Log opened at Wed, Oct 23 2013 01:04:22 UTC (actual time) Current log level is Verbose Scheduler version 3.5.3 Multi-user license: Arne Henden 23-Oct-2013 01:04:22.5: Simulated clock initialized at 23-Oct-2013 01:04:22 UTC 23-Oct-2013 01:04:22.5: Loaded Constraint plugin AirMass 23-Oct-2013 01:04:22.5: Loaded Constraint plugin AirmassRange 23-Oct-2013 01:04:22.5: Loaded Constraint plugin Horizon 23-Oct-2013 01:04:22.5: Loaded Constraint plugin HourAngle 23-Oct-2013 01:04:22.5: Loaded Constraint plugin MoonAvoid 23-Oct-2013 01:04:22.5: Loaded Constraint plugin MoonDown 23-Oct-2013 01:04:22.5: Loaded Constraint plugin SkyCondition 23-Oct-2013 01:04:22.5: Loaded Constraint plugin TimeRange 23-Oct-2013 01:04:23.1: 84 plans are now pending. 23-Oct-2013 01:04:23.1: Attach ACP sequencer 23-Oct-2013 01:04:29.3: Weather successfully connected. Wait for valid data... 23-Oct-2013 01:55:57.6: Dispatcher started at 23-Oct-2013 01:55:57 UTC 23-Oct-2013 01:55:57.6: Priority: W[0]=1.00 23-Oct-2013 01:55:57.6: Transit Altitude: W[1]=0.00 23-Oct-2013 01:55:57.6: Highest Altitude: W[6]=0.00 23-Oct-2013 01:55:57.6: Lateness: W[5]=0.70 23-Oct-2013 01:55:57.6: Slew Distance: W[2]=0.30 23-Oct-2013 01:55:57.6: Retry Count: W[3]=0.20 23-Oct-2013 01:55:57.6: Meridian Crossing: W[4]=0.30 23-Oct-2013 01:55:57.6: Obs Conditions: W[7]=0.40 23-Oct-2013 01:55:57.6: Rising Plan Delay: disabled 23-Oct-2013 01:55:58.0: ++ Observatory Startup ++ 23-Oct-2013 01:55:58.0: Start ACP Sequencer's StartupObs script 23-Oct-2013 01:56:17.0: Open the observatory dome/roof 23-Oct-2013 01:57:38.0: ++ Auto Focus ++ 23-Oct-2013 01:57:38.0: Doing initial autofocus. 23-Oct-2013 01:57:38.0: Start special ACP AutoFocus script for scheduler 23-Oct-2013 01:57:53.1: ** Sequencer script "AutoFocusScheduler" failed: 23-Oct-2013 01:57:53.1: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 68 column 9. Script Context: 65: If Util.Prefs.AutoFocus.UseAcquireStar Then 66: Telescope.Tracking = True ' AcquireStar needs tracking scope 67: Else => 68: Call SUP.StartSlewJ2000("FocusArea", CT.RightAscension, CT.Declination) ^ 69: Call SUP.WaitForSlew() 70: End If 71: -- end -- 23-Oct-2013 01:57:53.1: ** Autofocus failed (n=1), will retry ASAP after 0 min. 23-Oct-2013 01:57:54.6: Plan V339_Del has Monitor Mode. Time to resubmit it. 23-Oct-2013 01:57:55.3: Dispatcher cycle time: 2.1684038 sec. 23-Oct-2013 01:57:55.3: Acquire data for Observation V339_Del... 23-Oct-2013 01:57:55.3: (belongs to Project AAVSO_Monitoring, Plan V339_Del) 23-Oct-2013 01:57:55.3: Doing 40 sets 23-Oct-2013 01:57:55.3: Send Observation V339_Del to ACP Sequencer 23-Oct-2013 01:58:10.4: ** Sequencer script "AcquireScheduler" failed: 23-Oct-2013 01:58:10.4: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 23-Oct-2013 01:58:13.5: ACP ERROR: Run failed due to script error (see ACP run log) 23-Oct-2013 01:58:13.5: ACP data acquisition failed for Observation V339_Del. 23-Oct-2013 01:58:13.5: (Observation V339_Del interrupted by acquisition process failure.) 23-Oct-2013 01:58:13.6: ++ Auto Focus ++ 23-Oct-2013 01:58:13.7: Doing periodic autofocus. 23-Oct-2013 01:58:13.7: Start special ACP AutoFocus script for scheduler 23-Oct-2013 01:58:30.6: ** Sequencer script "AutoFocusScheduler" failed: 23-Oct-2013 01:58:30.6: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 68 column 9. Script Context: 65: If Util.Prefs.AutoFocus.UseAcquireStar Then 66: Telescope.Tracking = True ' AcquireStar needs tracking scope 67: Else => 68: Call SUP.StartSlewJ2000("FocusArea", CT.RightAscension, CT.Declination) ^ 69: Call SUP.WaitForSlew() 70: End If 71: -- end -- 23-Oct-2013 01:58:30.6: ** Autofocus failed (n=2), will retry ASAP after 5 min. 23-Oct-2013 01:58:30.8: Dispatcher cycle time: 0.2340004 sec. 23-Oct-2013 01:58:30.8: Acquire data for Observation SA112_810... 23-Oct-2013 01:58:30.8: (belongs to Project Landolt_1, Plan SA112_810) 23-Oct-2013 01:58:30.8: Send Observation SA112_810 to ACP Sequencer 23-Oct-2013 01:58:45.9: ** Sequencer script "AcquireScheduler" failed: 23-Oct-2013 01:58:45.9: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 23-Oct-2013 01:58:49.0: ACP ERROR: Run failed due to script error (see ACP run log) 23-Oct-2013 01:58:49.0: ACP data acquisition failed for Observation SA112_810. 23-Oct-2013 01:58:49.0: (Observation SA112_810 interrupted by acquisition process failure.) 23-Oct-2013 01:58:49.4: Dispatcher cycle time: 0.2184004 sec. 23-Oct-2013 01:58:49.4: Acquire data for Observation SA84... 23-Oct-2013 01:58:49.4: (belongs to Project Landolt_2, Plan SA84) 23-Oct-2013 01:58:49.4: Send Observation SA84 to ACP Sequencer 23-Oct-2013 01:59:04.5: ** Sequencer script "AcquireScheduler" failed: 23-Oct-2013 01:59:04.5: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 23-Oct-2013 01:59:07.6: ACP ERROR: Run failed due to script error (see ACP run log) 23-Oct-2013 01:59:07.6: ACP data acquisition failed for Observation SA84. 