User Tools

Site Tools


ssp_procedures

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
ssp_procedures [2025/06/12 03:30] sspssp_procedures [2025/06/12 04:02] (current) ssp
Line 1: Line 1:
-This is a draft version of the procedures for remote, real-time observing at TMO during SSP 2025. **THIS IS A WORK IN PROGRESS. last edited: 03 June 2025 (AWR)**+These are procedures for remote, real-time observing at TMO during SSP 2025. **last edited: 11 June 2025 (AWR)**
  
 **__Remote Observing Center__** **__Remote Observing Center__**
  
-SSP NMSU 2025 will be using the 24"B&C telescope at [[start|Tortugas Mountain Observatory]]. Observing will be done from Astronomy Building Rm 119, a.k.a. the TMO Remote Observing Center, a.k.a. the ROC.+SSP NMSU 2025 will be using the 24" B&C telescope at [[start|Tortugas Mountain Observatory]]. Observing will be done from Astronomy Building Rm 119, a.k.a. the TMO Remote Observing Center, a.k.a. the ROC.
  
 **__Observing Team Responsibilities__** **__Observing Team Responsibilities__**
Line 34: Line 34:
 **__Keep an eye on things at TMO__** **__Keep an eye on things at TMO__**
  
-The General Monitoring task should always have an open browser window with the [[http://tmocam.nmsu.edu/|TMO IR camera]]TMO IR camera. The IR camera sometimes wants you to re-enter a username/passwd. Those are on the whiteboard in the ROC+The General Monitoring task should always have an open browser window with the [[http://tmocam.nmsu.edu/|TMO IR camera]].
  
 To turn the IR lamp on and off, Click Setup, then click IR Light (Mode = Off is off and Mode = Manual is on) & always remember to click save. To turn the IR lamp on and off, Click Setup, then click IR Light (Mode = Off is off and Mode = Manual is on) & always remember to click save.
Line 134: Line 134:
   - Set the camera to take "single" exposures.   - Set the camera to take "single" exposures.
   - Leave the camera cooled for the next team.   - Leave the camera cooled for the next team.
-  - If applicable, stop the guiding (guide tab of camera control) 
   - Rearrange the windows in an orderly way (see the screenshot above).   - Rearrange the windows in an orderly way (see the screenshot above).
   - Park the telescope (SiTech, under the "Scope" tab).   - Park the telescope (SiTech, under the "Scope" tab).
Line 153: Line 152:
   - Park the telescope (SiTech, under the “Scope” tab)   - Park the telescope (SiTech, under the “Scope” tab)
   - Stop the telescope (SiTech)   - Stop the telescope (SiTech)
-  - Turn off the infrared lights in the dome (turn them off on both tabs).+  - Turn off the infrared lights in the dome.
   - Turn off the camera cooler (MaxIm DL Camera Control)   - Turn off the camera cooler (MaxIm DL Camera Control)
  
ssp_procedures.1749699006.txt.gz · Last modified: 2025/06/12 03:30 by ssp

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki