Differences

This shows you the differences between two versions of the page.

--- sumjulyevent [2025/07/09 13:41] – astroadmin
+++ sumjulyevent [2025/07/09 14:37] (current) – astroadmin
@@ Line 12: / Line 12: @@
 === Ongoing Issues ===
-The limit triggers that define open and close being compromised is one of the main issues we currently face. Additionally, the tension in the pulley system is not correct, causing slack when the dome is opened and closed (Slack is removed over time as the dome sits). Likely, as a result of the incorrect tension in the system, the dome does not have smooth motion when closing (but does when it is opening). Barrings at the top need to be lubicated.
+The limit triggers that define open and close being compromised is one of the main issues we currently face. Additionally, the tension in the pulley system is not correct, causing slack when the dome is opened and closed (Slack is removed over time as the dome sits). Likely, as a result of the incorrect tension in the system, the dome does not have smooth motion when closing (but does when it is opening). Barings at the top need to be lubricated.
+=== Current State ===
+Zach has removed the battery connection from the shutter, thus rendering the shutter incapable of opening. Zach was also able to slightly adjust the cables to allow the dome's ramp to be the cause of the trigger to the closed trigger switch. **HOWEVER** there is still concerns about the tension of the cable.