23-Oct-2013 01:59:07.6: (Observation SA84 interrupted by acquisition process failure.) 23-Oct-2013 01:59:07.9: Dispatcher cycle time: 0.2340004 sec. 23-Oct-2013 01:59:07.9: Acquire data for Observation V496_Sct... 23-Oct-2013 01:59:07.9: (belongs to Project Nova_Monitoring, Plan V496_Sct) 23-Oct-2013 01:59:07.9: Send Observation V496_Sct to ACP Sequencer 23-Oct-2013 01:59:29.2: ** Sequencer script "AcquireScheduler" failed: 23-Oct-2013 01:59:29.2: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 23-Oct-2013 01:59:32.3: ACP ERROR: Run failed due to script error (see ACP run log) 23-Oct-2013 01:59:32.3: ACP data acquisition failed for Observation V496_Sct. 23-Oct-2013 01:59:32.3: (Observation V496_Sct interrupted by acquisition process failure.) 23-Oct-2013 01:59:32.6: Dispatcher cycle time: 0.2184003 sec. 23-Oct-2013 01:59:32.6: Acquire data for Observation V1723_Aql... 23-Oct-2013 01:59:32.6: (belongs to Project Nova_Monitoring, Plan V1723_Aql) 23-Oct-2013 01:59:32.6: Send Observation V1723_Aql to ACP Sequencer 23-Oct-2013 01:59:47.7: ** Sequencer script "AcquireScheduler" failed: 23-Oct-2013 01:59:47.7: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 23-Oct-2013 01:59:50.8: ACP ERROR: Run failed due to script error (see ACP run log) 23-Oct-2013 01:59:50.8: ACP data acquisition failed for Observation V1723_Aql. 23-Oct-2013 01:59:50.8: (Observation V1723_Aql interrupted by acquisition process failure.) 23-Oct-2013 01:59:51.1: Dispatcher cycle time: 0.2028004 sec. 23-Oct-2013 01:59:51.1: Acquire data for Observation SA111... 23-Oct-2013 01:59:51.1: (belongs to Project Landolt_1, Plan SA111) 23-Oct-2013 01:59:51.1: Send Observation SA111 to ACP Sequencer 23-Oct-2013 02:00:06.2: ** Sequencer script "AcquireScheduler" failed: 23-Oct-2013 02:00:06.2: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 23-Oct-2013 02:00:09.3: ACP ERROR: Run failed due to script error (see ACP run log) 23-Oct-2013 02:00:09.3: ACP data acquisition failed for Observation SA111. 23-Oct-2013 02:00:09.3: (Observation SA111 interrupted by acquisition process failure.) 23-Oct-2013 02:00:09.9: Dispatcher cycle time: 0.1872003 sec. 23-Oct-2013 02:00:09.9: Acquire data for Observation SA1119... 23-Oct-2013 02:00:09.9: (belongs to Project Landolt_1, Plan SA1119) 23-Oct-2013 02:00:09.9: Send Observation SA1119 to ACP Sequencer 23-Oct-2013 02:00:25.2: ** Sequencer script "AcquireScheduler" failed: 23-Oct-2013 02:00:25.2: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 23-Oct-2013 02:00:28.3: ACP ERROR: Run failed due to script error (see ACP run log) 23-Oct-2013 02:00:28.3: ACP data acquisition failed for Observation SA1119. 23-Oct-2013 02:00:28.3: (Observation SA1119 interrupted by acquisition process failure.) 23-Oct-2013 02:00:28.6: Dispatcher cycle time: 0.1716003 sec. 23-Oct-2013 02:00:28.6: Acquire data for Observation V1724_Aql... 23-Oct-2013 02:00:28.6: (belongs to Project Nova_Monitoring, Plan V1724_Aql) 23-Oct-2013 02:00:28.9: Send Observation V1724_Aql to ACP Sequencer 23-Oct-2013 02:00:44.0: ** Sequencer script "AcquireScheduler" failed: 23-Oct-2013 02:00:44.0: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 23-Oct-2013 02:00:47.1: ACP ERROR: Run failed due to script error (see ACP run log) 23-Oct-2013 02:00:47.1: ACP data acquisition failed for Observation V1724_Aql. 23-Oct-2013 02:00:47.1: (Observation V1724_Aql interrupted by acquisition process failure.) 23-Oct-2013 02:00:47.4: Dispatcher cycle time: 0.1716003 sec. 23-Oct-2013 02:00:47.4: Acquire data for Observation V1721_Aql... 23-Oct-2013 02:00:47.4: (belongs to Project Nova_Monitoring, Plan V1721_Aql) 23-Oct-2013 02:00:47.4: Send Observation V1721_Aql to ACP Sequencer 23-Oct-2013 02:01:02.5: ** Sequencer script "AcquireScheduler" failed: 23-Oct-2013 02:01:02.5: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 23-Oct-2013 02:01:05.6: ACP ERROR: Run failed due to script error (see ACP run log) 23-Oct-2013 02:01:05.6: ACP data acquisition failed for Observation V1721_Aql. 23-Oct-2013 02:01:05.6: (Observation V1721_Aql interrupted by acquisition process failure.) 23-Oct-2013 02:01:05.9: Dispatcher cycle time: 0.1716003 sec. 23-Oct-2013 02:01:05.9: Acquire data for Observation V1722_Aql... 23-Oct-2013 02:01:05.9: (belongs to Project Nova_Monitoring, Plan V1722_Aql) 23-Oct-2013 02:01:05.9: Send Observation V1722_Aql to ACP Sequencer 23-Oct-2013 02:01:21.1: ** Sequencer script "AcquireScheduler" failed: 23-Oct-2013 02:01:21.1: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 23-Oct-2013 02:01:24.2: ACP ERROR: Run failed due to script error (see ACP run log) 23-Oct-2013 02:01:24.2: ACP data acquisition failed for Observation V1722_Aql. 23-Oct-2013 02:01:24.2: (Observation V1722_Aql interrupted by acquisition process failure.) 23-Oct-2013 02:01:24.4: Dispatcher cycle time: 0.1404003 sec. 23-Oct-2013 02:01:24.4: Acquire data for Observation SA116_180... 