: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:57:54.1: SelectRunning: No running plans 15-Jan-2014 01:57:54.1: No pending plans that can be started now. 15-Jan-2014 01:57:54.1: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:58:33.3: SelectRunning: No running plans 15-Jan-2014 01:58:33.3: No pending plans that can be started now. 15-Jan-2014 01:58:33.3: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:59:04.5: SelectRunning: No running plans 15-Jan-2014 01:59:04.5: No pending plans that can be started now. 15-Jan-2014 01:59:04.5: Dispatcher cycle time: 0 sec. 15-Jan-2014 01:59:39.4: SelectRunning: No running plans 15-Jan-2014 01:59:39.4: No pending plans that can be started now. 15-Jan-2014 01:59:39.4: Dispatcher cycle time: 0 sec. 15-Jan-2014 02:00:20.2: SelectRunning: No running plans 15-Jan-2014 02:00:20.2: No pending plans that can be started now. 15-Jan-2014 02:00:20.2: Dispatcher cycle time: 0 sec. 15-Jan-2014 02:01:00.3: SelectRunning: No running plans 15-Jan-2014 02:01:00.3: No pending plans that can be started now. 15-Jan-2014 02:01:00.3: Dispatcher cycle time: 0 sec. 15-Jan-2014 02:01:35.8: SelectRunning: No running plans 15-Jan-2014 02:01:35.8: No pending plans that can be started now. 15-Jan-2014 02:01:35.8: Dispatcher cycle time: 0 sec. 15-Jan-2014 02:02:11.6: SelectRunning: No running plans 15-Jan-2014 02:02:11.6: No pending plans that can be started now. 15-Jan-2014 02:02:11.6: Dispatcher cycle time: 0 sec. 15-Jan-2014 02:02:46.2: SelectRunning: No running plans 15-Jan-2014 02:02:46.2: No pending plans that can be started now. 15-Jan-2014 02:02:46.2: Dispatcher cycle time: 0 sec. 15-Jan-2014 02:03:24.7: SelectRunning: No running plans 15-Jan-2014 02:03:24.7: No pending plans that can be started now. 15-Jan-2014 02:03:24.7: Dispatcher cycle time: 0 sec. 15-Jan-2014 02:03:40.2: Dispatcher stopped at 15-Jan-2014 02:03:40 UTC 15-Jan-2014 02:03:40.2: **DISPATCHER INTERRUPT LEVEL 1 RECEIVED** 15-Jan-2014 02:12:24.5: COMException while trying to get ACP Weather.Available. Probably operator script abort. 15-Jan-2014 02:12:24.5: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA) 15-Jan-2014 02:12:25.5: COMException while trying to get ACP Weather.Available. Probably operator script abort. 15-Jan-2014 02:12:25.5: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA) 15-Jan-2014 02:12:26.5: COMException while trying to get ACP Weather.Available. Probably operator script abort. 15-Jan-2014 02:12:26.5: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA) 15-Jan-2014 02:12:27.5: COMException while trying to get ACP Weather.Available. Probably operator script abort. 15-Jan-2014 02:12:27.5: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA) 15-Jan-2014 02:12:28.5: COMException while trying to get ACP Weather.Available. Probably operator script abort. 15-Jan-2014 02:12:28.5: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)