observing_procedure
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| observing_procedure [2026/09/11 21:03] – [Status window] jasonj | observing_procedure [2026/09/11 22:33] (current) – 24.4.246.2 | ||
|---|---|---|---|
| Line 8: | Line 8: | ||
| * guider : process that waits for guide commands from aposong | * guider : process that waits for guide commands from aposong | ||
| * video1m : shows a continuous webcam view using the VLC player (more practical than the web interface for the webcam, which you would need to point the webcam). There should be a browser open for the web interface if needed. | * video1m : shows a continuous webcam view using the VLC player (more practical than the web interface for the webcam, which you would need to point the webcam). There should be a browser open for the web interface if needed. | ||
| - | * override : xxx | + | * override : runs the webapp that allows APO operators to allow 1m to open even if their telescopes are not yet open, if they deem conditions reliable |
| - | On the second desktop, | + | On the second desktop, |
| + | * spectro_app : runs the Alpyca server for control of chiller, relays | ||
| + | * ASCOM Remote : provides Alpaca access to ASCOM driver for QHY 600 (click the desktop icon to start it) | ||
| + | |||
| + | On the third desktop, have a vnc window logged into pwi1m (vncviewer pwi1m.apo.nmsu.edu from a song1m terminal), | ||
| + | * PWI4 : open from desktop icon | ||
| + | * ASCOM Remote : provides Alpaca access too ASCOM drivers for telescope, CCD cameras (open from desktop icon) | ||
| + | * dome_app : runs the Alpyca server for control of stages, iodine thermal controll | ||
| - | On the third desktop, | ||
| - | In addition to this, processes must be running on the machines dome1m, pwi1m, and spec1m, but these are generally fairly stable, and only need to be checked in case of issues. | ||
| Under normal operations, robotic observing is accomplished with a single command in aposong. For example: | Under normal operations, robotic observing is accomplished with a single command in aposong. For example: | ||
| Line 21: | Line 26: | ||
| robotic.observe(focstart=33200, | robotic.observe(focstart=33200, | ||
| </ | </ | ||
| - | where focstart is an inital focus guess, and disp is a pyvista display object if you want to see images as they are being taken. | + | where focstart is an inital focus guess that may need to be adjusted seasonally, and disp is a pyvista display object if you want to see images as they are being taken. |
| The basic robotic workflow is: | The basic robotic workflow is: | ||
| Line 50: | Line 55: | ||
| ==== Status window ==== | ==== Status window ==== | ||
| - | The status process shows a diagnostic window such as the figure below | + | The status process |
| {{ : | {{ : | ||
| - | This window | + | This window |
| * x | * x | ||
| * y | * y | ||
| Line 75: | Line 80: | ||
| * if not closed, or if closed but telescope not in park position, issue domeclose() command from an aposong window (you may wish to start a new one if you want to leave the incompleted observing one open for inspection) | * if not closed, or if closed but telescope not in park position, issue domeclose() command from an aposong window (you may wish to start a new one if you want to leave the incompleted observing one open for inspection) | ||
| * if dome does not close, may need to call APO! | * if dome does not close, may need to call APO! | ||
| + | * if telescope is not parked, make sure mirror covers are closed with mirror_covers() and then T.park() | ||
| * to determine failure mode: | * to determine failure mode: | ||
| * attempt to understand where script failed | * attempt to understand where script failed | ||
| * check guider window to see if guider program is still running | * check guider window to see if guider program is still running | ||
| * check for any errors in status window | * check for any errors in status window | ||
| - | * check pwi1m computer to see if Planewave had issues, either | + | * check pwi1m computer to see if Planewave had issues, either |
| * check spec1m computer to ensure ASCOM Remote and Alpyca server are running | * check spec1m computer to ensure ASCOM Remote and Alpyca server are running | ||
observing_procedure.1789160606.txt.gz · Last modified: by jasonj