23-Oct-2013 02:01:24.4: (belongs to Project Landolt_2, Plan SA116_180) 23-Oct-2013 02:01:24.4: Send Observation SA116_180 to ACP Sequencer 23-Oct-2013 02:01:39.6: ** Sequencer script "AcquireScheduler" failed: 23-Oct-2013 02:01:39.6: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 23-Oct-2013 02:01:42.7: ACP ERROR: Run failed due to script error (see ACP run log) 23-Oct-2013 02:01:42.7: ACP data acquisition failed for Observation SA116_180. 23-Oct-2013 02:01:42.7: (Observation SA116_180 interrupted by acquisition process failure.) 23-Oct-2013 02:01:42.9: Dispatcher cycle time: 0.1248002 sec. 23-Oct-2013 02:01:42.9: Acquire data for Observation V2491_Cyg... 23-Oct-2013 02:01:42.9: (belongs to Project Nova_Monitoring, Plan V2491_Cyg) 23-Oct-2013 02:01:43.0: Send Observation V2491_Cyg to ACP Sequencer 23-Oct-2013 02:01:58.6: ** Sequencer script "AcquireScheduler" failed: 23-Oct-2013 02:01:58.6: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 23-Oct-2013 02:02:01.7: ACP ERROR: Run failed due to script error (see ACP run log) 23-Oct-2013 02:02:01.7: ACP data acquisition failed for Observation V2491_Cyg. 23-Oct-2013 02:02:01.7: (Observation V2491_Cyg interrupted by acquisition process failure.) 23-Oct-2013 02:02:01.9: Dispatcher cycle time: 0.1404003 sec. 23-Oct-2013 02:02:01.9: Acquire data for Observation V2468_Cyg... 23-Oct-2013 02:02:01.9: (belongs to Project Nova_Monitoring, Plan V2468_Cyg) 23-Oct-2013 02:02:01.9: Send Observation V2468_Cyg to ACP Sequencer 23-Oct-2013 02:02:41.4: ** Sequencer script "AcquireScheduler" failed: 23-Oct-2013 02:02:41.4: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 23-Oct-2013 02:02:44.5: ACP ERROR: Run failed due to script error (see ACP run log) 23-Oct-2013 02:02:44.5: ACP data acquisition failed for Observation V2468_Cyg. 23-Oct-2013 02:02:44.5: (Observation V2468_Cyg interrupted by acquisition process failure.) 23-Oct-2013 02:02:44.7: Dispatcher cycle time: 0.1092002 sec. 23-Oct-2013 02:02:44.7: Acquire data for Observation SA44_28... 23-Oct-2013 02:02:44.7: (belongs to Project Landolt_1, Plan SA44_28) 23-Oct-2013 02:02:44.7: Send Observation SA44_28 to ACP Sequencer 23-Oct-2013 02:02:59.8: ** Sequencer script "AcquireScheduler" failed: 23-Oct-2013 02:02:59.8: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 23-Oct-2013 02:03:02.9: ACP ERROR: Run failed due to script error (see ACP run log) 23-Oct-2013 02:03:02.9: ACP data acquisition failed for Observation SA44_28. 23-Oct-2013 02:03:02.9: (Observation SA44_28 interrupted by acquisition process failure.) 23-Oct-2013 02:03:03.4: Dispatcher cycle time: 0.0936001 sec. 23-Oct-2013 02:03:03.4: Acquire data for Observation V0809_Cep... 23-Oct-2013 02:03:03.4: (belongs to Project Nova_Monitoring, Plan V0809_Cep) 23-Oct-2013 02:03:03.4: Send Observation V0809_Cep to ACP Sequencer 23-Oct-2013 02:03:41.2: ** Sequencer script "AcquireScheduler" failed: 23-Oct-2013 02:03:41.2: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 23-Oct-2013 02:03:44.3: ACP ERROR: Run failed due to script error (see ACP run log) 23-Oct-2013 02:03:44.3: ACP data acquisition failed for Observation V0809_Cep. 23-Oct-2013 02:03:44.3: (Observation V0809_Cep interrupted by acquisition process failure.) 23-Oct-2013 02:03:44.4: ++ Auto Focus ++ 23-Oct-2013 02:03:44.5: Doing periodic autofocus. 23-Oct-2013 02:03:44.5: Start special ACP AutoFocus script for scheduler 23-Oct-2013 02:03:59.5: ** Sequencer script "AutoFocusScheduler" failed: 23-Oct-2013 02:03:59.5: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 68 column 9. Script Context: 65: If Util.Prefs.AutoFocus.UseAcquireStar Then 66: Telescope.Tracking = True ' AcquireStar needs tracking scope 67: Else => 68: Call SUP.StartSlewJ2000("FocusArea", CT.RightAscension, CT.Declination) ^ 69: Call SUP.WaitForSlew() 70: End If 71: -- end -- 23-Oct-2013 02:03:59.5: ** Autofocus failed (n=3), will retry ASAP after 10 min. 23-Oct-2013 02:03:59.6: Dispatcher cycle time: 0.0780001 sec. 23-Oct-2013 02:03:59.6: Acquire data for Observation SN_2013dy... 23-Oct-2013 02:03:59.6: (belongs to Project AAVSO_Monitoring, Plan SN_2013dy) 23-Oct-2013 02:03:59.6: Send Observation SN_2013dy to ACP Sequencer 23-Oct-2013 02:04:46.2: ** Sequencer script "AcquireScheduler" failed: 23-Oct-2013 02:04:46.2: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 23-Oct-2013 02:04:49.2: ACP ERROR: Run failed due to script error (see ACP run log) 23-Oct-2013 02:04:49.2: ACP data acquisition failed for Observation SN_2013dy. 23-Oct-2013 02:04:49.2: (Observation SN_2013dy interrupted by acquisition process failure.) 