Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | |
| ssp_procedures [2025/07/03 13:58] – astroadmin | ssp_procedures [2025/07/03 14:10] (current) – astroadmin |
|---|
| - Instead of five 1-min exposures, take ten 30-sec exposures. | - Instead of five 1-min exposures, take ten 30-sec exposures. |
| |
| **"SHUTTER ERROR" appears on the status of the ACP dome control window.** - **FIRST** Please check using the tmocam if the shutter is partially opened or closed. **If the shutter is not fully closed / opened when this error occurs, stop everything and call Zach!**. If the shutter is fully open or closed, proceed with the following: | **"SHUTTER ERROR" appears on the status of the ACP dome control window.** - **FIRST** Please check using the tmocam if the shutter is partially opened or closed. **If the shutter is not fully closed / opened when this error occurs, stop everything and call Zach! (or if ACP asks you to "Force close the dome"**. If the shutter is fully open or closed, proceed with the following: |
| |
| This tends to happen exclusively when the shutter is near-ish the scope's park position (Aziumuth ~110). Some variation in the metal / position causes the physical dome shutter switch to no longer be triggered / read in this very particular spot. If you see this **DO NOT FREAK OUT**! This is a recoverable error! If you need to move the dome out of the position that is causing "SHUTTER ERROR", please do the following: | This tends to happen exclusively when the shutter is near-ish the scope's park position (Aziumuth ~110). Some variation in the metal / position causes the physical dome shutter switch to no longer be triggered / read in this very particular spot. If you see this **DO NOT FREAK OUT**! This is a recoverable error! If you need to move the dome out of the position that is causing "SHUTTER ERROR", please do the following: |