23-Oct-2013 02:04:49.4: Dispatcher cycle time: 0.0780001 sec. 23-Oct-2013 02:04:49.4: Acquire data for Observation V1404_Cyg... 23-Oct-2013 02:04:49.4: (belongs to Project Walker, Plan V1404_Cyg) 23-Oct-2013 02:04:49.4: Send Observation V1404_Cyg to ACP Sequencer 23-Oct-2013 02:05:32.5: ** Sequencer script "AcquireScheduler" failed: 23-Oct-2013 02:05:32.5: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 23-Oct-2013 02:05:35.6: ACP ERROR: Run failed due to script error (see ACP run log) 23-Oct-2013 02:05:35.6: ACP data acquisition failed for Observation V1404_Cyg. 23-Oct-2013 02:05:35.6: (Observation V1404_Cyg interrupted by acquisition process failure.) 23-Oct-2013 02:05:35.8: Dispatcher cycle time: 0.0624001 sec. 23-Oct-2013 02:05:35.8: Acquire data for Observation GSC_3649-0825... 23-Oct-2013 02:05:35.8: (belongs to Project Staels, Plan GSC_3649-0825) 23-Oct-2013 02:05:35.8: Send Observation GSC_3649-0825 to ACP Sequencer 23-Oct-2013 02:05:51.4: ** Sequencer script "AcquireScheduler" failed: 23-Oct-2013 02:05:51.4: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 23-Oct-2013 02:05:54.5: ACP ERROR: Run failed due to script error (see ACP run log) 23-Oct-2013 02:05:54.5: ACP data acquisition failed for Observation GSC_3649-0825. 23-Oct-2013 02:05:54.5: (Observation GSC_3649-0825 interrupted by acquisition process failure.) 23-Oct-2013 02:05:54.7: Dispatcher cycle time: 0.0468001 sec. 23-Oct-2013 02:05:54.7: Acquire data for Observation 2MASS_23275353+5214532... 23-Oct-2013 02:05:54.7: (belongs to Project Staels, Plan 2MASS_23275353+5214532) 23-Oct-2013 02:05:54.7: Send Observation 2MASS_23275353+5214532 to ACP Sequencer 23-Oct-2013 02:06:35.5: ** Sequencer script "AcquireScheduler" failed: 23-Oct-2013 02:06:35.5: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 23-Oct-2013 02:06:38.6: ACP ERROR: Run failed due to script error (see ACP run log) 23-Oct-2013 02:06:38.6: ACP data acquisition failed for Observation 2MASS_23275353+5214532. 23-Oct-2013 02:06:38.6: (Observation 2MASS_23275353+5214532 interrupted by acquisition process failure.) 23-Oct-2013 02:14:19.5: ++ Auto Focus ++ 23-Oct-2013 02:14:19.6: Doing periodic autofocus. 23-Oct-2013 02:14:19.6: Start special ACP AutoFocus script for scheduler 23-Oct-2013 02:14:35.3: ** Sequencer script "AutoFocusScheduler" failed: 23-Oct-2013 02:14:35.3: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 68 column 9. Script Context: 65: If Util.Prefs.AutoFocus.UseAcquireStar Then 66: Telescope.Tracking = True ' AcquireStar needs tracking scope 67: Else => 68: Call SUP.StartSlewJ2000("FocusArea", CT.RightAscension, CT.Declination) ^ 69: Call SUP.WaitForSlew() 70: End If 71: -- end -- 23-Oct-2013 02:14:35.3: ** Autofocus failed (n=4), will retry ASAP after 15 min. 23-Oct-2013 02:15:36.4: Dispatcher cycle time: 0.0468001 sec. 23-Oct-2013 02:15:36.4: Acquire data for Observation SA68_216... 23-Oct-2013 02:15:36.4: (belongs to Project Landolt_1, Plan SA68_216) 23-Oct-2013 02:15:36.4: Send Observation SA68_216 to ACP Sequencer 23-Oct-2013 02:15:52.1: ** Sequencer script "AcquireScheduler" failed: 23-Oct-2013 02:15:52.1: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 23-Oct-2013 02:15:55.2: ACP ERROR: Run failed due to script error (see ACP run log) 23-Oct-2013 02:15:55.2: ACP data acquisition failed for Observation SA68_216. 23-Oct-2013 02:15:55.2: (Observation SA68_216 interrupted by acquisition process failure.) 23-Oct-2013 02:20:01.8: Dispatcher cycle time: 0.0468 sec. 23-Oct-2013 02:20:01.8: Acquire data for Observation SA109... 23-Oct-2013 02:20:01.8: (belongs to Project Landolt_2, Plan SA109) 23-Oct-2013 02:20:01.8: Send Observation SA109 to ACP Sequencer 23-Oct-2013 02:20:17.3: ** Sequencer script "AcquireScheduler" failed: 23-Oct-2013 02:20:17.3: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 23-Oct-2013 02:20:20.4: ACP ERROR: Run failed due to script error (see ACP run log) 23-Oct-2013 02:20:20.4: ACP data acquisition failed for Observation SA109. 23-Oct-2013 02:20:20.4: (Observation SA109 interrupted by acquisition process failure.) 23-Oct-2013 02:30:04.7: ++ Auto Focus ++ 23-Oct-2013 02:30:04.7: Doing periodic autofocus. 23-Oct-2013 02:30:04.7: Start special ACP AutoFocus script for scheduler 23-Oct-2013 02:30:20.8: ** Sequencer script "AutoFocusScheduler" failed: 23-Oct-2013 02:30:20.8: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 68 column 9. Script Context: 65: If Util.Prefs.AutoFocus.UseAcquireStar Then 66: Telescope.Tracking = True ' AcquireStar needs tracking scope 67: Else => 68: Call SUP.StartSlewJ2000("FocusArea", CT.RightAscension, CT.Declination) ^ 69: Call SUP.WaitForSlew() 70: End If 71: -- end -- 23-Oct-2013 02:30:20.8: ** Autofocus failed (n=5), will retry ASAP after 20 min. 23-Oct-2013 02:48:19.7: Dispatcher cycle time: 0.0468 sec. 23-Oct-2013 02:48:19.7: Acquire data for Observation SA61... 23-Oct-2013 02:48:19.7: (belongs to Project Landolt_2, Plan SA61) 23-Oct-2013 02:48:19.7: Send Observation SA61 to ACP Sequencer 23-Oct-2013 02:48:35.2: ** Sequencer script "AcquireScheduler" failed: 23-Oct-2013 02:48:35.2: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. Script Context: 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 1739: End If 1740: Else => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW ^ 1742: End If 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 1744: -- end -- 23-Oct-2013 02:48:38.3: ACP ERROR: Run failed due to script error (see ACP run log) 23-Oct-2013 02:48:38.3: ACP data acquisition failed for Observation SA61. 23-Oct-2013 02:48:38.3: (Observation SA61 interrupted by acquisition process failure.) 23-Oct-2013 02:50:40.5: ++ Auto Focus ++ 23-Oct-2013 02:50:40.5: Doing periodic autofocus. 23-Oct-2013 02:50:40.5: Start special ACP AutoFocus script for scheduler 23-Oct-2013 02:50:55.9: ** Sequencer script "AutoFocusScheduler" failed: 23-Oct-2013 02:50:55.9: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 68 column 9. Script Context: 65: If Util.Prefs.AutoFocus.UseAcquireStar Then 66: Telescope.Tracking = True ' AcquireStar needs tracking scope 67: Else => 68: Call SUP.StartSlewJ2000("FocusArea", CT.RightAscension, CT.Declination) ^ 69: Call SUP.WaitForSlew() 70: End If 71: -- end -- 23-Oct-2013 02:50:55.9: ** Autofocus failed (n=6), will retry ASAP after 20 min. 23-Oct-2013 03:10:57.5: ++ Auto Focus ++ 23-Oct-2013 03:10:57.5: Doing periodic autofocus. 23-Oct-2013 03:10:57.5: Start special ACP AutoFocus script for scheduler 23-Oct-2013 03:11:12.9: ** Sequencer script "AutoFocusScheduler" failed: 23-Oct-2013 03:11:12.9: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 68 column 9. Script Context: 65: If Util.Prefs.AutoFocus.UseAcquireStar Then 66: Telescope.Tracking = True ' AcquireStar needs tracking scope 67: Else => 68: Call SUP.StartSlewJ2000("FocusArea", CT.RightAscension, CT.Declination) ^ 69: Call SUP.WaitForSlew() 70: End If 71: -- end -- 23-Oct-2013 03:11:12.9: ** Autofocus failed (n=7), will retry ASAP after 20 min. 23-Oct-2013 03:11:26.3: Dispatcher stopped at 23-Oct-2013 03:11:26 UTC 23-Oct-2013 03:11:26.3: **DISPATCHER INTERRUPT LEVEL 1 RECEIVED** 23-Oct-2013 03:15:54.8: Dispatcher started at 23-Oct-2013 03:15:54 UTC 23-Oct-2013 03:15:54.8: Priority: W[0]=1.00 23-Oct-2013 03:15:54.8: Transit Altitude: W[1]=0.00 23-Oct-2013 03:15:54.8: Highest Altitude: W[6]=0.00 23-Oct-2013 03:15:54.8: Lateness: W[5]=0.70 23-Oct-2013 03:15:54.8: Slew Distance: W[2]=0.30 23-Oct-2013 03:15:54.8: Retry Count: W[3]=0.20 23-Oct-2013 03:15:54.8: Meridian Crossing: W[4]=0.30 23-Oct-2013 03:15:54.8: Obs Conditions: W[7]=0.40 23-Oct-2013 03:15:54.8: Rising Plan Delay: disabled 23-Oct-2013 03:15:55.6: ++ Observatory Startup ++ 23-Oct-2013 03:15:55.6: Start ACP Sequencer's StartupObs script 23-Oct-2013 03:16:10.8: ++ Auto Focus ++ 23-Oct-2013 03:16:10.8: Doing initial autofocus. 23-Oct-2013 03:16:10.8: Start special ACP AutoFocus script for scheduler 23-Oct-2013 03:20:09.7: Next periodic autofocus ASAP after 23-Oct-2013 05:19:47 UTC 23-Oct-2013 03:20:09.7: Dispatcher cycle time: 0.0468001 sec. 23-Oct-2013 03:20:09.7: Acquire data for Observation SA110... 23-Oct-2013 03:20:09.7: (belongs to Project Landolt_2, Plan SA110) 23-Oct-2013 03:20:09.7: Send Observation SA110 to ACP Sequencer 23-Oct-2013 03:26:12.1: Acquisition time: 362.3418364 sec. 23-Oct-2013 03:26:12.1: Data for Observation SA110 acquired successfully. 23-Oct-2013 03:26:12.1: Image Efficiency: 49.7% 23-Oct-2013 03:26:12.1: Cycle Efficiency: 100.0% 23-Oct-2013 03:26:12.3: Dispatcher cycle time: 0.0624002 sec. 23-Oct-2013 03:26:12.3: Acquire data for Observation V0965_Per... 23-Oct-2013 03:26:12.3: (belongs to Project Nova_Monitoring, Plan V0965_Per) 23-Oct-2013 03:26:12.3: Send Observation V0965_Per to ACP Sequencer 23-Oct-2013 03:54:57.6: Acquisition time: 1725.3006303 sec. 23-Oct-2013 03:54:57.6: Data for Observation V0965_Per acquired successfully. 23-Oct-2013 03:54:57.6: Image Efficiency: 52.2% 23-Oct-2013 03:54:57.6: Cycle Efficiency: 100.0% 23-Oct-2013 03:54:57.8: Dispatcher cycle time: 0.0780001 sec. 23-Oct-2013 03:54:57.8: Acquire data for Observation IC_348... 23-Oct-2013 03:54:57.8: (belongs to Project Staels, Plan IC_348) 23-Oct-2013 03:54:57.8: Send Observation IC_348 to ACP Sequencer 23-Oct-2013 03:57:51.0: Acquisition time: 173.2539043 sec. 23-Oct-2013 03:57:51.0: Data for Observation IC_348 acquired successfully. 23-Oct-2013 03:57:51.1: Image Efficiency: 51.9% 23-Oct-2013 03:57:51.1: Cycle Efficiency: 99.9% 23-Oct-2013 03:57:51.2: Dispatcher cycle time: 0.0312 sec. 23-Oct-2013 03:57:51.2: Acquire data for Observation SN_2013ej... 23-Oct-2013 03:57:51.2: (belongs to Project AAVSO_Monitoring, Plan SN_2013ej) 23-Oct-2013 03:57:51.2: Send Observation SN_2013ej to ACP Sequencer 23-Oct-2013 04:31:31.4: Acquisition time: 2020.1723482 sec. 23-Oct-2013 04:31:31.4: Data for Observation SN_2013ej acquired successfully. 23-Oct-2013 04:31:31.4: Image Efficiency: 69.3% 23-Oct-2013 04:31:31.4: Cycle Efficiency: 100.0% 23-Oct-2013 04:31:31.6: Dispatcher cycle time: 0.0624001 sec. 23-Oct-2013 04:31:31.6: Acquire data for Observation SA111... 23-Oct-2013 04:31:31.6: (belongs to Project Landolt_2, Plan SA111) 23-Oct-2013 04:31:31.6: Send Observation SA111 to ACP Sequencer 23-Oct-2013 04:37:02.9: Acquisition time: 331.344582 sec. 23-Oct-2013 04:37:02.9: Data for Observation SA111 acquired successfully. 23-Oct-2013 04:37:02.9: Image Efficiency: 39.2% 23-Oct-2013 04:37:02.9: Cycle Efficiency: 100.0% 23-Oct-2013 04:37:03.1: Dispatcher cycle time: 0.0312001 sec. 23-Oct-2013 04:37:03.1: Acquire data for Observation SA1119... 23-Oct-2013 04:37:03.1: (belongs to Project Landolt_2, Plan SA1119) 23-Oct-2013 04:37:03.1: Send Observation SA1119 to ACP Sequencer 23-Oct-2013 04:41:22.1: Acquisition time: 259.022855 sec. 23-Oct-2013 04:41:22.1: Data for Observation SA1119 acquired successfully. 23-Oct-2013 04:41:22.1: Image Efficiency: 50.2% 23-Oct-2013 04:41:22.1: Cycle Efficiency: 100.0% 23-Oct-2013 04:41:22.3: Dispatcher cycle time: 0.0468001 sec. 23-Oct-2013 04:41:22.3: Acquire data for Observation SA93_317... 23-Oct-2013 04:41:22.3: (belongs to Project Landolt_1, Plan SA93_317) 23-Oct-2013 04:41:22.3: Doing 10 sets 23-Oct-2013 04:41:22.3: Send Observation SA93_317 to ACP Sequencer 23-Oct-2013 04:46:49.2: Send Observation SA93_317 to ACP Sequencer 23-Oct-2013 04:50:08.7: Send Observation SA93_317 to ACP Sequencer 23-Oct-2013 04:53:24.4: Send Observation SA93_317 to ACP Sequencer 23-Oct-2013 04:56:44.5: Send Observation SA93_317 to ACP Sequencer 23-Oct-2013 05:00:06.7: Send Observation SA93_317 to ACP Sequencer 23-Oct-2013 05:03:29.1: Send Observation SA93_317 to ACP Sequencer 23-Oct-2013 05:06:51.3: Send Observation SA93_317 to ACP Sequencer 23-Oct-2013 05:10:13.5: Send Observation SA93_317 to ACP Sequencer 23-Oct-2013 05:13:35.3: Send Observation SA93_317 to ACP Sequencer 23-Oct-2013 05:16:58.1: Acquisition time: 2135.6749509 sec. 23-Oct-2013 05:16:58.1: Data for Observation SA93_317 acquired successfully. 23-Oct-2013 05:16:58.1: Image Efficiency: 44.5% 23-Oct-2013 05:16:58.1: Cycle Efficiency: 100.0% 23-Oct-2013 05:19:00.4: Dispatcher cycle time: 0.0312001 sec. 23-Oct-2013 05:19:00.4: Acquire data for Observation SA112_810... 23-Oct-2013 05:19:00.4: (belongs to Project Landolt_2, Plan SA112_810) 23-Oct-2013 05:19:00.4: Send Observation SA112_810 to ACP Sequencer 23-Oct-2013 05:23:52.6: Acquisition time: 292.1885132 sec. 23-Oct-2013 05:23:52.6: Data for Observation SA112_810 acquired successfully. 23-Oct-2013 05:23:52.6: Image Efficiency: 32.5% 23-Oct-2013 05:23:52.6: Cycle Efficiency: 100.0% 23-Oct-2013 05:23:52.7: ++ Auto Focus ++ 23-Oct-2013 05:23:52.8: Doing periodic autofocus. 23-Oct-2013 05:23:52.8: Start special ACP AutoFocus script for scheduler 23-Oct-2013 05:27:25.0: Next periodic autofocus ASAP after 23-Oct-2013 07:27:00 UTC 23-Oct-2013 06:49:06.0: Dispatcher cycle time: 0.0468001 sec. 23-Oct-2013 06:49:06.0: Acquire data for Observation KT_Eri... 23-Oct-2013 06:49:06.0: (belongs to Project Nova_Monitoring, Plan KT_Eri) 23-Oct-2013 06:49:06.0: Send Observation KT_Eri to ACP Sequencer 23-Oct-2013 07:01:36.1: ACP data acquisition failed for Observation KT_Eri. 23-Oct-2013 07:01:36.1: (Observation KT_Eri interrupted by acquisition process failure.) 23-Oct-2013 07:01:36.2: Dispatcher cycle time: 0.0468001 sec. 23-Oct-2013 07:01:36.2: Acquire data for Observation CB_32... 23-Oct-2013 07:01:36.2: (belongs to Project Staels, Plan CB_32) 23-Oct-2013 07:01:36.2: Send Observation CB_32 to ACP Sequencer 23-Oct-2013 07:04:36.6: Acquisition time: 180.3675168 sec. 23-Oct-2013 07:04:36.6: Data for Observation CB_32 acquired successfully. 23-Oct-2013 07:04:36.6: Image Efficiency: 49.9% 23-Oct-2013 07:04:36.6: Cycle Efficiency: 100.0% 23-Oct-2013 07:22:34.5: Dispatcher cycle time: 0.0312001 sec. 23-Oct-2013 07:22:34.5: Acquire data for Observation MP_Gem... 23-Oct-2013 07:22:34.5: (belongs to Project Staels, Plan MP_Gem) 23-Oct-2013 07:22:34.5: Send Observation MP_Gem to ACP Sequencer 23-Oct-2013 07:26:23.4: Acquisition time: 228.899202 sec. 23-Oct-2013 07:26:23.4: Data for Observation MP_Gem acquired successfully. 23-Oct-2013 07:26:23.4: Image Efficiency: 59.0% 23-Oct-2013 07:26:23.4: Cycle Efficiency: 100.0% 23-Oct-2013 07:27:24.6: ++ Auto Focus ++ 23-Oct-2013 07:27:24.6: Doing periodic autofocus. 23-Oct-2013 07:27:24.6: Start special ACP AutoFocus script for scheduler 23-Oct-2013 07:30:58.3: Next periodic autofocus ASAP after 23-Oct-2013 09:30:38 UTC 23-Oct-2013 07:38:39.6: Dispatcher cycle time: 0.0312001 sec. 23-Oct-2013 07:38:39.6: Acquire data for Observation KH_15D... 23-Oct-2013 07:38:39.7: (belongs to Project Staels, Plan KH_15D) 23-Oct-2013 07:38:39.7: Send Observation KH_15D to ACP Sequencer 23-Oct-2013 07:47:26.9: Acquisition time: 527.187326 sec. 23-Oct-2013 07:47:26.9: Data for Observation KH_15D acquired successfully. 23-Oct-2013 07:47:26.9: Image Efficiency: 45.5% 23-Oct-2013 07:47:26.9: Cycle Efficiency: 100.0% 23-Oct-2013 07:47:27.1: Dispatcher cycle time: 0.0624001 sec. 23-Oct-2013 07:47:27.1: Acquire data for Observation SA96_171... 23-Oct-2013 07:47:27.1: (belongs to Project Landolt_1, Plan SA96_171) 23-Oct-2013 07:47:27.1: Send Observation SA96_171 to ACP Sequencer 23-Oct-2013 07:51:35.7: Acquisition time: 248.6800367 sec. 23-Oct-2013 07:51:35.7: Data for Observation SA96_171 acquired successfully. 23-Oct-2013 07:51:35.8: Image Efficiency: 38.2% 23-Oct-2013 07:51:35.8: Cycle Efficiency: 100.0% 23-Oct-2013 07:51:35.9: Dispatcher cycle time: 0.0624001 sec. 23-Oct-2013 07:51:35.9: Acquire data for Observation SDSS073224... 23-Oct-2013 07:51:35.9: (belongs to Project AGN, Plan SDSS073224) 23-Oct-2013 07:51:36.0: Send Observation SDSS073224 to ACP Sequencer 23-Oct-2013 07:55:40.0: ACP data acquisition failed for Observation SDSS073224. 23-Oct-2013 07:55:40.0: (Observation SDSS073224 interrupted by acquisition process failure.) 23-Oct-2013 07:55:40.2: Dispatcher cycle time: 0.0312 sec. 23-Oct-2013 07:55:40.2: Acquire data for Observation V0959_Mon... 23-Oct-2013 07:55:40.2: (belongs to Project Nova_Monitoring, Plan V0959_Mon) 23-Oct-2013 07:55:40.2: Send Observation V0959_Mon to ACP Sequencer 23-Oct-2013 08:09:38.9: Acquisition time: 838.7354731 sec. 23-Oct-2013 08:09:38.9: Data for Observation V0959_Mon acquired successfully. 23-Oct-2013 08:09:38.9: Image Efficiency: 75.1% 23-Oct-2013 08:09:38.9: Cycle Efficiency: 100.0% 23-Oct-2013 08:09:39.1: Dispatcher cycle time: 0.0624001 sec. 23-Oct-2013 08:09:39.1: Acquire data for Observation SA52_56... 23-Oct-2013 08:09:39.1: (belongs to Project Landolt_2, Plan SA52_56) 23-Oct-2013 08:09:39.1: Send Observation SA52_56 to ACP Sequencer 23-Oct-2013 08:13:44.8: Acquisition time: 245.6380314 sec. 23-Oct-2013 08:13:44.8: Data for Observation SA52_56 acquired successfully. 23-Oct-2013 08:13:44.8: Image Efficiency: 38.7% 23-Oct-2013 08:13:44.8: Cycle Efficiency: 100.0% 23-Oct-2013 08:13:44.9: Dispatcher cycle time: 0.0468001 sec. 23-Oct-2013 08:13:44.9: Acquire data for Observation T_Ori... 23-Oct-2013 08:13:44.9: (belongs to Project AAVSO_Monitoring, Plan T_Ori) 23-Oct-2013 08:13:44.9: Doing 3 sets 23-Oct-2013 08:13:44.9: Send Observation T_Ori to ACP Sequencer 23-Oct-2013 08:16:18.6: Send Observation T_Ori to ACP Sequencer 23-Oct-2013 08:17:46.6: Send Observation T_Ori to ACP Sequencer 23-Oct-2013 08:19:14.8: Acquisition time: 329.8001791 sec. 23-Oct-2013 08:19:14.8: Data for Observation T_Ori acquired successfully. 23-Oct-2013 08:19:14.8: Image Efficiency: 27.3% 23-Oct-2013 08:19:14.8: Cycle Efficiency: 100.0% 23-Oct-2013 08:26:25.3: Dispatcher cycle time: 0.0312 sec. 23-Oct-2013 08:26:25.3: Acquire data for Observation NGC_2438... 23-Oct-2013 08:26:25.4: (belongs to Project Staels, Plan NGC_2438) 23-Oct-2013 08:26:25.4: Send Observation NGC_2438 to ACP Sequencer 23-Oct-2013 08:31:14.1: Acquisition time: 288.7877073 sec. 23-Oct-2013 08:31:14.1: Data for Observation NGC_2438 acquired successfully. 23-Oct-2013 08:31:14.2: Image Efficiency: 62.3% 23-Oct-2013 08:31:14.2: Cycle Efficiency: 100.0% 23-Oct-2013 09:29:16.5: Dispatcher cycle time: 0.0312 sec. 23-Oct-2013 09:29:16.5: Acquire data for Observation V838_Mon... 23-Oct-2013 09:29:16.5: (belongs to Project AAVSO_Monitoring, Plan V838_Mon) 23-Oct-2013 09:29:16.5: Doing 5 sets 23-Oct-2013 09:29:16.5: Send Observation V838_Mon to ACP Sequencer 23-Oct-2013 09:33:12.5: ACP data acquisition failed for Observation V838_Mon. 23-Oct-2013 09:33:12.5: (Observation V838_Mon interrupted by acquisition process failure.) 23-Oct-2013 09:33:12.6: ++ Auto Focus ++ 23-Oct-2013 09:33:12.6: Doing periodic autofocus. 23-Oct-2013 09:33:12.6: Start special ACP AutoFocus script for scheduler 23-Oct-2013 09:36:37.9: Next periodic autofocus ASAP after 23-Oct-2013 11:36:08 UTC 23-Oct-2013 09:36:37.9: Dispatcher cycle time: 0.0468001 sec. 23-Oct-2013 09:36:37.9: Acquire data for Observation SA68_216... 23-Oct-2013 09:36:37.9: (belongs to Project Landolt_2, Plan SA68_216) 23-Oct-2013 09:36:37.9: Send Observation SA68_216 to ACP Sequencer 23-Oct-2013 09:41:05.1: Acquisition time: 267.1660693 sec. 23-Oct-2013 09:41:05.1: Data for Observation SA68_216 acquired successfully. 23-Oct-2013 09:41:05.1: Image Efficiency: 35.6% 23-Oct-2013 09:41:05.1: Cycle Efficiency: 100.0% 23-Oct-2013 09:41:05.3: Dispatcher cycle time: 0.0468001 sec. 23-Oct-2013 09:41:05.3: Acquire data for Observation SA100_267... 23-Oct-2013 09:41:05.3: (belongs to Project Landolt_2, Plan SA100_267) 23-Oct-2013 09:41:05.3: Send Observation SA100_267 to ACP Sequencer 23-Oct-2013 09:46:37.9: Acquisition time: 332.6549843 sec. 23-Oct-2013 09:46:37.9: Data for Observation SA100_267 acquired successfully. 23-Oct-2013 09:46:37.9: Image Efficiency: 28.6% 23-Oct-2013 09:46:37.9: Cycle Efficiency: 100.0% 23-Oct-2013 09:46:38.1: Dispatcher cycle time: 0.0468001 sec. 23-Oct-2013 09:46:38.1: Acquire data for Observation SA98... 23-Oct-2013 09:46:38.1: (belongs to Project Landolt_1, Plan SA98) 23-Oct-2013 09:46:38.1: Send Observation SA98 to ACP Sequencer 23-Oct-2013 09:51:24.5: Acquisition time: 286.385303 sec. 23-Oct-2013 09:51:24.5: Data for Observation SA98 acquired successfully. 23-Oct-2013 09:51:24.5: Image Efficiency: 45.4% 23-Oct-2013 09:51:24.5: Cycle Efficiency: 100.0% 23-Oct-2013 10:01:09.2: Dispatcher cycle time: 0.0468001 sec. 23-Oct-2013 10:01:09.2: Acquire data for Observation SA52_56... 23-Oct-2013 10:01:09.2: (belongs to Project Landolt_1, Plan SA52_56) 23-Oct-2013 10:01:09.2: Send Observation SA52_56 to ACP Sequencer 23-Oct-2013 10:05:15.3: Acquisition time: 246.0748322 sec. 23-Oct-2013 10:05:15.3: Data for Observation SA52_56 acquired successfully. 23-Oct-2013 10:05:15.3: Image Efficiency: 38.6% 23-Oct-2013 10:05:15.3: Cycle Efficiency: 100.0% 23-Oct-2013 10:14:59.9: Dispatcher cycle time: 0.0312 sec. 23-Oct-2013 10:14:59.9: Acquire data for Observation SA44_28... 23-Oct-2013 10:15:00.0: (belongs to Project Landolt_2, Plan SA44_28) 23-Oct-2013 10:15:00.0: Send Observation SA44_28 to ACP Sequencer 23-Oct-2013 10:20:35.5: Acquisition time: 335.5721894 sec. 23-Oct-2013 10:20:35.5: Data for Observation SA44_28 acquired successfully. 23-Oct-2013 10:20:35.5: Image Efficiency: 28.3% 23-Oct-2013 10:20:35.5: Cycle Efficiency: 100.0% 23-Oct-2013 10:31:21.9: Dispatcher cycle time: 0.0312001 sec. 23-Oct-2013 10:31:21.9: Acquire data for Observation SA93_317... 23-Oct-2013 10:31:21.9: (belongs to Project Landolt_2, Plan SA93_317) 23-Oct-2013 10:31:21.9: Doing 10 sets 23-Oct-2013 10:31:21.9: Send Observation SA93_317 to ACP Sequencer 23-Oct-2013 10:35:22.5: Send Observation SA93_317 to ACP Sequencer 23-Oct-2013 10:38:42.3: Send Observation SA93_317 to ACP Sequencer 23-Oct-2013 10:42:02.3: Send Observation SA93_317 to ACP Sequencer 23-Oct-2013 10:45:21.7: Send Observation SA93_317 to ACP Sequencer 23-Oct-2013 10:48:53.7: Send Observation SA93_317 to ACP Sequencer 23-Oct-2013 10:52:16.0: Send Observation SA93_317 to ACP Sequencer 23-Oct-2013 10:55:36.7: Send Observation SA93_317 to ACP Sequencer 23-Oct-2013 10:59:00.8: Send Observation SA93_317 to ACP Sequencer 23-Oct-2013 11:02:25.0: Send Observation SA93_317 to ACP Sequencer 23-Oct-2013 11:05:50.5: Acquisition time: 2068.4700329 sec. 23-Oct-2013 11:05:50.5: Data for Observation SA93_317 acquired successfully. 23-Oct-2013 11:05:50.5: Image Efficiency: 45.9% 23-Oct-2013 11:05:50.5: Cycle Efficiency: 100.0% 23-Oct-2013 11:05:50.7: Dispatcher cycle time: 0.0780002 sec. 23-Oct-2013 11:05:50.7: Acquire data for Observation SA99_438... 23-Oct-2013 11:05:50.7: (belongs to Project Landolt_1, Plan SA99_438) 23-Oct-2013 11:05:50.7: Send Observation SA99_438 to ACP Sequencer 23-Oct-2013 11:10:12.7: Acquisition time: 262.0024602 sec. 23-Oct-2013 11:10:12.7: Data for Observation SA99_438 acquired successfully. 23-Oct-2013 11:10:12.7: Image Efficiency: 21.0% 23-Oct-2013 11:10:12.7: Cycle Efficiency: 100.0% 23-Oct-2013 11:10:12.9: Dispatcher cycle time: 0.0468001 sec. 23-Oct-2013 11:10:12.9: Acquire data for Observation V5582_Sgr... 23-Oct-2013 11:10:12.9: (belongs to Project Nova_Monitoring, Plan V5582_Sgr) 23-Oct-2013 11:10:12.9: Send Observation V5582_Sgr to ACP Sequencer 23-Oct-2013 11:46:44.9: ACP data acquisition failed for Observation V5582_Sgr. 23-Oct-2013 11:46:44.9: (Observation V5582_Sgr interrupted by acquisition process failure.) 23-Oct-2013 11:46:45.0: ++ Auto Focus ++ 23-Oct-2013 11:46:45.0: Doing periodic autofocus. 23-Oct-2013 11:46:45.0: Start special ACP AutoFocus script for scheduler 23-Oct-2013 11:49:28.5: Next periodic autofocus ASAP after 23-Oct-2013 13:49:17 UTC 23-Oct-2013 11:49:28.5: Dispatcher cycle time: 0.0312 sec. 23-Oct-2013 11:49:28.5: Acquire data for Observation SA100_267... 23-Oct-2013 11:49:28.5: (belongs to Project Landolt_1, Plan SA100_267) 23-Oct-2013 11:49:28.5: Send Observation SA100_267 to ACP Sequencer 23-Oct-2013 11:53:43.4: Acquisition time: 254.9044477 sec. 23-Oct-2013 11:53:43.4: Data for Observation SA100_267 acquired successfully. 23-Oct-2013 11:53:43.4: Image Efficiency: 37.3% 23-Oct-2013 11:53:43.4: Cycle Efficiency: 100.0% 23-Oct-2013 12:23:30.3: ++ Dawn Flats ++ 23-Oct-2013 12:23:30.3: Start ACP AutoFlat script for Dawn 23-Oct-2013 13:11:45.4: -- Observatory Shutdown -- 23-Oct-2013 13:11:45.4: Weather disconnected. 23-Oct-2013 13:11:45.4: Start ACP Sequencer's ShutdownObs script 23-Oct-2013 13:15:14.2: Weather successfully connected. Wait for valid data... 23-Oct-2013 18:53:36.3: Run statistics: 23-Oct-2013 18:53:36.3: Observations: 111 23-Oct-2013 18:53:36.3: Considered: 52 23-Oct-2013 18:53:36.3: Completed: 24 23-Oct-2013 18:53:36.3: Skipped: 0 23-Oct-2013 18:53:36.3: Never Eligible: 59 23-Oct-2013 18:53:36.3: Failed: 28 Log closed at Wed, Oct 23 2013 18:53:36 UTC (actual time)